• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.302-308
• /
• 2013

This study is a preliminary investigation of the influence of surface characteristics of substrates on detergency of particulate soil. The surface of PET film was modified with NaOH and NaOH+ethylene diamine on different times. The surface morphology of the film was scanned by AFM and surface energies were calculated from measured contact angles between several solutions and film based on the geometric mean and a Lewis acid base method. The surface morphology of PET film treated with NaOH and NaOH+ethylene diamine became more etched, and the surface area, surface roughness and the coefficient of friction of film increased with treatment of NaOH and NaOH+ethylene diamine. The contact angle of film treated with NaOH and NaOH+ethylene diamine decreased in water and surfactant solution; in addition, the surface energy increased was largely attributed to the increased portion on the polar surface energy of film. However, the effect of the diamine addition to the NaOH treatment solution on surface characteristics of PET film was insignificant.

• 한국환경농학회지
• /
• 제24권3호
• /
• pp.232-237
• /
• 2005

This study was conducted to elucidate the effects of NaOH fusion treatment on Na-P1 zeolite synthesis from fly ash and to evaluate its optimal condition. NaOH fusion treatment of fly ash led to Na-P1 zeolite with shorter reaction time and higher quality compared that of simple hydrothermal method. Mixed zeolite phases of Na-P1 and hydroxy sodalite were formed by the fusion treatment below $450^{\circ}C$, whereas only Na-P1 zeolite was formed above $550^{\circ}C$. Ratio of NaOH/fly ash, reaction times, fusion temperature and solid/liquid ratio strongly affected the kind and crystallinity of the zeolite formed. The CEC of Na-P1 zeolite formed at the optimum reaction conditions of NaOH/fly ash ratio 0.9 and solid/liquid ratio $1/5.0{\sim}1/7.5$ after NaOH fusion treatment at $550^{\circ}C$ for 2 hours was about $398cmol^+kg^{-1}$ which was 40% higher than those of control products. Therefore, it is clear that NaOH fusion treatment of fly ash in open system could lead to Na-P1 zeolite with high purity.

• Membrane and Water Treatment
• /
• 제8권2호
• /
• pp.149-160
• /
• 2017

This study investigated effects of NaOH cleaning on the intrinsic permeability of polyvinylidene fluoride (PVDF) membranes and flux recoveries and membrane resistances under various conditions encountered during ultrafiltration in water treatment plants. The NaOH cleaning using 10,000 mg/L NaOH led to discoloration of PVDF membranes and had little effect on water flux. The NaOH cleaning was efficient in removing the fouling layer caused by humic water. However, long filtration induced a fouling layer that was not removed easily by NaOH cleaning. The lower temperature during filtration yielded rapid increases in transmembrane pressure and decreases in NaOH cleaning efficiency. The alkaline cleaning of PVDF changed the membrane properties such as the hydrophobicity and morphology. Foulant properties, operational conditions such as temperature, and chemical agents should be considered for cleaning strategies for PVDF applied in water treatment.

• 한국잠사곤충학회지
• /
• 제42권1호
• /
• pp.31-35
• /
• 2000

When insoluble sericin was hydrolyzed by treatment of NaOH solution, the solubility was increased with higher treatment temperature and longer treatment time. Whereas it was decreased in addition of NaHSO$_3$. As the results of electrophoresis in sericin powder obtained by the NaOH treatment, a distinguishable band was not confirmed. Average degree of polymerizations(A.D.P.) of sericin hydrolyzed by NaOH solutions were about 19.6∼22.1 and average molecular weight(M.W.) were about 2,200∼2,500. The longer hydrolysis time increased the whiteness of sericin powder. As the results of amino acid analysis, the contents of Thr., Tyr., and Ser. were decreased in NaOH hydrolysis as compared to HCl hydrolysis. In DSC analysis, thermal deformation and pyrolysis peak located at near 230$\^{C}$ and 320$\^{C}$, respectively.

• Tuberculosis and Respiratory Diseases
• /
• 제65권5호
• /
• pp.379-384
• /
• 2008

연구배경: NaOH (sodium hydroxide) 기법을 이용한 전처리 객담과 NALC-NaOH (N-acetyl-L-cysteine-sodiumhydroxide) 기법을 이용한 객담의 항산균 도말 및 결핵균배양 양성률 그리고 배지 오염률을 비교하여 실험실 검사과정 중의 일부분을 개선함으로써 검사 결과의 개선이 가능한 지 확인하고자 하였다. 방 법: 2007년 6월부터 2008년 6월까지 국립마산병원에서 객담 검사가 시행된 환자를 대상으로 환자에게서 객담배출 요령을 충분히 교육한 후 두개의 객담 검체를 채취하여 통상적인 NaOH 기법과 NALC-NaOH 기법을 각각 적용한 후 도말 및 배양 결과 그리고 배지 오염률을 비교하였다(n=436). 결 과: 항산균 도말 검사에서는 NaOH 기법에 비하여 NALC-NaOH 기법이 다소 높은 양성률(33.0% vs. 39.0%)을 보였으나 통계적인 유의성은 없었다(p=0.078). 결핵균배양 검사에서는 배지 오염률(culture contamination)은 각각 3.2%와 3.0%로 유의한 차이는 보이지 않았다. 배양양성률은 NALC-NaOH 기법이 통계적으로 유의하게 높은 배양 양성률(39.7% vs. 28.0%, p=0.0003)을 보였으며, 배양 결과를 도말 검사 결과와 연관 지어 분석하였을 때 도말 검사상 음성인 경우 NaOH 기법과 NALC-NaOH 기법은 각각 7.2%와 15.8% (p=0.0017), scanty를 보인 객담의 경우 각각 42.9%와 60.8% (p=0.036)의 배양 양성률을 보여 통계적으로 의미 있는 차이를 보였다. 결 론: 도말 검사에서 음성이나 scanty를 보여 상대적으로 결핵균의 수가 적은 객담의 경우 NALC-NaOH를 이용함으로써 배양 양성률을 개선 시킬 수 있었으며 이는 임상적으로 폐결핵의 진단과 치료 경과 관찰에 직접적인 도움을 줄 수 있음을 보여주었다.

• 한국식품과학회지
• /
• 제36권1호
• /
• pp.147-151
• /
• 2004

난백에 NaOH, 열, 및 효소를 처리하였을 때, 난백 중의 ovomucoid(OM) 및 ovalbumin(OA)의 항원성 변화를 항OM 및 항OA 항체를 이용하여 간접경합 ELISA로 조사하였다. 효소처리는 OM의 항원성을 효과적으로 감소시키지 못한 반면 OA의 항원성은 식물성, 미생물성 protease를 사용하였을 때 약 1/5,000-1/100,000로 감소되었다. 열처리를 한 난백 중 OM은 $100^{\circ}C$까지 거의 변화하지 않으나 $121^{\circ}C$ 처리에서는 난백의 항원성이 OM은 1/250으로 감소되었다. OA의 항원성은 열처리에 의해 오히려 증가되었으며 최고 100배까지 증가되는 것으로 나타났다. NaOH를 농도별로 처리한 난백 중 OM의 항원성 변화는 0.3%부터 감소하기 시작하여 1%이상에서 항원성이 거의 제거되었다. 반면 OA의 경우는 모든 NaOH 처리농도에서 항원성이 증가하였다. NaOH 처리에 추가적인 열처리($70^{\circ}C$, 15분)를 실시한 것은 난백중 OM과 OA의 항원성 감소에 다소 효과적인 것으로 나타났다.

• 한국응용과학기술학회지
• /
• 제32권2호
• /
• pp.240-247
• /
• 2015

석탄회를 NaOH로 용융시킨 후 수열 처리에 의하여 제올라이트 A를 합성하였다. NaOH/석탄회의 비, 용융 온도, $NaAlO_2$의 첨가량, 수열 처리 온도 및 시간이 생성된 제올라이트의 종류와 결정도에 미치는 영향에 대하여 연구하였다. 결정도가 높은 제올라이트의 생성에 필요한 최적의 NaOH/석탄회의 중량비는 1.2, 최적의 용융 온도는 $550^{\circ}C$이었다. 용융된 석탄회로부터 $Si^{4+}$ 와 $Al^{3+}$의 용출은 교반 시간의 영향을 받지 않았다. 생성된 제올라이트의 형태는 첨가한 $NaAlO_2$의 영향을 받는 것으로 나타났다. 적은 양의 $NaAlO_2$를 첨가하면 제올라이트 X가 생성되나 $NaAlO_2$의 양이 증가하면 단일상의 제올라이트 A가 생성되었다. 수열처리 시간과 온도가 증가하면 제올라이트 A는 hydroxysodalite로 변화 하였다. 승온 속도를 낮춰 반응 온도까지의 도달시간을 증가시키면 결정도가 좋은 제올라이트 A를 얻을 수 있었다.

• 한국잠사곤충학회지
• /
• 제39권2호
• /
• pp.197-202
• /
• 1997

To hydrolyze silk fibroin was treated with NaOH solution on various concentrations and times. And it was examined that the addition effects of NaHSO3 solution on the solubility and colouring of silk fibroin. As obtained results are as follows; The more increasement of concentration and time of NaOH treatment, the more increasement of solubility but solubility was slight above 3% concentration of NaOH. Fibroin yield was decreased above 3% concentration. This was due to formation of peptide or amino acids below molecular weight 3,000. Most of molecular weight distribution came out to be under 3,000 in 2% concentration and 4hrs of NaOH treatment. The more increasement of adding concentration and 4hrs of NaOH treatment. The more increasement of adding concentration of NaHSO3, the more reduction of solubility but white index of powder increased. In the results of FT-IR spectras of silk fibroin powder obtained by various concentrations of NaHSO3 treatment, the absorbent peak at 3,400 cm-1 which was considered as -CH=N- (azomethine) was disappeared by the more addition of NaHSO3. It showed that absorbent peak of $\beta$-fibroin moved into low temperature region and transferred to $\alpha$- and random coil structure through the DSC experiment. In the results of amino acid analysis, alkali hydrolysis reduced the oxy amino contents acid like serine and tyrosine, but increased the glycine content by the more addition of NaHSO3.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.1-7
• /
• 1994

Cotton fiber and NaOH-mercerized cotton fiber had been treated by liquid ammonia and were dyed with two direct dyes, C.I. Direct Red 2 and Blue 1. The effect of the treatment on the rate of dyeing, dye adsorption isotherm, and affinity were studied. The rate of dyeing was increased in the order of NaOH-mercerized> NaOH/liquid ammonia-treated > liquid ammonia-treated>Untreated cotton irrespective of kind of dyes. The rate of dyeing for NaOH-treated fiber considerably increased, whereas liquid ammonia-treated or NaOH/liquid ammonia-treated did not because the structural transformation was not enough for the dyes to penetrate easily into the liquied ammonia-treated cottons. The time of half-dyeing was considerably reduced by mercerizing with NaOH, but lengthened by liquid ammonia treatment because of increased equilibrium dye exhaustion especially in dyeing with C.I. Dierect Red 2. In spite of a short time of the ammonia treatment for 4 seconds, the equilibrium exhaustions of both of direct dyes, C.I. Direct Red 2 and C.I. Direct Blue 1, were increased in proportion to internal volume of treated cotton under a condition of fixed affinity.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.37-43
• /
• 2016

Various mechanical and chemical pretreatment methods including alkali treatment, pre-beating, enzyme treatment and oxidation treatment have been used to reduce the production energy of the microfibrillated cellulose (MFC). Among them, alkali swelling can be helpful to reduce the energy consumption because the internal bonding between fibrils could be weakened. In this study, dimethyl sulfoxide (DMSO) was used as a cosolvent to improve alkali pretreatment efficiency and the effects of NaOH concentration during NaOH-DMSO swelling on changes in fiber characteristics of softwood bleached kraft pulp (SwBKP) were elucidated. For alkali treatment in H2O-DMSO solvents, fiber length were decreased with increasing NaOH concentration while fiber width, curl and WRV were increased. WRV began to increase at 8% NaOH solution. In addition, above 8% concentration of NaOH, crystalline structure of pulp fibers converted from cellulose II to cellulose III by DMSO cosolvent. Comparing the previous results with this study, it was shown that DMSO cosolvent could promote swelling of pulp fibers and thus reduce NaOH concentration for the maximum swelling of fibers.