• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.278-278
• /
• 2013

최근 나노 입자의 안전성에 대한 연구가 활발하게 이루어 지고 있다. 대부분의 연구는 세포독성과 쥐에 흡입시켜 각 장기에 침착 정도를 측정하는 연구에 집중되어 있고, 나노입자의 리간드 특성에 대한 연구는 활발이 진행되고 있지 않다. 따라서 같은 나노입자를 이용한 연구결과가 다르게 나타나는 것을 종종 확인 할 수 있어서, 나노입자 특성평가의 중요성이 커지고 있다 [1,2]. 본 연구에서는 용매에 리간드가 존재하는 PEG-conjugated AuNPs과 원심분리로 용액내의 free-ligands가 제거된 PEG-conjugated AuNPs에 대하여 ToF-SIMS 이미지를 얻었고, PEG와 AuNPs 이미지의 statistical correlation으로부터 AuNPs의 표면에 존재하는 리간드들의 stability를 평가할 수 있는 방법을 개발하였다. 또한, citrated-conjugated AuNPs을 PEG 리간드로 표면을 치완시키고, phagolysosomal simulant Fulid(PSF) 용액에 incubation 과정 동안의 PEG 리간드가 표면에서 제거되어 용액에 존재함을 확인하였다. ToF-SIMS의 이미지와 statistical correlation을 이용하면 나노입자의 표면에 존재하는 다양한 리간드들의 안정성을 평가할 수 있고, 이를 통한 나노입자의 안전성에 대한 연구에 기여 할 수 있을 것으로 기대된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.02a
• /
• pp.183-183
• /
• 2003

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1589-1595
• /
• 2000

레이저 텍스쳐와 미케니칼 텍스쳐 컴퓨터 하드디스크의 마찰과 마코 매카니즘이 Contact Start/Stop test 실행후의 특성들에 대해 연구되었다. 다양한 분석적이고 기계적인 테스트 기술들이 이용되었다. 형상, 조도, 화학적 조성, 기계적 성질, CSS 로부터 기인된 코팅의 마찰특성들에 대해 그 변화들을 조사하였다. 즉, AFM(Atomic Force Microscopy), Nano-Indentation, Nano-Scratch, TOF-SIMS(Time of Flight Secondary Ion Mass Spectroscopy), AES(Auger Electronic Spectroscopy)등이 이 연구에 적용되었다. 레이저 텍스쳐 범프의 표면조도와 미케니칼 텍스쳐 지역의 표면조도는 각각 대략적으로 4nm 와 7nm 감소되었다. 탄성계수와 경도값은 CSS test후에 증가하였고 가장 바깥쪽의 코팅층의 변형강화가 생겨났다. 자성층과 Ni-P 층 사이에 점착성의 문제가 확인되었다. TOF-SIMS 분석은 C 와 $C_2F_5$의 세기에 있어서 감소를 드러냈고 이것은 코팅 표면에 윤활제 요소의 마모를 확실시 할수 있는 결과로 나타났다.

• KSTLE International Journal
• /
• v.1 no.1
• /
• pp.12-20
• /
• 2000

Nano-wear and friction of carbon overcoated laser-textured and mechanically-textured computer hard disk were characterised after contact start/stop (CSS) wear test. Various analytical and mechanical testing techniques were employed to study the changes in topography, roughness, chemical elements, mechanical properties and friction characteristics of the coating arising from the contact start/stop wear test These techniques include: the atomic force microscopy (AFM), the continuous nano-indentation test, the nano-scratch test, the time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and the auger electron spectroscopy (AES). It was shown that the surface roughness of the laser-textured (LT) bump and mechanically textured (MT) Bone was reduced approximately am and 7nm, respectively, after the CSS wear test. The elastic modulus and hardness values increased after the CSS test, indicating straining hardening of the top coating layer, A critical load was also identified fer adhesion failure between the magnetic layer and the Ni-P layer, The TOF-SIMS analysis also revealed some reduction in the intensity of C and $C_2$$F_59$, confirming the wear of lubricant elements on the coating surface.

• Carbon letters
• /
• v.5 no.2
• /
• pp.68-74
• /
• 2004

The polymer with contents of $C_{60}$ up to 57 wt.% was produced by mutual condensation of fullerene $C_{60}$ and ethylenediamine. The investigations of this polymer as well as pristine fullerene to comparison were carried out by FT-IR and UV-Vis spectroscopy, ToF-SIMS, TGA, and elemental analysis. At least three kinds of components was revealed as building blocks of polymer. The fullerene cage underwent only distortion but didn't destroy during formation of polymer. The pure fullerene was found as an intermediate of the thermal decomposition of polymer. The conclusion that this polymer could serve as precursor to produce carbon nanomaterial with high concentration curved graphene sheets and can be used for gas adsorption and electrochemical application was made.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.113-114
• /
• 2013

Time-of-flight secondary ion mass spectrometry (TOF-SIMS) imaging is a powerful technique for producing chemical images of small biomolecules (ex. metabolites, lipids, peptides) "as received" because of its high molecular specificity, high surface sensitivity, and submicron spatial resolution. In addition, matrix-assisted laser desorption and ionization time-of-flight (MALDI-TOF) imaging is an essential technique for producing chemical images of large biomolecules (ex. genes and proteins). For this talk, we will show that label-free mass imaging technique can be a platform technology for biomedical studies such as early detection/diagnostics, accurate histologic diagnosis, prediction of clinical outcome, stem cell therapy, biosensors, nanomedicine and drug screening [1-7].

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.231-231
• /
• 2012

Correct determination of the interface locations is critical for the calibration of the depth scale and measurement of layer thickness in SIMS depth profiling analysis of multilayer films. However, the interface locations are difficult to determine due to the unwanted distortion from the real ones by the several effects due to sputtering with energetic ions. In this study, the layer thicknesses of Si/Ge and Si/Ti multilayer films were measured by SIMS depth profiling analysis using the oxygen and cesium primary ion beam. The interface locations in the multilayer films could be determined by two methods. The interfaces can be determined by the 50 at% definition where the atomic fractions of the constituent layer elements drop or rise to 50 at% at the interfaces. In this method, the raw depth profiles were converted to compositional depth profiles through the two-step conversion process using the alloy reference relative sensitivity factors (AR-RSF) determined by the alloy reference films with well-known compositions determined by Rutherford backscattering spectroscopy (RBS). The interface locations of the Si/Ge and Si/Ti multilayer films were also determined from the intensities of the interfacial composited ions (SiGe+, SiTi+). The determination of the interface locations from the composited ions was found to be difficult to apply due to the small intensity and the unclear variation at the interfaces.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.212-212
• /
• 2014

이트리아 안정화 지그코니아(Yttria-stabilized zirconia, YSZ)는 이트리아의 첨가에 의해 지르코니아에 생성된 산소 빈자리(oxygen vacancy)로 $O^{2-}$ 이온이 전도성을 가지게 되는 특징이 알려지면서 최근 고체산화물 연료전지연구에서 많은 관심을 받고 있다.[1] YSZ를 기반으로한 고체산화물 연료전지의 특성을 개선하기 위해서는 YSZ 내에서의 산소교환 메카니즘을 이해하는 것이 매우 중요하다. 본 연구에서는 $^{18}O2$ 추적 기체(tracer gas) 이용하여 확산된 YSZ박막에서의 산소 확산 거동을 초미세이차이온질량분석기(Nano Secondary Ion Mass Spectrometry, Nano SIMS)를 이용하여 조사하였다. Nano SIMS는 작은 입사 이온빔의 크기를 구현할 수 있고, 다중검출기를 이용하여 높은 질량분해능으로 간섭없이 산소동위원소를 동시에 모두 검출할 수 있는 장점이 있다. 본 발표에서는 Nano SIMS를 이용한 YSZ박막에서의 산소 거동 평가 결과를 상세하게 보일 것이다.

• Corrosion Science and Technology
• /
• v.11 no.4
• /
• pp.141-150
• /
• 2012

Stress corrosion cracks in Alloy 600 compact tension specimens tested at $325^{\circ}C$ in a simulated primary water environment of pressurized water reactor were analyzed by analytical transmission electron microscopy and secondary ion mass spectroscopy (SIMS). From a fine-probe chemical analysis, oxygen was found on the grain boundary just ahead of the crack tip, and chromium oxides were precipitated on the crack tip and the grain boundary attacked by the oxygen diffusion, leaving a Cr/Fe depletion (or Ni enrichment) zone. The oxide layer inside the crack was revealed to consist of a double (inner and outer) layer. Chromium oxides existed in the inner layer, with NiO and (Ni,Cr) spinels in the outer layer. From the nano-SIMS analysis, oxygen was detected at the locations of intergranular chromium carbides ahead of the crack tip, which means that oxygen diffused into the grain boundary and oxidized the surfaces of the chromium carbides. The intergranular chromium carbide blunted the crack tip, thereby suppressing the crack propagation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.397-397
• /
• 2010

Bone is considered as hierarchically organized biocomposites of organic (collagen) and inorganic (hydroxyapatite) materials. The precise structural dependence between hydroxyapatite (HAp, $Ca_{10}(PO_4)_6(OH)_2)$ crystals and collagen fibril is critical to unique characteristics of bone. To meet those conditions and obtain optimal properties, it is essential to understand and control the initial growth mechanisms of hydroxyapatite at the molecular level, such as other nano-structured materials. In this study, collagen fibrils were prepared by adsorbing native type I collagen molecules onto hydrophobic surface. Hydrophobicity was introduced on the Si wafer surface by using PECVD (plasma enhanced chemical vapor deposition) method and cyclohexane as a precursor. Biomimetic nucleation and growth of HAp on the self-assembled collagen nanofibrils were occurred through incubation of the sample in SBF (simulated body fluid). Chemical and morphological evolution of HAp nanocrystals was investigated by surface-sensitive analytical techniques such as ToF-SIMS (Time-of-Flight Secondary Ion Mass Spectrometry) and AFM (Atomic Force Microscopy) in the early growth stages (< 24 hrs). The very initial stages (< 12 hrs) of mineralization could be clearly demonstrated by ToF-SIMS chemical mapping of surface. In addition to ToF-SIMS and AFM measurement, scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction analysis were conducted to characterize the HAp layer in the late stages. This study is of great importance in the growth of real bone-like materials with a structure analogous to that of natural bones and the development of biomimetic nanomaterials.