• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.350-356
• /
• 1990

Functional properties such as nitrogen solubility, emulsifying property, foaming property, and water and oil absorption of sesame and perilla protein isolates were determined at pH range of 2-10 and ionic strength of 0-0.5M NaCl. Nitrogen solubility of protein isolates in distilled water showed minimum value at pH6.0 in sesame and at pH 4.0 in perilla and soybean protein isolates, and significantly increased above pH 8.0 in all samples. Addition of 0.1M NaCl solution increased nitrogen solubility, however, decreased in 0.5M NaCl solution. Emulsion activities of all the protein isolates showed minimum value at pH 4.0 and increased in 0.1M NaCl solutions while it was reduced in 0.5M NaCl solutions. The perilla protein isolate showed higher emulsion activity than that of soybean and sesame protein isolates at above pH 6.0. Foaming capacities of sesame and perilla protein isolates were lower than soybean protein isolate and generally all of the samples showed higher profiles in NaCl solutions. The foaming stability of soybean isolate decreased abruptly in 10min, while it was slowly decreased for sesame and perilla isolates during initial 30 min. Oil absorption capacity of perilla protein isolate was higher than that of sesame and soybean protein isolates. Water absorption capacity was similar among the three samples studied.

• Nutrition Research and Practice
• /
• v.17 no.1
• /
• pp.164-173
• /
• 2023

BACKGROUND/OBJECTIVES: Hyperglycemia is a major cause of diabetes and diabetesrelated diseases. Sodium butyrate (NaB) is a short-chain fatty acid derivative that produces dietary fiber by anaerobic bacterial fermentation in the large intestine and occurs in foods, such as Parmesan cheese and butter. Butyrate has been shown to prevent obesity, improve insulin sensitivity, and ameliorate dyslipidemia in diet-induced obese mice. Therefore, this study examined the effects and mechanism of NaB on the secretion of inflammatory cytokines induced by high glucose (HG) in THP-1 cells. MATERIALS/METHODS: THP-1 cells were used as an in vitro model for HG-induced inflammation. The cells were cultured under normal glycemic or hyperglycemic conditions with or without NaB (0-25 μM). Western blotting and quantitative polymerase chain reaction were used to evaluate the protein and mRNA levels of nuclear factor-κB (NF-κB), interleukin-6, tumor necrosis factor-α, acetylated p65, acetyl CREB-binding protein/p300 (CBP/p300), and p300 using THP-1 cells. Histone acetyltransferase (HAT), histone deacetylase (HDAC), and pro-inflammatory cytokine secretion activity were analyzed using an enzyme-linked immunosorbent assay. RESULTS: HG significantly upregulated histone acetylation, acetylation levels of p300, NF-κB activation, and inflammatory cytokine release in THP-1 cells. Conversely, the NaB treatment reduced cytokine release and NF-κB activation in HG-treated cells. It also significantly reduced p65 acetylation, CBP/p300 HAT activity, and CBP/p300 gene expression. In addition, NaB decreased the interaction of p300 in acetylated NF-κB and TNF-α. CONCLUSIONS: These results suggest that NaB suppresses HG-induced inflammatory cytokine production through HAT/HDAC regulation in monocytes. NaB has the potential for preventing and treating diabetes and its related complications.

• Journal of Animal Science and Technology
• /
• v.62 no.1
• /
• pp.103-110
• /
• 2020

Quality characteristics of chicken emulsion sausage manufactured with various levels of NaCl and 9 times heated bamboo salt (0.3%, 0.6%, 0.9%, and 1.2% respectively) were examined. The pH value of chicken emulsion sausage was increase tendency with increasing amount of bamboo salt, on the contrary in case of NaCl sample were decrease tendency with increasing amount of NaCl. Both before and after heating, redness of chicken emulsion sausage with bamboo salt treatments were upward trend with increasing amount of bamboo salt. water holding capacity (WHC) of 1.2% NaCl sample was significantly higher than 0.3%-0.9% (p < 0.05), but 0.9%, 1.2% bamboo salt samples were significantly higher than 0.3, 0.6 % (p < 0.05). Water loss of 1.2% NaCl and 0.9% bamboo salt samples were significantly lower than other treatment (p < 0.05). Protein solubility values significantly increased amount of bamboo salt and NaCl (p < 0.05), and samples of 0.9% NaCl and 0.6% bamboo salt values show similar values. Cooking yield of samples were increased tendency with increasing amount of NaCl and bamboo salt. Also viscosity values of sample containing 1.2% bamboo salt sample showed higher viscosity than other treatments. These results show that containing 1.2% NaCl chicken emulsion sausage and 0.9% bamboo salt chicken emulsion sausage were similar physicochemical properties. Therefore, bamboo salt is suitable for manufacturing chicken emulsion sausage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.1035-1042
• /
• 2002

This study was conducted to investigate the effect of sodium intake on serum lipids and glucose. 20 young adult women were fed the diets containing 290.5 mEq (high-Na diet) and 51.3 mEq (low-Na diets) Na for 6 days, respectively. Serum lipids, glucose, and other parameters after high-Na diet and low-Na diet were compared. The results would be summarized as follows. The mean age, body weight, height, and blood pressure of the subjects were 22.9$\pm$2.5 years,54.7+6.6 kg, 160.0$\pm$4.8 cm, 110.3$\pm$7.7/67.5$\pm$19.7 mmHg, respectively. Body weight, BMI, and diastolic blood pressure were significantly higher at the end of high-Na diet than of low-Na diet (p<0.001 p<0.001, p<0.05). However, there were not significantly different in height and systolic blood pressure between high- and low-Na diet. Serum cholesterol, LDL-cholesterol, and HDL-cholesterol were not significantly different with Na intakes. Serum triglyceride was significantly higher at the end of high-Na diet than of low- Na diet (p<0.05) Serum apo A-I was significantly decreased in low-Na diet, while apo B was increased (p<0.001, p<0.001). Thrombin time and prothrombin time, blood aggregation time were significantly faster following low-Na diet (p<0.001, p<0.05). There was not significantly different in serum glucose between high- and low-Na diet. However, serum insulin was significantly higher following low-Na diet (p<0.01). It is concluded that diastolic blood pressure, serum triglyceride, serum apo A-I, blood aggregation time were decreased in low-Na diet, while serum apo B and serum insulin were increased. These results suggest that Na-restricted diet affects not only blood Pressure but other biochemical parameters in blood. Therefore, for the patients who need restricted Na diet, it would be suggested that various biochemical changes should be carefully considered along with dietary Na manipulation.

• The Korean Journal of Physiology and Pharmacology
• /
• v.28 no.4
• /
• pp.313-322
• /
• 2024

Mutations within the SCN5A gene, which encodes the α-subunit 5 (Na_V1.5) of the voltage-gated Na⁺ channel, have been linked to three distinct cardiac arrhythmia disorders: long QT syndrome type 3, Brugada syndrome (BrS), and cardiac conduction disorder. In this study, we have identified novel missense mutations (p.A385T/R504T) within SCN5A in a patient exhibiting overlap arrhythmia phenotypes. This study aims to elucidate the functional consequences of SCN5A mutants (p.A385T/R504T) to understand the clinical phenotypes. Whole-cell patch-clamp technique was used to analyze the Na_V1.5 current (I_Na) in HEK293 cells transfected with the wild-type and mutant SCN5A with or without SCN1B co-expression. The amplitude of I_Na was not altered in mutant SCN5A (p.A385T/R504T) alone. Furthermore, a rightward shift of the voltage-dependent inactivation and faster recovery from inactivation was observed, suggesting a gain-of-function state. Intriguingly, the co-expression of SCN1B with p.A385T/R504T revealed significant reduction of I_Na and slower recovery from inactivation, consistent with the loss-of-function in Na⁺ channels. The SCN1B dependent reduction of I_Na was also observed in a single mutation p.R504T, but p.A385T co-expressed with SCN1B showed no reduction. In contrast, the slower recovery from inactivation with SCN1B was observed in A385T while not in R504T. The expression of SCN1B is indispensable for the electrophysiological phenotype of BrS with the novel double mutations; p.A385T and p.R504T contributed to the slower recovery from inactivation and reduced current density of Na_V1.5, respectively.

• Journal of Environmental Science International
• /
• v.30 no.1
• /
• pp.69-76
• /
• 2021

The purposes of this study were to evaluate the removal characteristics of COD, Ni, and P and to derive appropriate operating conditions for the plating wastewater according to NaOCl reaction time and pH operating conditions in the BPC unit process during the plating wastewater treatment process. As a results of evaluating the removal characteristics for raw wastewater by each BPC unit process, the removal efficiencies of COD, Ni and P in BPC 1-1 unit process were 72.8%, 99.1%, and 100.0%. Therefore, the proper reaction time of NaOCl was derived as 21.1 minutes. In order to maintain the +800 mV ORP and the reaction time of 20 minutes, the temporary injection and continuous injection of NaOCl in the BPC unit process were 13.7 mL and 18.7 mL, respectively. It was found that the temporary injection method of NaOCl reduced the chemical cost by 36.5% compared to the continuous injection method. Also, Ni showed the highest removal efficiency of 97.8% at pH 10.5. On the other hand, P showed a removal efficiency of 57.4% at pH 10.0.

• Korean Journal of Agricultural Science
• /
• v.21 no.1
• /
• pp.11-21
• /
• 1994

The halophile, Micrococcus sp. which produces RNase was isolated from salted and fermented food. The optimum growth condition of the Micrococcus sp. in pH 7.0 of complex medium containing 2M NaCl, and at $35^{\circ}C$. Optimum condition for enzyme production by this strain was when it was grown in the CM medium, containing 2% yeast extract, 1.5% casamino acid and 2M NaCl in the initial pH 8.5 for 2 days. The maximal RNase activity was observed at pH 8.0 and $55^{\circ}C$. The Km value for RNA was determined to be 5mg/ml by Lineweaver-Burk plot. The RNase activity in the absence of NaCl was maximum, but it was completely lost by adding of 1.25M NaCl and it was increased above 1.25M to 2.5M NaCl. When 2.5M NaCl was added, the activity of RNase showed 45% of maximum value.

• Journal of Applied Biological Chemistry
• /
• v.54 no.3
• /
• pp.153-158
• /
• 2011

Optimal culture conditions were characterized for production of crude biosurfactant of Bacillus subtilis JK-1. During incubation of B. subtilis JK-1, the bacterial growth pattern, changes of the surface tension at variable temperatures, pH and NaCl concentrations in bacterial culture medium were studied. The strain was able to grow and produce biosurfactant at $15-45^{\circ}C$, in the pH range of 6-10, and at 0-10% (w/v) NaCl. In case, culture broth pH was gradually changed to neutral or weak alkaline. Optimal culture conditions for crude biosurfactant production were at $35^{\circ}C$ and pH 7.0 after 48 h incubation and the surface tension of biosurfactant was 24.0 mN/m. Besides, as the concentration of NaCl was increased from 0 to 10% (w/v), the growth was decreased, pH of the culture broth was converted from weak alkaline to acidic, and the surface tension rised.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2021

The pH dependence of sorption distribution coefficient (Kd) of Np(IV) on MX-80 in Ca-Na-Cl type solution with the ionic strength of 0.3 M, which was similar to one of the reference groundwaters in crystalline rock, was experimentally investigated under the reducing conditions. The overall trend of Kd on MX-80 was independent of pH at 5 ≤ pH ≤ 10 but increased as pH increased at pH ≤ 5. The 2-site protolysis non-electrostatic surface complexation and cation exchange model was applied to the experimentally measured pH dependence of Kd and the optimized surface complexation constants of Np(IV) sorption on MX-80 were estimated. The values of surface complexation constants in this work agreed relatively well with those in the Na-Ca-Cl solution previously evaluated, suggesting that compared to Na+, the competition of Ca2+ with Np(IV) for surface complexation on MX-80 was not much strong in Ca-Na-Cl solution. The sorption model well predicted the pH dependence of Kd values but slightly overestimated the sorption at the low pH region.