• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.409-414
• /
• 2007

The effect of multipath is especially serious in urban area and sea surface where buildings and water reflect GPS signal. Multipath brings about the performance degradation on many GPS application because the presence of multipath causes the diminution of pseudorange measurement accuracy in turn position accuracy. In this paper, a multipath mitigation named weighted correlation method is implemented on software GPS receiver, in which the asymmetric correlation function is compensated by modifying the late correlation value. Asymmetry compensation is obtained as weighted sum of two correlators which have different early-late chip spaces. This structure is adopted to lessen the computation load lower keeping up performance similar to that. The performance of implemented multipath mitigation technique is evaluated using GPS signal and multipath signal generated by GPS signal generator and software GPS receiver. The test results show that the weighted correlation method gives hefter performance than the standard correlator and the narrow correlator.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.565-572
• /
• 2006

Product Line Engineering (PLE) is an effective reuse methodology where common features among members are captured into core assets and applications are developed by reusing the core assets, reducing development cost while increasing productivity. To maximize benefits in developing systems, business case analysis for PLE is essential. If the scope for core assets is excessively broad, it will result in high cost of asset development while lowering reusability. On the other hand, if the scope is too narrow, it will result in a limited applicability which only support a small number of members in the domain. In this paper, we propose a process for business case analysis for PLE and for deciding economical analysis of core asset scope. Then, we define guidelines for each activity of the process. Since variability often occurs in PLE, we significantly treat the variability of features among members in detailed level. By applying our framework for business case analysis, one can develop core assets of which scope provide the most economical value with applying PLE.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.87-90
• /
• 1973

Optimum plot shape and size in a uniformity trial in the newly founded experimental farm of KAERI were determined for seed yield with the basic units consisted of 2.5m $\times$ 0.6m plot. Various plot sizes and shapes were made by combination of the basic units. Coefficients of variations for yield were 21% in local branch type variety Kumkang-Dairip and 20% in the introduced branchless type variety Clark. This result indicates that the field in the new experimental farm is appropriate for soybean yield trials when adequate number of replications are employed in the field experiment. In general, C. V. values were gradually decreased with increase of plot sizes. Although the data were not consistant, the errors for the long narrow plots tend to have somewhat smaller than for the square shape plots. A sharp decrease in C.V. value was found from the $4.5\textrm{m}^2$ plot in the variety Kumkang-Dairip and from the $6\textrm{m}^2$ plot in the variety Clark. These results imply that 5-$6\textrm{m}^2$ plot could be used for yield trials in early generations of hybrid progenies. 2.5-5m long plot with 3-4 replications will be practical for yield trials in the early hybrid generations. The C.V. values with 7.5m long plot was about 16% in both varieties and 15.3% in 10m plot. These results indicate that 7.5-10m plot with 3-4 replications could be employed in accurate yield test in the advanced generations.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.2
• /
• pp.128-136
• /
• 2015

Sky View Factor (SVF) is one of the urban morfometri parameters that impact on the Urban Heat Island (UHI). SVF analisys was conducted in the city of Jakarta to investigate the relationship between urban temperature with urban morfometri. Jakarta City is the most populous city in the world that has a surrounding area $66,152km^2$ and the total population around 23 million people. The population of the city is the sixth highest in the world today. SVF measurements done by taking pictures at the six stations that have different morphological characteristics namely (1) the narrow streets Apartment Cempaka Mas (JS ITC), (2) the width of the road Apartment Cempaka Mas (JL ITC), (3) in front of Colleges Kanisius (DKK), (4) in front of office Journalist of Indonesia (DKWI), (5) Utan Kayu (UK), and (6) Tambun (TB). SVF value is obtained from the photgraphic image. Taking pictures at the location using a Nikon D90 camera with a Nikon Fisheye Nikkor 10.5 mm 1 : 2.8 G ED, further processed through a global mapper program. Therefore, the SVF derived from the six stations that vary 0.21 to 0.78. Temperature measurement is done during daylight hours from 06:00 am to 18:00 pm during the Western Part of Indonesia (WIB). Measurements performed at three different times, namely working days (HK) regular holidays (HCB) national holidays (HCN). The results showed that the highest average temperature of $33.32^{\circ}C$, occurring at UK station (SVF=0.45) at the time of HCB. Meanwhile, the average low temperature of $31.22^{\circ}C$ occurred at JLITC station (SVF=0.42). The two-time occurred on ordinary holidays. Maximum temperature of $38.4^{\circ}C$ occurred in Utan Kayu station (SFV=0.45) that occurred at 11.00 hrs, normal holidays. Furthermore minimum temperature 24.5 occurred at Tambun station (SVF=0.78) at 06.00 hrs in the morning at the usual holidays and national holidays. In general, the results showed that areas with large SVF has a lower temperature compared with areas with smaller SVF. Though, are not the only factors that matter, but this research may show that an increase in temperature in the city of Jakarta. Therefore, it is necessary to mitigate the serious from the government or society.

• Radiation Oncology Journal
• /
• v.8 no.1
• /
• pp.115-124
• /
• 1990

The characteristics of 23 MV photon beam have been presented with respect to clinical parameters of central axis depth dose, tissue-maxi mum ratios, scatter-maximum ratios, surface dose and scatter correction factors. The nominal accelerating potential was found to be $18.5\pm0.5$ MV on the central axis. The half-value layer (HVL) of this photon beam was measured with narrow beam geometry from central axis, and it has been showed the thickness of $24.5\;g/cm^2$. The tissue-maximum ratio values have been determined from measured percentage depth dose data. In our experimental dosimetry, the surface dose of maximum showed only $9.6\%$ of maximum dose at $10\times10\;cm^2$, 100 cm SSD, without blocking tray in. The TMR'S of $0\times0$ field size have been determined to get average $2.3\%$ uncertainties from three different methodis; are zero effective attenuation coefficient, non-ilnear least square fit of TMR's data and effective linear attenuation coefficient from the HVL of 23 MV photon beams of dual energy linear accelerator.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.1
• /
• pp.15-19
• /
• 2005

Conventional eddy current testing has been used for the detection of the defect-like fatigue crack in the conductive materials, such as aluminum, which uses a sinusoidal signal with very narrow frequency bandwidth, Whereas, the pulsed eddy current method uses a pulse signal with a broad bandwidth. This can allow multi-frequency eddy current testing, and the penetration depth is greater than that of the conventional eddy current testing. In this work, a pulsed eddy current instrument was developed for evaluating the metal loss. The developed instrument was composed of the pulse generator generating the maximum square pulse voltage of 40V, an amplifier controlled up to 52dB, an A/D converter of 16 bit and the sampling frequency of 20 MHz, and an industrial personal computer operated by the Windows program. A pulsed eddy current probe was designed as a pancake type in which the sensing roil was located inside the driving roil. The output signals of the sensing roil increased rapidly wich the step pulse driving voltage かn off, and the latter part of the sensing coil output voltage decreased exponentially with time. The decrement value of the output signals increased as the thickness of the aluminum test piece increased.

• Sijohaknonchong
• /
• v.30
• /
• pp.9-20
• /
• 2009

The purpose of this study is to consider factors such as one's sight of viewing afar, expressional principles, and basic aesthetic category, which are treated importantly by the poets of the Joseon Dynasty era in appreciating nature. 'Afar' of the viewing afar is actual distance and aesthetic distance at the same time. Viewing afar is to find geographical features, depth, and details of a mountain, seeing the whole nature at a high place. Also, it can make possible escape from the external limitation of nature and get mental superiority and enhancement. Ultimately, viewing afar is to find out everlasting change of the nature and reason of natural creation. One's sight in viewing afar makes an appreciator's mind empty and calm, and it makes chance to harmonize human with nature. Viewing afar is to unite human nature to naturality beyond realistic value, idea, and artificiality. The mind from viewing afar has peacefulness and it is a state of serenity without any secular atmosphere. Viewing afar is an eye for beauty to leap toward an endless free state from narrow sight about objects. It rejects modification and technics in achieving an world of harmony. It means that objects should not be restrained by human's recognition. There are three expressions, which are high, horizontal, and transcendental viewing afar. The aesthetic category and beauty of peaceful mental state are realized by the expressions. The peaceful mental state makes peaceful mind from realistic conflicts and makes us experience a profound reason of nature.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.3
• /
• pp.53-61
• /
• 2016

Solar assisted heat pump system uses solar thermal energy as a heat source of evaporator of heat pump. So, COP can be enhanced as well as collector efficiency. For improving performance of this system, some research about hybrid solar collector that has fin-and-tube heat exchanger has been conducted. This collector can get a thermal energy from ambient air for liquid heating, so heated liquid can be used as a heat source of evaporator in heat pump even the solar radiation is not enough. In this study, numerical analysis was conducted for confirming heat gain of liquid according to fin height and pitch of fin-and-tube heat exchanger in collector. As a result, higher heat gain was obtained on lower fin height and narrow fin pitch, but the pressure drop also increased with increment of heat gain. Thus the JF factor considering both heat transfer enhancement and pressure drop was investigated and the maximum value was shown when the fin height and pitch were 40mm and 45mm. So it is considered that this installation condition has a highest heat transfer improvement when comparing with pressure drop. However heat gain of liquid at this condition was less than the other installation conditions of fin pitch on same height. Then, after establishing a proper minimum heat gain of liquid, actual production and experiment of collector will be conducted with fin height and pitch showing maximum JF factor and satisfying selected minimum heat gain of liquid on the basis of results of this study.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.342-347
• /
• 1995

Experiments were conducted to investigate the effects of storage temperature and blanching treatment on the storage stability in order to extend the shelf life of Citrus junos. Chilling injury of Citrus junos was not observed at the temperature range of $0^{\circ}C{\sim}5^{\circ}C$. Respiration rate of Citrus junos classified into climacteric characteristics as storage time goes by increase of respiration rate. The $Q_{10}$ value of Citrus junos during storage appeared to have a narrow range of $2.3{\sim}2.4$ The decaying rate increased drastically at $20^{\circ}C$ ranging from 71.4% to 86.5%. It was not much influenced by the pretreatments but by the storage temperature. There was no difference in weight loss between the control and blanching treatment. The weight loss of Citrus junos at $20^{\circ}C$ appeared to be high during the 12 weeks period, and consequently the overall quality of Citrus junos was rapidly decreased. The ratio of brix to acid showed a slow increase for Citrus junos stored at $3^{\circ}C.\;At\;20^{\circ}C$, however, it increased rapidly and then decreased. This phenomenon was mainly due to the relatively high increase of brix, compared to the increase in acid content. Development of browning color in Citrus junos was mainly associated with Citrus junos peel, rather than with Citrus junos pulp.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.1-7
• /
• 1985

Various types of shearing devices which may be a substitute for the conventional beams in stow nets were considered, and then tentatively named "the zonal canvas type of stow net" having the shearing device made of zonal canvas was devised. A 1/3 model of the net was made and experimented at sea. Converted to the full scale, the measured water resistance R(kg) of the net was given by $R=5.6{\times}10^{3}V^{l.5}$ or $R=3.5\frac{d}{l}{\lambda}_b{\lambda}_l\;V^{1.5}$, where V is the water velocity (m/sec), d the diameter of netting bars, l the length of the bars, ${\lambda}_b$ the stretched circumference of net mouth (m), ${\lambda}_l$ the length of net stretched. The net height kept about $83\%$ of the side rope length regardless of the variation of V and the net breadth kept a value over $90\%$ of the head rope length until V reached 1 m/sec. These results were very successful according to expectation, but the conventional netting was requested a further improvement. Therefore, the netting was newly designed to have smaller size of meshes in the vicinity of net mouth and larger hanging ratio breadthwise. With the netting a full scale net was made and experimented by a stern trawler. The experiment gave a net breadth over $95\%$ of the head rope length until V reached 1m/sec and showed no faults in the net. But the net operation by the stern trawler was ascribed an inconvenience to its narrow breadth of stern slip way.