• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.274-279
• /
• 1996

Diffusion coefficient is a critical parameter for predicting radiological source term(migration rate and flux of radionuclide) through given near field conditions in spent fuel or high level waste repository. The effect of exchangeable cation-$Na^+$ and $Ca^{2+} - on the diffusion of $I^- \;and^3H$ (as HTO) in compacted bentonite was examined using a through-diffusion method. Bentonite material used here was compacted to a density of 1.3 Mg/m$^3$, and Na-bentonite was saturated with a solution of 100 mol NaCl/m$^3$ and Ca-bentonite with 50 $mol\;CaCl_2$/m$^3$. The results show that effective diffusion coefficients are generally higher by a factor of two to five in Ca-than Na-clay. This is attributed to the larger particle size of Ca-compared to Na-bentonite; hence, Ca-bentonite has a greater proportion of relatively large pores, which make a greater contribution to mass transport than small pores. Although the nature of the exchangeable cation affects mass diffusion in compacted bentonite, the effect is small and not likely to influence performance assessment modeling of compacted bentonite-based barriers.

• 동굴
• /
• 제71호
• /
• pp.5-11
• /
• 2006

A theoretical investigation of the solid phase mechanochemical synthesis of nano sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3 mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano TlCl by dilution of initial (2NaCl+$Tl_2SO_4$) mixture with the exchange reaction product (diluent,$zNa_2SO_4$, z=z*=11.25) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano TlCl obtained experimentally were compared with those for the model reaction KBr+TlCl+zKCl=(z+1) KCl+TlBr (z=z1*=13.5), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• 한국환경보건학회지
• /
• 제35권4호
• /
• pp.295-303
• /
• 2009

A simulated wastewater containing the dye Rhodamine B (RhB) was electrolytically treated using a three-dimensional electrode reactor equipped with granular activated carbon (GAC) as particle electrode. The effect of type of packing material (GAC, ACF, Nonwoven fabric fiber coated with activated carbon), amounts of GAC packing (25-100 g), current (0.5-3 A) and electrolyte concentration (0.5-3 g/l) was evaluated. Experimental results showed that performance for RhB decolorization of the 3 three-dimensional electrodes lie in: GAC > Nonwoven fabric fiber > ACF. When considered RhB decolorization, oxidants concentration and electric power, optimum GAC dosage was 50 g. Generated concentration of 3 oxidants ($ClO_2$, free Cl, $H_2O_2$) was increased with increase of applied current, however optimum current for RhB degradation was 2.5 A. The oxidants concentration was increased with increase of NaCl concentration and optimum NaCl dosage for RhB degradation was 1.5 g/l.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.405-406
• /
• 2005

A theoretical investigation of the solid-phase mechanochemical synthesis of nano-sized target product on the basis of dilution of the initial powdered reagent mixture by another product of an exchange reaction is presented. On the basis of the proposed 3-mode particle size distribution in mechanically activated mixture, optimal molar ratios of the components in mixture are calculated, providing the occurrence of impact-friction contacts of reagent particles and excluding aggregation of the nanosized particles of the target reaction product. Derivation of kinetic equations for mechanochemical synthesis of nanoscale particles by the final product dilution method in the systems of exchange reactions is submitted. On the basis of obtained equations the necessary times of mechanical activation for complete course of mechanochemical reactions are designed. Kinetics of solid phase mechanosynthesis of nano-TlCl by dilution of initial (2NaCl + $Tl_2SO_4$) mixture with the exchange reaction product (diluent, $zNa_2SO_4$, $z=z^*=11.25$) was studied experimentally. Some peculiar features of the reaction mechanism were found. Parameters of the kinetic curve of nano-TlCl obtained experimentally were compared with those for the model reaction KBr + TlCl + zKCl = (z + 1) KCl + TlBr ($z=z_l^*=13.5$), and for the first time the value of mass transfer coefficient in a mechanochemical reactor with mobile milling balls was evaluated. Dynamics of the size change was followed for nanoparticle reaction product as a function of mechanical activation time.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.12.2-12.2
• /
• 2009

The work describes anoptimized process to highly efficient and convenient preparation in highthroughput magnetic human DNA separation with chemically functionalizedsilica-coated magnetic nanoparticles. The effect of nanoparticle's size and the surface's hydrophilicity change were studied for magnetic DNA separation process, inwhich the optimum efficiency was explored via the function of the amino-groupnumbers, particle size, the amount of the nanoparticles used, and theconcentration of NaCl salt. The DNA adsorption yields were high in terms of theamount of triamino-functionalized nanoparticles used, and the average particlesize was 25 nm. The adsorption efficiency of aminofunctionalized nanoparticleswas the 4-5 times (80-100%) higher compared to silica-coated nanoparticles only(10-20%). DNA desorption efficiency showed an optimum level of over 0.7 M ofthe NaCl concentration. To elucidate the agglomeration of nanoparticles afterelectrostatic interaction, the Guinier plots were calculated from small angleX-ray diffractions in a comparison of the results of electron diffraction TEM,and confocal laser scanning microscopy. Additionally, the direct separation ofhuman genomic DNA was achieved from human saliva and whole blood with highefficiency.

• Membrane and Water Treatment
• /
• 제5권4호
• /
• pp.251-263
• /
• 2014

The study contributes in the treatment of waste generated by the textile complex cotton of Draa Ben Khedda, Algeria. The azo dye "Direct Red Solophenyle 4GE" represents the base particle of the discharges and electrocoagulation with nanofiltration are used as a means of treatment. The solar photovoltaic is suitable for electrochemical process to reduce the energy cost. Several study parameters are considered in this work. The electrocoagulation batch gives the best reduction 37% for a dye concentration of 7.21 mg/L ($[NaCl]_{added}$=1g/L; $j=25.2mA/cm^2$). Coupling methods (electrocoagulation-nonofiltration) gives a complete discoloration rejecting concentration 52.4 mg/L (pHi = 7.6, $[NaCl]_{added}$=3g/L, $j=2.13mA/cm^2$). The result shows the coupling efficiency with a reduced amount of resulting slurry at the end of treatment.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.393-398
• /
• 2005

부유된 광물성 미립자는 강, 저수지 그리고 호수의 유속 및 운송력이 감소하는 곳에서 침전되며, 다른 중금속들에 의해 오염된다. 그 실예들이 퇴적물의 준설, 수질오염, 운하 및 수공구조물의 유지관리의 문제이다. 이런 침전 문제들을 다루기 위해선 물에 녹아있는 이온(NaOH, HCl, NaCl)의 첨가 및 밀도의 변화 아래 점착성 퇴적물의 물리-화학적인 특성의 이해가 필요하다. 왜냐하면 미립자인 점착성 퇴적물은 물리-화학적인 영향 때문에 쉽게 응집현상이 일어나며, 다른 특성을 갖게 되기 때문이다. 본 실험은 광물성 미립자(alumina 와 Quartz)를 가지고 담수 및 염분을 함유한 침강수주 안에서 실시되었다. 정수 중에 부유된 미립자의 침강속도는 압력센서(최대 10 mbar)로 측정되었다. 초기 농도 20,000 mg/l)까지 quartz의 침강 속도는 증가하였으며, 그 후 감소하였다. Quartz의 침강 속도는 산성에서 강한 응집현상 때문에 증가하였으며 알칼리성에서는 낮게 측정되었다. 그러나 alumina의 침강 속도는 그 정반대의 현상을 보였다.

• 한국축산식품학회지
• /
• 제34권4호
• /
• pp.500-506
• /
• 2014

This study investigated the effects of NaCl replacers (KCl, $CaSO_4$, and $MgSO_4$) on the quality and sensorial properties of pork patty. In the characteristics of spray-dried salt particles, KCl showed the largest particle size with low viscosity in solution. Meanwhile $CaSO_4$ treatment resulted in the smallest particle size and the highest viscosity (p<0.05). In comparison of the qualities of pork patties manufactured by varying level of Na replacers, $MgSO_4$ treatment exhibited low cooking loss comparing to control (p<0.05). Textural properties of KCl and $MgSO_4$ treatments showed similar pattern, i.e., low level of the replacers caused harder and less adhesive texture than those of control (p<0.05), whereas the hardness of these products was not different with control when the replacers were added more than 1.0%. The addition of $CaSO_4$ also manifested harder and less adhesive than control (p<0.05), but the textural properties of $CaSO_4$ treatment was not affected by level of Ca-salt. Eventually, sensorial properties indicated that KCl and $CaSO_4$ influenced negative effects on pork patties. In contrast, $MgSO_4$ showed better sensorial properties in juiciness intensity, tenderness intensity as well as overall acceptability than control, reflecting that $MgSO_4$ was an effective Na-replacer in meat product formulation.

• 공업화학
• /
• 제28권6호
• /
• pp.663-669
• /
• 2017

활성화제로 KOH, NaOH 및 $ZnCl_2$를 사용하여 폐감귤박으로부터 활성탄을 제조하였다. 최적조건(활성화제의 침적비율 300%, 활성화 온도 : KOH의 경우 $900^{\circ}C$, NaOH의 경우 $700^{\circ}C$, $ZnCl_2$의 경우 $600^{\circ}C$, 활성화 시간 1.5 h)에서 제조한 활성탄을 각각 ACK, ACN 및 ACZ로 명명하였다. 이들 활성탄을 사용하여 회분식 반응기에서 아세톤, 벤젠 및 메틸메르캅탄(MM) 등의 3가지 대상가스에 대한 흡착 특성을 검토하였다. 이들 활성탄에 의한 3가지 대상 가스의 흡착은 Langmuir 모델식보다는 Freundlich 모델식에 더 부합되는 것으로 나타났다. 그리고 흡착 속도실험결과는 유사 1차 속도식보다는 유사 2차 속도식에 잘 부합하였으며, 입자 내 확산 모델 결과는 흡착 과정에서 외부물질전달과 입자확산이 동시에 일어나는 것을 시사해 주었다.

• 대한기계학회논문집B
• /
• 제27권11호
• /
• pp.1542-1547
• /
• 2003

Although dielectric barrier discharge (DBD) in air has been applied to a wider range of aftertreatment processes for HAPs (Hazardous Air Pollutants), due to its high electron density and energy, its potential use as precharging dust particles is not well known. In this work, we measured size distributions of bimodal aerosol particles and estimated collection efficiency of the particles by an electrostatic precipitator (ESP) using DBD as particle charger. To examine the particle collection with DBD charger, nano size particles of NaCl(20∼100nm) and DOS (50∼500nm) were generated by a tube furnace and an atomizer, respectively. For experimental conditions of 60㎐, 11㎸ and 60 lpm, the particle collection efficiency for the hybrid system was over 85%, based on the number of particles captured.