• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.85-91
• /
• 2015

We investigated the structure of inductive coupler and its magnetic coupling to increase the transmission coefficient for power line communication. A Rogowski coil, which is an air-cored inductive coupler, and a magnetic cored coupler were fabricated to analyze the transmission coefficient for different coupler parameters. This paper proposes the impedance matching method using lumped elements and an impedance transformer to increase the transmission coefficient. In the experiment, the transmission coefficient of the proposed system was increased in both narrowband and broadband cases, and a trade-off between the transmission coefficient and the bandwidth was shown. This method will be useful for the further study of impedance matching with the load variation.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.521-531
• /
• 2018

This paper presents a procedure for field measurements which provides a generalized Narrowband Power Line Communications (NB-PLC) channel model for low voltage (LV) access network in order to deploy advanced metering infrastructure (AMI) within Lahore, Pakistan. The measurements of allocated sites were performed in the residential (urban and rural), industrial and commercial electricity consumers for the NB-PLC channel modeling of overhead transmission lines (TLs). On the basis of extensive field measurement results, the average attenuation profile and transfer functions are presented. The results obtained from field measurements are validated by comparing them with a proposed Simulink model. A close agreement in the measured and simulated transfer function (TF) results is observed. The proposed Simulink model is an effort to model the NB-PLC channels in an effective way, especially in South Asian countries.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.169-184
• /
• 2002

In order to extract bearing information from the directional sensors of DIFAR(directional frequency analysis and recording) that is a kind of passive sonobuoy, the cardioid beamforming algorithm applicable to DIFAR system was studied in the frequency domain. the algorithm uses narrow-band signals propagated though the media from the acoustic sources such as ship machineries. The proposed algorithm is expected to give signal to noise ratio of 6dB when it uses the maximum response axis(MRA) among the Cardioid beams. The estimated bearings agree very well with those from GPS data. Assuming the bearings from GPS data to be real values, the estimation errors are analyzed statistically. The histogram of estimation errors in each frequency have Gaussian shape, the mean and standard deviation dropping in the ranges -1.1~$6.7^{\circ}$ and 13.3~$43.6^{\circ}$, respectively. Estimation errors are caused by SMR degradation due to propagation loss between the source and receiver, daily fluctuating geo-magnetic fields, and non-stationary background noises. If multiple DIFAR systems are employed, in addition to bearing, range information could be estimated and finally localization or tracking of a target is possible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.232-238
• /
• 2004

In this paper, radio propagation in a subway tunnel is investigated using fan beam antennas, circular polarization antennas and directional antennas at 2.4㎓ and 5.8㎓ band, respectively. The results of narrowband channel measurements show that received power level for NLOS(Non-Line-Of-Sight) path is decreased drastically as compared with LOS(Line-Of-Sight) path. Wideband channel measurements are obtained using a PN sliding correlation method. The parameters of the channel such as mean access delay and RMS delay spread are compared as to different types of directional beam at IEEE 802.11 WLAN(Wireless Local Area Network) band including 2.4㎓ and 5.8㎓ bands, respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.1
• /
• pp.62-68
• /
• 2014

Recently, MRI(magnetic resonance imager) scanner is continually used for medical diagnosis and many biomedical researches. When it operates, however, intense noise is generated. The SPL(sound pressure level) of the noise approaches 130 dB especially in 3 T(Tesla) MRI. Meanwhile, more than 3 T MRI scanners have been developed to get higher-resolution images, so louder noise is expected in the future. The intense noise makes patients feel nervous and uncomfortable. Moreover, it could possibly cause hearing loss to patient in extreme cases. For this reason, some active noise control systems have been researched. One of them used feedback Filtered-X LMS(FXLMS) algorithm which is able to control only narrowband noises and possible to diverge in severe case. In this paper, we determine the property of MRI noise. Using the property, we applied a method of open-loop and adaptive control for reducing MRI noise at target point inside bore. We verified performance of the method with computer simulation and preliminary experiment. The results demonstrate that the method can effectively reduce MRI noise at target point.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.912-920
• /
• 2008

OFDM (Orthogonal Frequency Division Multiplexing) system is robust to frequency selective fading and narrowband interference in high-speed data communications. However, an OFDM signal consists of a number of independently modulated subcarriers, which can give a large PAPR (Peak-to-Average Power Ratio) when added up coherently. In this paper, we apply clipping and filtering to solve the PAPR problem and compensate the inband compensation using calculated EVM (Error Vector Magnitude). The proposed method can reduce the PAPR and inband distortion. From the results, we analyze the PAPR reducing efficiency and EVM, BER performance of proposed algorithm in the wireless communication system.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.195-201
• /
• 2019

The Outgoing Longwave Radiation (OLR) is an important satellite-driven variable for understanding the Earth's energy budget balance. The geostationary OLR retrievals require angular and spectral integration using an empirical equation for irradiance flux-to-OLR from a regression analysis, which determines the accuracy of the narrowband satellite-based OLR. We selected homogeneous pixels which is satisfied less temporal-spatial variability of cloud, on three infrared channels (6.7, 10.8, $12.0{\mu}m$) of the first multipurpose geostationary satellite in Korea, namely the Communication, Ocean and Meteorological Satellite/Meteorological Imager (COMS/MI). Multiple regression analysis was performed to retrieve OLR with improved accuracy using selected parameters based on theoretical and physical significance. This algorithm yielded retrieval with higher accuracy than broadband-based OLR retrieval: RMSE of 10.54 to $3.81W\;m^{-2}$, and bias of -8.49 to $-0.07W\;m^{-2}$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.10-18
• /
• 2010

The polar transmitter is applied to the narrowband communication systems such as GSM (Global System for Mobile Communications), EDGE (Enhanced Data Rates for GSM Evolution), and GPRS (General Packet Radio Service). To apply polar transmitter for the wideband communication like OFDM (Orthogonal Frequency Division Multiplexing) where the high PAPR (Peak-to-Average Power Ratio) problem occurs, this paper proposes a windowed-sinc function based PAPR reduction scheme. The proposed algorithm mitigates the effect of excessive suppression due to successive peaks or relatively high peaks of the signal. The BER (Bit Error Rate) and EVM (Error Vector Magnitude) performances are measured for various window types and lengths. The simulation results demonstrate that the proposed algorithm achieves significant improvement in terms of BER and PAPR reduction performance with similar spectrum performance to the conventional peak windowing scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.11-19
• /
• 2014

In recent SONAR (sound navigation and ranging) systems, wideband active SONAR systems has received more attention than narrowband SONAR systems due to the remarkable detection performance in terms of range resolution. However, the wideband SONAR systems usually requires a huge amount of computational burden in order to achieve their own superiority. To cope with this drawback of the wideband SONAR systems, this paper proposes a fast target detection and velocity estimation method using an extended replica in wideband hyperbolic frequency modulation active SONAR system. Computer simulation shows that the proposed method can be implemented by a highly reduced computational complexity with a little performance degradation in target detection and velocity estimation compared to the conventional filter bank method.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.190-196
• /
• 2011

Bandwidth extension is a technique to improve speech quality and intelligibility, extending from 300-3400 Hz narrowband speech to 50-7000 Hz wideband speech. This paper designs an artificial bandwidth extension (ABE) module embedded in the AMR (adaptive multi-rate) decoder, reducing LPC/LSP analysis and algorithm delay of the ABE module. We also introduce a fast search codebook mapping method for ABE, and design a low power BWE technique based on the AMR decoder. The proposed ABE method reduces the computational complexity and the algorithm delay, respectively, by 28 % and 20 msec, compared to the traditional DTE (decode then extend) method. We also introduce a weighted classified codebook mapping method for constructing the spectral envelope of the wideband speech signal.