• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.433-440
• /
• 2002

Synthesis and compaction of Al-base nano powders by pulsed discharge method were investigated. The aluminum based powders with 50 to 200 nm of diameter were produced by pulsed wire evaporation method. The powders were covered with very thin oxide layer. The perspective process for the compaction and sintering of nanostructured metal-based materials stable in a wide temperature range can be seen in the densification of nano-sized metal powders with uniformly distributed hard ceramic particles. The promising approach lies in utilization of natural uniform mixtures of metal and ceramic phases, e.g. partially oxidized metal powders as fabricated in our synthesis method. Their particles consist of metal grains coated with oxide films. To construct a metal-matrix material from such powder, it is necessary to destroy the hard oxide coatings of particles during the compaction process. This goal was realized in our experiments with intensive magnetic pulsed compaction of aluminum nanopowders passivated in air.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.317.2-317.2
• /
• 2013

Ultrathin oxide encapsulated metal-oxide hybrid nanocatalysts have been fabricated by a soft chemical and facile route. First, SiO2 nanoparticles of 25~30 nm size have been synthesized by modified Stobber's method followed by amine functionalization. Metal nanoparticles (Ru, Rh, Pt) capped with polymer/citrate have been deposited on functionalized SiO2 and finally an ultrathin layer of TiO2 coated on surface which prevents sintering and provides high thermal stability while maximizing the metal-oxide interface for higher catalytic activity. TEM studies confirmed that 2.5 nm sized metal nanoparticles are well dispersed and distributed throughout the surface of 25 nm SiO2 nanoparticles with a 3-4 nm TiO2 ultrathin layer. The metal nanoparticles are still well exposed to outer surface, being enabled for surface characterization and catalytic activity. Even after calcination at $600^{\circ}C$, the structure and morphology of hybrid nanocatalysts remain intact confirm the high thermal stability. XPS spectra of hybrid nanocatalyst suggest the metallic states as well as their corresponding oxide states. The catalytic activity has been evaluated for high temperature CO oxidation reaction as well as photocatalytic H2 generation under solar simulation. The design of hybrid structure, high thermal stability, and better exposure of metal active sites are the key parameters for the high catalytic activity. The maximization of metal-TiO2 interface interaction has the great role in photocatalytic H2 production.

• 한국재료학회지
• /
• 제24권10호
• /
• pp.532-537
• /
• 2014

In this study, highly sensitive hydrogen micro gas sensors of the multi-layer and micro-heater type were designed and fabricated using the micro electro mechanical system (MEMS) process and palladium catalytic metal. The dimensions of the fabricated hydrogen gas sensor were about $5mm{\times}4mm$ and the sensing layer of palladium metal was deposited in the middle of the device. The sensing palladium films were modified to be nano-honeycomb and nano-hemisphere structures using an anodic aluminum oxide (AAO) template and nano-sized polystyrene beads, respectively. The sensitivities (Rs), which are the ratio of the relative resistance were significantly improved and reached levels of 0.783% and 1.045 % with 2,000 ppm H2 at $70^{\circ}C$ for nano-honeycomb and nano-hemisphere structured Pd films, respectively, on the other hand, the sensitivity was 0.638% for the plain Pd thin film. The improvement of sensitivities for the nano-honeycomb and nano-hemisphere structured Pd films with respect to the plain Pd-thin film was thought to be due to the nanoporous surface topographies of AAO and nano-sized polystyrene beads.

• 대한환경공학회지
• /
• 제31권12호
• /
• pp.1069-1074
• /
• 2009

본 연구에서는 CuO와 ZnO의 입자 크기가 옥수수의 성장과 토양 미생물 군집에 미치는 독성을 microcosm 실험을 통하여 살펴보았다. 나노 입자는 micro 입자에 비해 옥수수의 biomass를 약 30% 감소시켜 나노 입자가 옥수수의 성장을 저해하는 것으로 나타났다. 토양 미생물 활성 지표인 Dehydrogenase activity는 CuO 나노 입자에서는 낮게 나타났으나 ZnO 나노 입자에서는 높게 나타났다. Biolog test 결과, CuO 나노 입자와 ZnO micro 입자에서 토양 미생물 다양성이 감소하는 것으로 나타났다. 그러므로, metal oxide의 나노 입자가 micro 입자보다 항상 토양 미생물의 활성 및 다양성에 더 유해한 영향을 나타내는 것은 아니라고 판단된다.

• 세라미스트
• /
• 제21권2호
• /
• pp.49-58
• /
• 2018

Metal oxide based materials have been widely used to fields of electrochemical applications. Recently, various type of defects from microstructures of metal oxides and their nanocomposites have been raised as the important material design factors for realizing highly improved electrochemical properties. Previous experimental and theoretical works have suggested that controlling the reaction activity and kinetics of the key electrochemical reactions by activated interfaces originating from the defect sites can play an important role in achieving the robust energy storage and conversion. Therefore, this paper focuses on the role of defect-controlled metal oxide materials such as doping, edge-sites, grain boundaries and nano-sized pores for the high performances in energy storage devices and electrocatalysts. The research approaches demonstrated here could offer a possible route to obtain noble ideas for designing the metal oxide materials for the energy storage and conversion applications.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1222-1227
• /
• 2014

기록물들은 정보전달을 위한 수단일 뿐만 아니라, 역사적 문화적으로 매우 중요한 가치를 지니고 있어 각각의 기록매체에 적합한 보존대책을 수립하고 적용해야만 한다. 특히 종이기록물은 시간이 지나면 생물손상 및 화학적인 반응에 의해 열화가 진행되며, 안전한 보존을 위해서 탈산 및 살균기능 처리를 필요로 한다. 본 연구에서는 종이기록물의 효과적인 보존처리를 위하여 15~30nm 크기의 나노산화아연(ZnO)과 나노산화마그네슘(MgO)을 합성하였다. 합성한 나노화합물들을 종이기록물에 적용한 결과, 탈산효과와 항균효과가 우수한 것으로 나타났다. 또한, 합성된 나노화합물들은 구성성분이 100%(Pb, Cd, As 비검출)에 가까워 종이기록물에 탈산처리한 후 중금속으로 인하여 발생할 수 있는 기록물의 훼손이 없을 것으로 판단된다.

• 한국재료학회지
• /
• 제20권10호
• /
• pp.508-512
• /
• 2010

The optimum route to fabricate nano-sized Fe-50 wt% Co and hydrogen-reduction behavior of calcined Fe-/Conitrate was investigated. The powder mixture of metal oxides was prepared by solution mixing and calcination of Fe-/Co-nitrate. A DTA-TG and microstructural analysis revealed that the nitrates mixture by the calcination at $300^{\circ}C$ for 2 h was changed to Fe-oxide/$Co_3O_4$ composite powders with an average particle size of 100 nm. The reduction behavior of the calcined powders was analyzed by DTA-TG in a hydrogen atmosphere. The composite powders of Fe-oxide and Co3O4 changed to a Fe-Co phase with an average particle size of 40 nm in the temperature range of $260-420^{\circ}C$. In the TG analysis, a two-step reduction process relating to the presence of Fe3O4 and a CoO phase as the intermediate phase was observed. The hydrogen-reduction kinetics of the Fe-oxide/Co3O4 composite powders was evaluated by the amount of peak shift with heating rates in TG. The activation energies for the reduction, estimated by the slope of the Kissinger plot, were 96 kJ/mol in the peak temperature range of $231-297^{\circ}C$ and 83 kJ/mol of $290-390^{\circ}C$, respectively. The reported activation energy of 70.4-94.4 kJ/mol for the reduction of Fe- and Co-oxides is in reasonable agreement with the measured value in this study.

• Toxicological Research
• /
• 제33권3호
• /
• pp.239-253
• /
• 2017

Neodymium is a future-oriented material due to its unique properties, and its use is increasing in various industrial fields worldwide. However, the toxicity caused by repeated exposure to this metal has not been studied in detail thus far. The present study was carried out to investigate the potential inhalation toxicity of nano-sized neodymium oxide ($Nd_2O_3$) following a 28-day repeated inhalation exposure in male Sprague-Dawley rats. Male rats were exposed to nano-sized $Nd_2O_3-containing$ aerosols via a nose-only inhalation system at doses of $0mg/m^3$, $0.5mg/m^3$, $2.5mg/m^3$, and $10mg/m^3$ for 6 hr/day, 5 days/week over a 28-day period, followed by a 28-day recovery period. During the experimental period, clinical signs, body weight, hematologic parameters, serum biochemical parameters, necropsy findings, organ weight, and histopathological findings were examined; neodymium distribution in the major organs and blood, bronchoalveolar lavage fluid (BALF), and oxidative stress in lung tissues were analyzed. Most of the neodymium was found to be deposited in lung tissues, showing a dose-dependent relationship. Infiltration of inflammatory cells and pulmonary alveolar proteinosis (PAP) were the main observations of lung histopathology. Infiltration of inflammatory cells was observed in the $2.5mg/m^3$ and higher dose treatment groups. PAP was observed in all treatment groups accompanied by an increase in lung weight, but was observed to a lesser extent in the $0.5mg/m^3$ treatment group. In BALF analysis, total cell counts, including macrophages and neutrophils, lactate dehydrogenase, albumin, interleukin-6, and tumor necrosis factor-alpha, increased significantly in all treatment groups. After a 4-week recovery period, these changes were generally reversed in the $0.5mg/m^3$ group, but were exacerbated in the $10mg/m^3$ group. The lowest-observed-adverse-effect concentration of nano-sized $Nd_2O_3$ was determined to be $0.5mg/m^3$, and the target organ was determined to be the lung, under the present experimental conditions in male rats.

• 자원리싸이클링
• /
• 제17권6호
• /
• pp.79-88
• /
• 2008

본 연구는 폐 주석의 리싸이클링을 통한 고기능성 주석 산화물 나노 분말의 대량제조 기술개발을 위한 전 단계 연구로서 주석 염화물 용액을 원료로 하여 분무열분해 반응에 의하여 평균입도 50nm 이하의 주석 산화물 분말을 제조하였으며 반응온도의 변화에 따른 생성 입자들의 특성 변화를 파악하였다. 열분해 반응온도가 $800^{\circ}C$로부터 $850^{\circ}C$로 증가함에 따라 형성된 입자들의 평균입도는 20 nm로부터 30 nm로 증가하였다. 또한 XRD 피크의 강도도 증가하였으며 비표면적은 1/2 정도로 크게 감소하였다. 반응온도 $900^{\circ}C$의 경우에는 액적 형태는 평균입도 30 nm 정도의 나노 입자들로 구성되어 있는 반면 독립된 입자들의 경우에는 평균입도가 $80{\sim}100\;nm$로 현저하게 증가 하였으며 입자 표면이 더욱 치밀화되어 있었다. 또한 XRD 피크 강도도 현저히 증가하였으며 비표면적은 현저하게 감소하였다. 반응온도 $950^{\circ}C$의 경우에는 액적 형태의 비율 및 크기가 현저히 감소하였으며 대부분의 입자들은 독립된 형태를 유지하고 있었으며 평균입도는 약 70 nm로 $900^{\circ}C$의 경우보다 오히려 감소하였다. 또한 XRD 피크의 강도도 $900^{\circ}C$의 경우에 비하여 현저히 감소하였으며 비표면적은 2배 정도 크게 증가하였다.

• 산업기술연구
• /
• 제43권1호
• /
• pp.1-6
• /
• 2023

TiO₂ is a versatile metal oxide material that is frequently used as a photo-catalyst for organic pollutant oxidation and a functional material for ultraviolet-ray protection. To improve its chemical/physical properties and widen the range of industrial application, it is demanded to control the crystalline feature and morphology precisely by applying advanced nano-synthesis methods. In this study, we prepared TiO₂ nanoparticles using the water-in-oil (W/O) microemulsion method and compared them with the particles synthesized by the conventional precipitation method. Also, we tried to find the optimum conditions for obtaining nano-sized, anatase-rich TiO₂ particles by the W/O microemulsion method. We analyzed the crystalline feature and particle size of the prepared samples using X-ray diffraction (XRD) and Transmission electron microscopy (TEM). In summary, we found the W/O microemulsion is more effective than precipitation in obtaining nano-sized TiO₂. The best result was derived when the microemulsion was formed using AOT surfactant, hydrolysis was performed under basic condition and the sample was calcined at 200℃.