• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2671-2676
• /
• 2011

Nanocrystalline $TiO_2$ spherical particle (NP) with a dimension of 5 ${\times}$ 5.5 nm and several nanorods (NR) with different aspect ratios (diameter ${\times}$ length: 5 ${\times}$ 8.5, 4 ${\times}$ 15, 4 ${\times}$ 18 and 3.5 ${\times}$ 22 nm) were selectively synthesized by a solvothermal process combined with non-hydrolytic sol-gel reaction. With varying the molar ratio of TTIP to oleic acid from 1:1 to 1:16, the NRs in the pure anatase phase were elongated to the c-axis direction. The prepared NP and NRs were applied for the formation of nanoporous $TiO_2$ layers in dye-sensitized solar cell (DSSC). Among them, NR2 ($TiO_2$ nanorod with 4 ${\times}$ 15 nm) exhibited the highest cell performance: Its photovoltaic conversion efficiency (${\eta}$) of 6.07%, with $J_{sc}$ of 13.473 mA/$cm^2$, $V_{oc}$ of 0.640 V, and FF of 70.32%, was 1.44 times that of NP with a size of 5 ${\times}$ 5.5 nm. It was observed from the transient photoelectron spectroscopy and the incident photon to current conversion efficiency (IPCE) spectra that the $TiO_2$ films derived from NR2 demonstrate the longest electron diffusion length ($L_e$) and the highest external quantum efficiency (EQE).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.441-441
• /
• 2009

Dye-sensitized solar cells (DSSCs) have been widely investigated as a next-generation solar cell because of their simple fabrication process and low coats. The cells use a porous nanocrystalline TiO2 matrix coated with a sensitizer dye that acts as the light-harvesting element. The photo-exited dye injects electrons into the $TiO_2$ particles, and the oxide dye reacts with I- in the electrolyte in regenerative cycle that is completed by the reduction of $I_3^-$ at a platinum-coated counter electrode. Since $TiO_2$ porous film plays a key role in the enhancement of photoelectric conversion efficiency of DSSC, many scientists focus their researches on it. Especially, a high light-to-electricity conversion efficiency results from particle size and crystallographic phase, film porosity, surface structure, charge and surface area to volume ratio of porous $TiO_2$ electrodes, on which the dye can be sufficiently adsorbed. Effective treatment of the photoanode is important to improve DSSC performance. In this paper, to obtain properties of surface and dispersion as nitric acid treated $TiO_2$ photoelectrode was investigate. The photovoltaic characteristics of DSSCs based the electrode fabricated by nitric acid pre-treatment $TiO_2$ materials gave better performances on both of short circuit current density and open circuit voltage. We compare dispersion of $TiO_2$ nanoparticles before and after nitric acid treatment and measured Ti oxidized state from XPS. Low charge transfer resistance was obtained in nitric acid treated sample than that of untreated sample. The dye-sensitized solar cell based on the nitric acid treatment had open-circuit voltage of 0.71 V, a short-circuit current of 15.2 mAcm-2 and an energy conversion efficiency of 6.6 % under light intensity of $100\;mWcm^{-2}$. About 14 % increases in efficiency obtained when the $TiO_2$ electrode was treated by nitric acid.

• 한국재료학회지
• /
• 제9권10호
• /
• pp.956-961
• /
• 1999

초미립 $BaTiO_3$분말을 출발물질로 하고 $\textrm{La}_{3+}$을 0~2 mol% 첨가하여 $1200~1400^{\circ}C$에서 소결하였을 때 $\textrm{La}_{3+}$을 첨가하지 않고 $1350^{\circ}C$ 이상에서 소결한 경우를 제외하고는 모두 110~240 nm의 평균입경을 갖는 초미립의 $\textrm{La}_{3+}$-doped $BaTiO_3$소결체를 얻을 수 있었다. 이 때, 평균입경이 240 nm에서 110 nm로 감소함에 따라 정방정비 (c/a), $90^{\circ}$ 분역의 부피분율, 상온 비유전율, 상전이온도($\textrm{T}_{c}$)에서의 최대 비유전율, $\textrm{T}_{c}$ 에서의 상전이 완만화도 등은 모두 감소하였다. 이와 같은 유전특성의 입경 의존성은 평균입경 감소에 따른 $90^{\circ}$ 분역 생성의 억제 및 그에 따른 내부응력의 영향으로 해석하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.3011-3015
• /
• 2009

Structural and thermo-analytical studies were carried out to understand the phase formation kinetics of the single phase $Bi_5Ti_3FeO_{15}$ (BTFO) nanocrystals in $Bi_2O_3-Fe_2O_3-TiO_2$, during the polymerized complex (PC) synthesis method. The crystallization of Aurivillius phase $Bi_5Ti_3FeO_{15}$ layered perovskite was found to be initiated and achieved under the temperature conditions in the range of ${\sim}$800 to 1050$^{\circ}C$. The activation energy for grain growth of $Bi_5Ti_3FeO_{15}$ nanocrystals (NCs) was very low in case of NCs formed by PC (2.61 kJ/mol) than that formed by the solid state reaction (SSR) method (10.9 kJ/mol). The energy involved in the phase transformation of Aurivillius phase $Bi_5Ti_3FeO_{15}$ from $Bi_2O_3-Fe_2O_3-TiO_2$ system was ${\sim}$ 69.8 kJ/mol. The formation kinetics study of $Bi_5Ti_3FeO_{15}$ synthesized by SSR and PC methods would not only render a large impact in the nanocrystalline material development but also in achieving highly efficient visible photocatalysts.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.469-472
• /
• 2012

Intensity modulated photocurrent spectroscopy and intensity modulated photovoltage spectroscopy were investigated to measure the dynamic response of charge transfer and recombination in the standard, $TiCl_4$-treated and the combined scattering layer electrode dye-sensitized solar cells (DSSCs). IMPS and IMVS provided transit time ($\tau_n$), lifetime ($\tau_r$), diffusion coefficient ($D_n$) and effective diffusion length ($L_n$). These expressions are derived that generation, collection, and recombination of electrons in a thin layer nanocrystalline DSSC under conditions of steady illumination and with a superimposed small amplitude modulation. In this experimental, IMPS/IMVS showed that the main effect of $TiCl_4$ treatment is to suppress the recombination of photogenerated electrons, thereby extending their lifetime. And the Diffusion coefficient of combined scattering layer electrode is $6.10{\times}10^{-6}$ higher than that of the others, resulting in longer diffusion length.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.310-315
• /
• 2012

Nano-powders of 1.5TiAl and $Al_2O_3$ were synthesized from $1.5TiO_2$ and 3Al powders by high energy ball milling. Nanocrystalline $Al_2O_3$ reinforced composite was consolidated by pulsed current activated sintering within 2 minutes from mechanochemically synthesized powders of $Al_2O_3$ and 1.5TiAl. The relative density of the composite was 99.5%. The average hardness and fracture toughness values obtained were $1250kg/mm^2$ and $10MPa{\cdot}m^{1/2}$, respectively.

• 전기화학회지
• /
• 제2권4호
• /
• pp.232-236
• /
• 1999

염료감응 태양전지의 전극 물질로 금속산화물인 이산화티타늄$(TiO_2)$를 사용하고, 감응제로 malachite green oxalate, basic blue3, rhodamine B, bromocresol purple 염료를 사용할 때 광전환 효율을 높이고 안정성을 향상시키기 위하여 갖추어야될 염료의 전기화학적 특성과 분광학적 특성을 조사하였다. 기준전극에 대한 염료의 산화전위와 흡수파장을 전자볼트 단위로 환산한 값을 더하여 들뜬 상태를 얻었다. $TiO_2$전극의 평활전위$(E_{fb})$를 결정하여 전도띠 끝 준위$(E_{c,s})$를 계산하였으며, 이를 염료의 들뜬 상태와 비교함으로써 합선 전류$(J_{sc})$를 향상시킬 수 있도록 염료가 갖추어야 할 특성을 알아내었다. 또한 폴리피롤 전도성 고분자를 입혀 $TiO_2$의 결함자리에서 전도띠에 있는 전자가 산화된 염료와 재결합하는 것과 $TiO_2$필름의 균열에 의한 염료의 전극반응을 방지함으로써 광전류의 안정성을 향상시킨 결과를 얻었다.

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.891-896
• /
• 2012

Nanopowders of MgO and $TiO_2$ were made by high energy ball milling. The rapid synthesis and sintering of the nanostructured $MgTiO_3$ compound was investigated by the high-frequency induction heated sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. A highly dense nanostructured $MgTiO_3$ compound was produced with simultaneous application of 80 MPa pressure and induced current within 2 min. The sintering behavior, gain size and mechanical properties of $MgTiO_3$ compound were investigated.

• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.567-573
• /
• 1997

Photoinduced electron transfer from the charge-transfer excited states of Ru(tpy)(bpy(COOH)₂)$CN^+$, Ru(tpy)(bpy(COOH)₂)$Cl^+$, Ru(tpy)(bpy(COOH)₂)H₂+O², and Ru(tpy)(bqu(COOH)₂)$Cl^+$ to the conduction band of TiO₂ has been studied through photoelectrochemical methods. Ru(tpy)(bpy(COOH)₂)$CN^+$ produced the highest current density and open-circuit photovoltage, whereas Ru(tpy)(bqy(COOH)₂)$Cl^+$ produced the lowest values. A potential barrier was employed to explain the experimental result that the rate of the electron transfer increases with increasing the energy difference between the donor and acceptor. A sensitizer with a high current density yielded a high photovoltage and a high conversion efficiency. The reduction rate of the oxidized sensitizer decreased with the increases in the reduction potential of the sensitizer, resulting in a poor stability of a photoelectrochemical cell.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.172-176
• /
• 2009

The nature and morphology of titanium dioxide films play a significant role in determining the overall efficiency of dye-sensitized solar cell (DSSCs). In this work, the preparation of nanostructured titania particles by sol-gel method (SG-$TiO_2$) and its characterization were investigated for the application of DSSCs. The samples were characterized by XRD, XPS, FE-SEM, BET and FT-IR analysis. The energy conversion efficiency of SG-$TiO_2$ was approximately 8.3 % under illumination with AM 1.5 (100 mW/$cm^2$) simulated sunlight. DSSCs made of SG-$TiO_2$ nanocrystalline films as photoanodes achieved better energy conversion efficiency compared to those prepared using commercially available Degussa P25.