• Journal of Yeungnam Medical Science
• /
• v.7 no.1
• /
• pp.81-93
• /
• 1990

The author fractographically analyized the cause of metal failure(the first time this procedure has been used for this metal failure)and also analyized it clinically. In this study, I selected eight cases which have been analyized fractographically. In all these cases, the analysis was done after treatment of metal failure of implants internally fixed to femur shaft fractures at the Department of Orthopedic Surgery, Yeung-Nam University Hospital during the six year period from May 1983 to September 1989. 1. Metal failure occured in five dynamic-compression plates, one Jewett nail, one screw in Rowe plate, and one interlocking nail. 2. The clinical cause of metal failure was deficiency of medial butress in five cases, incorrect position of implant in one case, and incorrect selection of implant in two cases. 3. The time interval between internal fixation and metal failure was four months in one case, between five months to twelve months in six cases, three years in one case. 4. The fractographically analytical cause of metal failure was ; first, impact failure, one case, second, fatigue failure, six cases, machining mark(stress liser), four cases type : low consistent cyclic fatigue failure irregular cyclic fatigue failure third, stress corrosion crack, one case. 5. 316L Stainless Steel has good resistance to corrosion. However, when its peculiar surface film is destroyed by fretting, it shows pitting corrosion. This is, perhaps, the main cause of metal failure. 6. It is possible that mechanical injury occured in implants during the manufacturing of implants or that making a screw hole is the main cause of metal failure.

• Journal of Trauma and Injury
• /
• v.29 no.3
• /
• pp.76-81
• /
• 2016

Purpose: The purpose of this study was to compare the data comprehensively including not only the clinical and radiographic outcomes but some parameters related to operation between the minimally invasive plate osteosynthesis (MIPO) technique and intramedullary nailing (IMN) for treatment of segmental tibia shaft fractures. Methods: We conducted a retrospective study of 31 patients (mean age, 49.3 years, range, 27-74 years), with a mean follow-up of 14.1 months (range, 12-19 months) with acute segmental tibial fractures (AO 42-C2) who underwent either surgical treatment of MIPO or IMN. In accordance with the Gustilo-Anderson classification, 11 were type I, 5 were type II, and 15 were type III. Initial compartment syndrome was confirmed in 2 cases. Results: There were no statistically significant differences in terms of the patient demographic data between the two groups. The time to definitive fixation was longer in the MIPO group (mean $13.7{\pm}10.9days$; range, 2-27) than in the intramedullary group (mean $5.4{\pm}9.6days$; range, 0-35) with statistically significant difference (p=0.002). Bony union was observed in most of cases but except 5 cases of nonunion were diagnosed (3 in the MIPO vs 2 in IMN, p=0.188). The average bone healing time was 27.1 weeks (10 to 56 weeks) in MIPO group and 23.2 weeks (13 to 66 weeks) in IMN group, respectively (p=0.056). Overall complications were 5 cases in MIPO group and 2 cases in the IMN group. Difference in LEFS was not statistically significant between both groups (p=0.824). Conclusion: This study showed that segmental tibia shaft fractures treated with both MIPO and intramadullary nailing was challenging with relatively high complication rate. A well planned sequential strategy with keeping the soft tissue and personality of fracture in mind is utmost significant as much as the choice of surgical modalities.

• Archives of Reconstructive Microsurgery
• /
• v.18 no.1
• /
• pp.27-30
• /
• 2009

Purpose: Recently, replantation of fingertip amputation, Zone I by Yamano classification, is still difficult because digital arteries branch into small arteries and also digital veins are hard to separate from the immobile soft tissue. However the replantation of fingertip in adults is a well-established procedure, but the replantation in infant or child is still uncommon. Therefore we present one case of replantation of the fingertip of the small finger in 12-months-old patient. Methods: We experienced a 12-months-old male amputation of small finger. It had been amputated completely at the level of Zone I by Yamano classification. Replantation was performed using the arteryonly technique with neither vein nor nerve repair. Because the artery has been damaged, it is still possible to make a direct suture by transposing the arterial arch in an inverted Y to I arterial configuration. Venous drainage was provided by an external bleeding method with partial nail excision and repaired margin for approximately 7 days. Results: We were performed replantation in infant with only-arterial anastomosis successfully, result in good recovery of aesthetic and functional outcome. Conclusion: In conclusion, although fingertip injury was difficult to replantation in infant and child, we must try it. Because of its functional and cosmetic advantage.

• Archives of Reconstructive Microsurgery
• /
• v.18 no.2
• /
• pp.79-83
• /
• 2009

Purpose: Avulsion injuries of digits have been presented for a long time as complex management problems. Despite of microsurgical advances, it is difficult to achieve good functional results and their management remains somewhat controversial. However, in a finger there are three transverse digital palmar arches. The middle and distal transverse digital palmar arches are consistently large(almost 1 mm) and may be used for arterial vessel repairs either proximally or distally, depending on the length and direction needed. 39-year-old man presented with avulsion amputation of the ulnar three digits, was operated using only arterial anastomosis with rerouting the transverse digital palmar arches. Methods: Replantation was performed using the artery-only technique. Because the digital arteries had been damaged, we did that the transverse digital palmar arches were transposed in an inverted Y to I configuration and were lengthened with rerouting them for the purpose of direct anastomosis of the digital artery. Venous drainage was provided by an external bleeding method with partial nail excision and external heparin irrigation. Results: The authors conclude that complete avulsion amputations with only soft tissue at the distal to insertion of the flexor digitorum superficialis tendon were salvageable with acceptable functional results. All three fingers survived. Conclusion: With technical advancements, the transverse digital palmar arches play an important role for finger amputation. Three digital palmar arches give us additional treatment option for the finger amputation. In this case, replantation with only-arterial anastomosis was successful and we obtained good aesthetic and functional outcome.

• Hip & pelvis
• /
• v.35 no.3
• /
• pp.193-199
• /
• 2023

Purpose: Cephalomedullary (CM) nailing is widely performed in treatment of elderly patients with femoral intertrochanteric fractures. However, in cases of fixation failure, re-operation is usually necessary, thus determining factors that may contribute to fixation failure is important. In this study, we examined factors affecting the occurrence of fixation failure, such as age or fracture stability, after CM nailing in elderly patients. Materials and Methods: This study was conducted retrospectively using registered data. From April 2011 to December 2018, CM nailing was performed in 378 cases diagnosed with femoral intertrochanteric fractures, and 201 cases were finally registered. Cases involving patients who were bed-ridden before injury, who died from causes unrelated to surgery, and those with a follow-up period less than six months were excluded. Results: Fixation failure occurred in eight cases. Comparison of the surgical success and fixation failure group showed that the mean age was significantly higher in the fixation failure group compared with the control group (81.3±6.4 vs. 86.4±6.8; P=0.034). A significantly high proportion of unstable fractures was also observed (139/54 vs. 3/5; P=0.040), with a significantly high ratio of intramedullary reduction (176/17 vs. 5/3; P=0.034). A significantly higher ratio of unstable fractures compared with that of stable fractures was observed in the intramedullary reduction group (132/49 vs. 10/10; P=0.033). Conclusion: Fixation failure of CM nailing is likely to occur in patients who are elderly or have unstable fracture patterns. Thus, care should be taken in order to avoid intramedullary reduction.

• Archives of Plastic Surgery
• /
• v.36 no.3
• /
• pp.318-321
• /
• 2009

Purpose: The bony mallet finger injury is generally managed by conservative treatments, but operative treatments are needed especially when the fractures involve above 30% of articular surface or distal phalanx is accompanied by subluxation in the volar side. This is the reason they often result in chronic instability, articular subluxation and unsatisfactory cosmetic. In this report, We describe new method using the hook plate as an operative treatment of Mallet finger deformity. Methods: Among 13 patients with Mallet finger deformity who came from February 2006 to February 2008, six patient were included in surgical indication. Under local anesthesia, H or Y type incision was made at the DIP joint area. After the DIP joint extension, the hook plate was put on the fracture line, and one self tapping screw was used for fixation. 2 hole plate which was one of the holes in 1.5 mm diameter was cut in almost half and bended through approximately $100^{\circ}$. Results: In all six cases which applied the hook plate, complications such as loss of reduction or nail deformity were not seen. In only one patient, hook pate was removed due to inflammatory reaction after surgery. At 2 weeks after operation, active motion of DIP joint was performed. The result was satisfactory not only cosmetically but also functionally. At 6 weeks after operation, the range of motion of DIP joint was average $64^{\circ}$. Conclusion: The purpose of the operative treatment for mallet finger deformity using the hook plate is to provide anatomical reduction with rigid fixation and to prevent contracture at the DIP joint. While other operations take 6 weeks, the operation using the hook plate begins an active motion at 2 weeks after operation. Complication rate was low and the method is rather simple. Thus, the operation using the hook plate is recommended as a good alternative method of the mallet finger deformity treatment.