• 제목/요약/키워드: Nanofiltration

검색결과 208건 처리시간 0.019초

이온 몰 전도도가 나노여과막에 의한 폐수 중의 중금속 분리특성에 미치는 영향 (Effect of Ionic Molar Conductivity on Separation Characteristics of Heavy Metals by Nanofiltration Membranes in Waste Water)

  • 오정익
    • 토지주택연구
    • /
    • 제4권1호
    • /
    • pp.119-124
    • /
    • 2013
  • 나노여과막은 일반적으로 하전막이며, 용질의 하전성, 막과의 상호작용에 의해서 특징 있는 분리특성을 보인다. 본 연구에서는 나노여과막에 의한 폐수 중의 중금속류의 제거에 미치는 하전특성을 조사했다. 크롬(Cr), 철(Fe), 구리(Cu), 아연(Zn), 비소(As), 주석(Sn), 납(Pb)을 각각 0.1mg/L 첨가한 모의폐수를 제조하여 나노여과막(a)와 나노여과막(b)를 이용하여 운전압력 0.24MPa, 온도 $25^{\circ}C$에서 여과실험을 수행하였다. 그 결과, 나노여과막(a)와 나노여과막(b)에 의한 염소 이온의 제거율은 12.8%, 3.5%였고, 황산이온의 제거율은 78%, 9.3%였고 TOC의 제거율은 70.4%, 26.2%이었다. 한편, 중금속의 제거율은 나노여과막(a)의 경우 크롬(Cr) 92.5%, 철(Fe) 90.9%, 구리(Cu) 93.1%, 아연(Zn) 92.6%, 비소(As) 74.6%, 주석(Sn) 97.3%, 납(Pb) 93.4%이었고, 나노여과막(b)의 경우는 크롬(Cr) 69.9%, 철(Fe) 84.6%, 구리(Cu) 87.0%, 아연(Zn) 73.3%, 비소(As) 15.2%, 주석(Sn) 80.1%, 납(Pb) 87.7%이었다. 여기서, 나노여과(a), 나노여과(b)의 경우 공통적으로 크롬, 철, 동, 아연, 주석, 납에 비하여 비소의 제거율은 상대적 낮았다. 상기 실험결과에서 폐수 중에 다량 함유되는 염소이온 및 황산이온에 대한 중금속류의 분리계수와 이온성분의 수중에서의 활동정도를 나타내는 인자인 이온 몰 전도도로 해석할 수 있었다. 그 결과, 몰 전도도 비가 큰 중금속 이온일수록, 나노여과막에 의한 중금속 이온의 제거율이 높아지는 경향을 알 수 있었다.

Recovery of Lactic Acid from Fermentation Broth by the Two-Stage Process of Nanofiltration and Water-Splitting Electrodialysis

  • Lee, Eun-Gyo;Kang, Sang-Hyeon;Kim, Hyun-Han;Chang, Yong-Keun
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제11권4호
    • /
    • pp.313-318
    • /
    • 2006
  • A two-stage process of nanofiltration and water-splitting electrodialysis was investigated for lactic acid recovery from fermentation broth. In this process, sodium lactate is isolated from fermentation broth in the first stage of nanofiltration by using an NTR-729HF membrane, and then is converted to lactic acid in the second stage by water-splitting electrodialysis. To determine the optimal operating conditions for nanofiltration, the effects of pressure, lactate concentration, pH, and known added impurities were studied. Lactate rejection was less than 5%, magnesium rejection approximated 45%, and calcium rejection was at 40%. In subsequent water-splitting electrodialysis, both the sodium lactate conversion to lactic acid and sodium hydroxide recovery, were about 95%, with a power requirement of $0.9{\sim}1.0\; kWh$ per kg of lactate.

Concentration of 6-Amonopenicillanic Acid from Penicillin Bioconversion Solution and Its Mother Liquor by Nanofiltration Membrane

  • Xuejun Cao;Wu, Xing-Yan;Tong Wu;Keming Jin;Hur, Byung-Ki
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제6권3호
    • /
    • pp.200-204
    • /
    • 2001
  • In this study, nanofiltration was applied to the concentration of the 6-aminopenicillinic acid (6-APA) from bioconverted penicillin solution and also to its mother liquor. The 6-APA in the solution was concentrated from 0.211 mol/L to 0.746 mol/L by nanofiltration. The final maximum concentration was 3.6 times higher than the initial concentration an the recovery yield was 97% to 99% of the original 6-APA. The concentrated solution was crystallized with the yields of 88.9-90.2% and the purity of the crystallized product was about 98%. The concentration of 6-APA in the mother liquor after crystallization was 0.014 mol/L and thus was concentrated 20-30 fold by nanofiltration and crystallization. The recovery of 6-APA was over 98%. The salts contained in the mother liquor, such as NH$_4$Cl and KCl, could be removed by allowing them to permeate through the membrane.

  • PDF

Hybrid salts precipitation-nanofiltration pretreatment of MSF and RO seawater desalination feed

  • Al-Rawajfeh, Aiman Eid
    • Membrane and Water Treatment
    • /
    • 제3권4호
    • /
    • pp.253-266
    • /
    • 2012
  • In this work, the effect of hybrid salts precipitation-nanofiltration (SP-NF) process on the scale deposits in thermal and membrane desalination processes has been studied. The analysis was carried out to study the scale formation from the Arabian Gulf seawater in MSF and RO reference processes by changing the percentage of pretreatment from 0 to 100%. Four different SP-NF configurations were suggested. A targeted Top Brine Temperature (TBT) of $130^{\circ}C$ may be achieved if 30% portion is pretreated by SP and/or NF processes. As a rule of thumb, each 1% pretreatment portion increases the reference TBT of $115^{\circ}C$ by $0.6^{\circ}C$. For both MSF and RO, parallel pretreatment of certain percentage of the feed by SP and the rest by NF, showed the lowest scale values. The case showed the best values for sulfate scale prevention and the highest values of increasing the monovalent ions relative to the divalent scale forming ions. Sulfate scale is significant in MSF process while carbonate scale is significant in RO. Salt precipitation was suggested because it is less costly than nanofiltration, but nanofiltration was used here because it is efficient in sulfate ions removal.

상용 유기용매 나노여과막 성능분석 및 비교 (Comparison of Commercial Organic Solvent Nanofiltration (OSN) Membrane Performance)

  • 김수민;송건탁;김정
    • 멤브레인
    • /
    • 제31권4호
    • /
    • pp.282-292
    • /
    • 2021
  • 본 연구에서는 Dead-end와 Crossflow 시스템을 사용하여 유기용매 나노여과(Organic Solvent Nanofiltration, OSN) 상용분리막의 성능을 분석하였다. 가교된 polyimide 소재 기반의 Duramem (DM) OSN 분리막의 성능을 ethanol, dimethylformamide (DMF), acetone, acetonitrile 용매에서의 성능을 분석하였다. 네 종류의 분획분자량 성능을 갖는 DM 분리막의 성능을 평가하였을 때 dead-end보다 Crossflow에서 조금 더 정확하고 신뢰성 높은 결과를 얻을 수 있었으며, 동일한 분리막이더라도 용매의 특성에 따라 투과도와 선택도 차이가 크게 난다는 것을 확인할 수 있었다. 이는 압밀화현상으로 인한 초기 안정화 기간의 차이 때문인 것으로 판단되며 분리막마다 안정화기간이 다르므로 신뢰성 높은 결과를 얻기 위해선 Crossflow 시스템을 활용하는 것이 더 적합한 것으로 보인다.

Nanofiltration of Dye Solutions Through Polyamide Composite Membranes

  • Jonggeon Jegal;Baek, Kyung-Sook;Lee, Kew-Ho
    • Korean Membrane Journal
    • /
    • 제4권1호
    • /
    • pp.12-19
    • /
    • 2002
  • Nanofiltration of aqueous dye solutions was carried out using polyamide (PA) nanofiltration (NF) composite membranes. The PA composite membranes were prepared by the interfacial polymerization of piperazine (PIP) and trimesoyl chloride (TMC) on the surface of microporous polysulfone (PSf) ultrafi1tration (UF) membranes. After characterization in terms of their permeation performance and surface ionic property, they were used for the separation of dye solutions such as Direct Red 75, 80, 81, and Direct Yellow 8 and 27. The separation conditions were varied to study the factors affecting on the permeation performance of the membranes: different concentrations of dye solutions, operating temperature and time, and flow rate of a feed solution. The surface property of the membrane, especially its ionic property, as a function of operating time was examined with a zeta-potentiometer and the relationship between the surface chemistry of the membrane and its permeation properties was also studied.

Nanofiltration linear and helical module들의 막투과 성능 비교 (A Study ob Performance with NanofiltrationLinear and Helical Modules)

  • 이광현
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1997년도 추계 총회 및 학술발표회
    • /
    • pp.33-36
    • /
    • 1997
  • 1. 서론 : 압력-구동 막공정을 분리공정에 응용시 커다란 장해는 막표변과 내부에 용존 및 부유물질들의 성장과 침착현상이다. 지난 수년 동안에 여러 연구자들이 유체의 불안정성을 이용하여 농도분극과 오염현상을 효과적으로 제거할 수 있음을 보였다.(생략)

  • PDF

Arsenic removal from Water by Nanofiltration Membrane

  • Nguyen, Cuong Manh;Bang, Sun-Baek;Cho, Jae-Weon;Kim, Kyoung-Woong
    • 대한자원환경지질학회:학술대회논문집
    • /
    • 대한자원환경지질학회 2007년도 춘계 지질과학기술 공동학술대회
    • /
    • pp.58-61
    • /
    • 2007
  • See Full Text

  • PDF

Preparation of Poly(vinylidene fluoride)-g-poly(methacrylic acid) Composite Nanofiltration Membrane

  • Kim, Yong-Woo;Choi, Jin-Kyu;Koh, Joo-Hwan;Kim, Jong-Hak
    • Korean Membrane Journal
    • /
    • 제9권1호
    • /
    • pp.57-63
    • /
    • 2007
  • Amphiphilic graft copolymer from poly(vinylidene fluoride) (PVDF) was synthesized using atom transfer radical polymerization (ATRP) for composite nanofiltration membranes. Direct initiation of the secondary fluorinated site of PVDF facilitates grafting of tert-butyl methacrylate (tBMA). Amphiphilic PVDF-g-PMAA graft copolymer with a 51:49 wt ratio was obtained by hydrolyzing poly(tert-butyl methacrylate) (PtBMA) to poly(methacrylic acid) (PMAA). Wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC) confirmed the decrease of crystallinity of PVDF upon graft copolymerization. Composite nanofiltration membranes were prepared from PVDF-g-PMAA as a top layer coated onto PVDF ultrafiltration (UF) support membrane. The morphology and hydrophilicity of membranes were characterized using scanning electron microscopy (SEM) and contact angle measurement. The rejections of composite membranes were 80.2% for $Na_2SO_4$ and 28.4% for NaCl, and the solution flux were 9.5 and $14.5\;L/m^2\;h$ at 1.0 MPa pressure.