• 제목/요약/키워드: National Artifact

검색결과 284건 처리시간 0.022초

한국 청동기시대 '사회' 고고학의 문제 (The Problems of the Archaeological Approaches to the Bronze Age Society)

  • 이성주
    • 고문화
    • /
    • 68호
    • /
    • pp.7-24
    • /
    • 2006
  • 이 논문은 한반도 청동기시대 '사회' 고고학을 어떠한 관점과 방법으로 연구할 것인가를 검토해 보고자 작성되었다. 먼저 한국의 '사회' 고고학 접근을 연구사적으로 검토하였는데 1970년대까지는 민족사의 흐름과 같이 모호한 실체와 과정으로 사회진화의 단계를 서술하는데 그쳤다고 보았다. 이러한 관념에서 벗어나 단위사회의 규모와 지배권력의 성격 등에 주목하기 시작한 것은 1980년대부터였고, 고고학 자료의 위계와 분포를 분석하여 사회단위와 그 조직을 복원해 보려는 노력은 1990년대 들어와서야 가능했다고 보았다. 그리고 영미와 일본 고고학에서 이루어진 사회에 대한 접근의 틀을 참고하여 청동기시대 취락을 분석하기 시작한 것은 불과 10년 전의 일이다. 다음으로, 어떤 고고학적 실체를 지칭하는 용어로 정착된 'OO유형' 이라는 개념과 종족집단의 존재가 전제된 문화단위에 대한 관념들을 비판적으로 검토하였다. 청동기시대 고고학자들은 한편으로 취락 내부와 취락 간의 유물분포를 분석하여 사회적인 특성들은 정의하고 있지만 다른 한편으로는 'OO유형' 이라는 문화적 실체의 생성과 확장, 및 소멸에 관한 논의를 하고 있는데 이것은 생산적인 '사회' 고고학 연구에 전혀 도움이 안 된다고 보았다. 비파형동검과 같이 광역으로 분포하는 물질문화의 요소들을 고대 종족명과 관련시키는 연구관점에 대해 비판하였다. 이와 같이 광역으로 분포하는 물질문화의 존재는 지역집단들 사이에 형성된 모종의 관계망으로 설명할 필요가 있으며 나아가 이러한 관계망을 통해 이루어지는 상호작용의 성격과 함께 그 물질문화의 상징적 의미가 지역에 따라 어떻게 변용되는지에 대해서 검토될 필요가 있다고 보았다.

  • PDF

Epoxy 수지 경화제에 따른 Putty 개발에 관한 연구 (Study on the Development of Putty According to Epoxy Resin Hardener)

  • 오승준;정다솜;박기정;위광철
    • 보존과학회지
    • /
    • 제31권2호
    • /
    • pp.105-114
    • /
    • 2015
  • 본 연구에서는 유물의 보존 처리 과정에서 결손 부위의 복원을 위해 적용 가능한 다목적용 복원재료로써 Epoxy Putty를 개발하고자 하였다. 기존에 사용되고 있는 재료의 물성에서 드러난 높은 강도로 인한 가공성의 문제, 작업 과정 중 긴 경화 시간으로 인한 처짐 현상, 도구나 장갑에 묻어 유물의 표면을 오염시키는 등의 문제점을 해결하기 위해, 1차적으로 현재 많이 사용되고 있는 Epoxy Putty 형태의 복원 재료 물성을 파악한 후 이를 비교 대상으로 선택하여 경화제와 충전제의 종류에 따른 Epoxy Putty를 개발하였다. 개발 된 Epoxy Putty는 기존 재료의 문제점 해결 및 유사한 물성을 지니기 위해 성상(性狀)이 다른 2종의 경화제를 선정하여 물성 실험을 실시하였다. 경화제로는 Mercaptan 계열의 경화제와 Aliphatic amine 계통의 경화제 2종을 선택하여 개발하였다. 연구 결과 2종 모두 Paste 형태로 경화 시간은 5~10분 내외로 기존 재료에 비해 약 3~10배 정도 짧아 작업의 편리성을 높였으며, 가공성을 높이기 위한 마모율은 약 3배 정도 향상시켜 쉽게 사용할 수 있도록 하였으며, 작업 중 발생하는 표면 오염 등의 단점을 보완하기 위해 충전제로 백색의 Micro-balloon을 첨가하여 사용 중 손에 묻어 나오는 끈적거리는 현상을 줄여주었을 뿐만 아니라 Coloring, 경량성, 절삭력 등이 높은 저수축 및 가공성이 우수한 다목적 복원 재료를 개발하였다.

LMS 적응필터를 이용한 직교 함수 기반의CPR 잡음 제거 알고리즘 설계 (Design of CPR Artifact Removal Algorithm Based on Orthogonal Function using LMS Adaptive Filter)

  • 임은호;남동훈;명현석;강동원;전대근;윤영로;이경중
    • 대한의용생체공학회:의공학회지
    • /
    • 제37권5호
    • /
    • pp.153-160
    • /
    • 2016
  • This study proposes an algorithm for removal of CPR artifact in order that automated external defibrillator (AED) can effectively diagnose ECG rhythm during cardiopulmonary resuscitation (CPR). Current AED required to interrupt chest compression for reliable rhythm analysis to avoid the effect of artifacts produced by CPR. However even temporarily interruption of chest compression during CPR adversely affects the probability of restoration of spontaneous circulation (ROSC) and survival after the delivery of the shock. Therefore, we proposed a method for removal of CPR artifacts using least mean square (LMS) filter. The removal of the CPR artifacts would enable compressions to continue during AED rhythm analysis, thereby increasing the likelihood of resuscitation success. It was tested on 31 segments of shockable and 300 segments of non-shockable ECG signals recorded from three pigs during CPR. In the result, sensitivity (Se) and specificity (Sp) analysis on the test segments showed values of Se = 3.2%, Sp = 66.0% and Se = 96.8%, Sp = 98.7% in the case of unfiltered and filtered signals during CPR. In conclusion, it was shown that the proposed method can be a useful tool to exactly diagnose the ECG rhythm during the CPR.

웨이블릿 변환을 이용한 영상복원의 물결현상 제거 방법 (Ringing Artifact Removal in Image Restoration Using Wavelet Transform)

  • 윤진영;유윤종;전신영;신정호;백준기
    • 대한전자공학회논문지SP
    • /
    • 제45권6호
    • /
    • pp.78-87
    • /
    • 2008
  • 디지털 영상이 멀티미디어의 핵심 매체로 자리를 잡게 되면서 영상의 열화요인을 제거하여 원래의 품질에 가깝게 개선하는 영상 복원기술의 활용분야가 더욱 늘어나고 있다. 그러나 영상복원을 수행할 때 영상의 열화(degradation)가 선형공간불변이라고 가정하기 때문에 주파수영역에서 영상복원을 수행하면 그 결과 에지와 같이 밝기값의 변화가 큰 영역 주변에서 물결현상(ringing)이 나타나는 단점이 있다. 본 논문은 물결현상 제거를 위해 새로운 적응적 후처리 필터링 방법을 제안한다. 제안하는 알고리즘은 웨이블릿 변환을 사용하여 영상을 해석하고 에지 맵을 추출하고 영역을 나누어 에지영역과 물결현상을 검출한 후 이를 쌍방향필터(bilateral filter)를 이용해 제거한다. 실험결과를 통해서 제안하는 방법이 효과적으로 물결현상을 제거하는 동시에 중요한 에지를 보존할 수 있음을 확인할 수 있다.

Assessment of the efficiency of a pre- versus post-acquisition metal artifact reduction algorithm in the presence of 3 different dental implant materials using multiple CBCT settings: An in vitro study

  • Shahmirzadi, Solaleh;Sharaf, Rana A.;Saadat, Sarang;Moore, William S.;Geha, Hassem;Tamimi, Dania;Kocasarac, Husniye Demirturk
    • Imaging Science in Dentistry
    • /
    • 제51권1호
    • /
    • pp.1-7
    • /
    • 2021
  • Purpose: The aim of this study was to assess artifacts generated in cone-beam computed tomography (CBCT) of 3 types of dental implants using 3 metal artifact reduction (MAR) algorithm conditions (pre-acquisition MAR, post-acquisition MAR, and no MAR), and 2 peak kilovoltage (kVp) settings. Materials and Methods: Titanium-zirconium, titanium, and zirconium alloy implants were placed in a dry mandible. CBCT images were acquired using 84 and 90 kVp and at normal resolution for all 3 MAR conditions. The images were analyzed using ImageJ software (National Institutes of Health, Bethesda, MD) to calculate the intensity of artifacts for each combination of material and settings. A 3-factor analysis of variance model with up to 3-way interactions was used to determine whether there was a statistically significant difference in the mean intensity of artifacts associated with each factor. Results: The analysis of all 3 MAR conditions showed that using no MAR resulted in substantially more severe artifacts than either of the 2 MAR algorithms for the 3 implant materials; however, there were no significant differences between pre- and post-acquisition MAR. The 90 kVp setting generated less intense artifacts on average than the 84 kVp setting. The titanium-zirconium alloy generated significantly less intense artifacts than zirconium. Titanium generated artifacts at an intermediate level relative to the other 2 implant materials, but was not statistically significantly different from either. Conclusion: This in vitro study suggests that artifacts can be minimized by using a titanium-zirconium alloy at the 90 kVp setting, with either MAR setting.

DSA에 대한 기술적 고찰 (The Technologic Consideration of Using for DSA)

  • 조영기
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제17권2호
    • /
    • pp.13-20
    • /
    • 1994
  • The paper is on the record of radiography the patients with SIEMENS ANGIOSTAR/POLYTRON S PLUS angiosystem with DSA system in the Chonbuk National University Hospital from October 1993 to June 1994. The results are as follow : 1. Among the total No, 836 case of utilization, angiography are 316(37.8 %), interventional radiography are 256(34.2 %), and dacryocystography and sialography are 168(20/1 %). Therefore non-angiogrlphy procedure are incerasing. 2. The aomunt of contrast material used are half as much as conventional angiovascular system. 3. The amount of film consumed are $10{\sim}15%$ of that of conventional angio vascular system and reduction of procedure time are $40{\sim}50%$. 4. Admitting that dignostic utility is in the utilization by examination region, there should be technological study which deal with fine vessel and motion artifact problem.

  • PDF

Adaptive Watermark Detection Algorithm Using Perceptual Model and Statistical Decision Method Based on Multiwavelet Transform

  • Hwang Eui-Chang;Kim Dong Kyue;Moon Kwang-Seok;Kwon Ki-Ryong
    • 한국멀티미디어학회논문지
    • /
    • 제8권6호
    • /
    • pp.783-789
    • /
    • 2005
  • This paper is proposed a watermarking technique for copyright protection of multimedia contents. We proposed adaptive watermark detection algorithm using stochastic perceptual model and statistical decision method in DMWT(discrete multi wavelet transform) domain. The stochastic perceptual model calculates NVF(noise visibility function) based on statistical characteristic in the DMWT. Watermark detection algorithm used the likelihood ratio depend on Bayes' decision theory by reliable detection measure and Neyman-Pearson criterion. To reduce visual artifact of image, in this paper, adaptively decide the embedding number of watermark based on DMWT, and then the watermark embedding strength differently at edge and texture region and flat region embedded when watermark embedding minimize distortion of image. In experiment results, the proposed statistical decision method based on multiwavelet domain could decide watermark detection.

  • PDF

방사성탄소연대 위글매칭에 의한 순천 송광사 불패의 연대측정 (Wiggle Matching Radiocarbon Dates of a Buddhist Wooden Tablet (Bulpae) at Songkwangsa Temple, Suncheon, Korea)

  • 연정아;박원규
    • 한국가구학회지
    • /
    • 제25권1호
    • /
    • pp.55-60
    • /
    • 2014
  • The objective of this study was to date a Buddhist wooden Tablet (No. 271) at Songkwangsa Temple, Suncheon, Korea, using wiggle matching of radiocarbon dates. For wiggle matching, three samples (2nd, 16th and 34~35th rings from inner side) in the pedestal of the Tablet were selected among total of 37 tree rings. Wiggle matching the radiocarbon dates of three samples resulted in A.D. 1660~1679 (95.4% confidence interval) for the outermost ring. This interval suggested the age of this tablet as the late 17th century, which was almost at the same age as other early Buddhist tablets in Korea.

  • PDF

원주 구룡사 소통(疎筒)의 수종 및 방사성탄소연대 분석 (Species Identification and Radiocarbon Dating of a Container for Written Prayers, Sotong, from Guryongsa Temple in Wonju)

  • 김요정;박원규
    • 한국가구학회지
    • /
    • 제25권1호
    • /
    • pp.72-78
    • /
    • 2014
  • The objectives of this study were to identify the species of a wooden container for written prayers, Sotong, from Guryongsa Temple in Wonju, which is currently stored in the Museum of Woljeongsa, and to date it using wiggle matching of radiocarbon dates. It was made exclusively of basswood, Tilia spp. Wiggle matching the radiocarbon dates of three rings resulted in A.D. 1670 to 1691 (${\pm}2{\sigma}$) for the outermost ring. This interval suggested the age of 'Guryongsa Sotong' as the late $17^{th}$ or early $18^{th}$ century, which became a first date on 'Sotong' in Korea.

  • PDF

과학 개념의 표현 양식별 학습 지속 효과 (An Analysis of the Momentum Effect by the Representation Patterns of Science Concepts)

  • 김준태;권재술
    • 한국과학교육학회지
    • /
    • 제14권2호
    • /
    • pp.111-122
    • /
    • 1994
  • This study tried to find the effect to the representation patterns of science concepts upon the momentum effect. The previous studies showed that the momentum effect is influenced by students' cognitive levels and the abstractness of test items. The representation patterns of science concepts are divided into 4 different types: quantitative and qualitative, verbal and image. The research method used in this study is time series design. The period is 50 days. The period is divided into "pre-lest", "intervention-test", "post-test". Pre-test period is 5 days and in this period class instruction does not exist. Intervention-lest period is 30 days and in this period class instruction exist. Post-test period is 15 days and in this period class instruction does not exist. The results showed longer momentum effect on the image-qualitative representation pattern than the other representation patterns. Qualitative concepts is formed better than quantitative. Momentum effects is not artifact but the essential characteristics of science study.

  • PDF