• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.104.1-104
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.103.2-103
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1995.11a
• /
• pp.61-62
• /
• 1995

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.128-131
• /
• 1997

기본 조성식 M $n_{1-x}$/F $e_{2+x}$/ $O_4$(이하 Mg계), M $n_{1-x}$/F $e_{2+x}$/ $O_4$(이하 Mg계)의 식에서 x를 0.0,0.025,0.1,0.2로 변화시키고, 하소온도 80$0^{\circ}C$, 소결은도를 l10$0^{\circ}C$~12$50^{\circ}C$로 $50^{\circ}C$간격으로 변화 시켰을 때와 Mn계와 Mg계를 1:1로 흔합하였을 때, F $e_2$ $O_3$의 과잉 양이 증가할수록 비저항은 감소하였고, 저항온도계수 $\alpha$는 밀도와 비례하는 관계를 나타내었으며, B정수는 4600(K)에서 10500(K)의 범위를 나타내었다. 본 조성의 실험으로써 Mn-Ni-Co계 서미스터의 대체가 가능함을 확인할 수 있었다.있었다.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.115-120
• /
• 2008

The thermistors and AD590 are widely used for temperature measurement in space application. The resistance of thermistor will vary according to the temperature variation therefore the external voltage or current stimulus signal have to be provided to measure resistance variation. Recently high resolution electro optic camera system of satellite requires tight thermal control of the camera structure to minimize the thermal structural distortion which can affects the image quality. In order to achieve $1^{\circ}$(deg C) thermal control requirement, the accuracy of temperature measurement have to be higher than $0.3^{\circ}$(deg C). In this paper, the accuracy of temperature measurement using thermistors is estimated and analyzed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.407-410
• /
• 2000

(M $n_{l-x}$M $g_{l-x}$)F $e_{2+x}$ $O_4$(x=0.0, 0.025, 0.1, 0.2) for NTC(negative temperature coefficient) thermistor was prepared by calcining at 80$0^{\circ}C$ and sintering at from 1100 to 130$0^{\circ}C$ with 5$0^{\circ}C$ intervals while x was varied from 0.0 to 0.025, 0.1 and 0.2. The best linear property was obtained in the based specimen sintered at 120$0^{\circ}C$ with x=0.1 composition. Thermistor parameter, $B_{25~85^{\circ}C}$, was in the range of 5000~ 7300 [K]. Temperature coefficient of resistance, $\alpha$$_{25^{\circ}C}$, was -5.2 %/$^{\circ}C$. The results showed the possibility that Mn-Ni-Co based thermistor could be substituted by the composition used in this study was confirmed.med.d.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1855-1857
• /
• 1999

$Mn_{1-x}Fe_{2+x}O_4$, $Mg_{1-x}Fe_{2+x}O_4$ (x=0.0, 0.025, 0.1, 0.2) for negative temperature coefficient (NTC) thermistor were prepared by calcining at $800^{\circ}C$ and sintering from 1100 to $1250^{\circ}C$ with $50^{\circ}C$ intervals. The best linear property was obtained in the Mn-based sample sintered at $1200^{\circ}C$ with x=0.0 composition. Temperature coefficient of resistance, $\alpha$, was -3.0 %/$^{\circ}C$ in the Mg-based sample at $25^{\circ}C$. Thermistor parameter, B, was in the range of 2500 [K] $\sim$7400 [K]. The results show the possibility that Mn-Ni-Co based thermistor could be substituted by the composition used in this study.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.508-512
• /
• 1998

The NTC thermistors were sintered by using microwave hybrid heating method at $1100^{\circ}C$~$1300^{\circ}C$ and those electrical properties were investigated. The obtained $B_{25^{\circ}C/85^{\circ}C}$ values from temperature dependence of electrical resisitivity were around 3100~3200 K which were almost the same values as conventionally sintered ones. Compared with conventional sintering process, this process could complete whole sintering process within 20 minutes. This the processing time and energy consumption could be reduced through this rapid heating by using microwave hybrid heating.t there were showed only two peaks, glycolide melting peak and lower molecular weight melting peak without lauryl alcohol. Conversion increased slowly with the reaction time up to 50 minutes, and then gave a sudden increase above that. The reaction time to disappear in glycolide melting peak during polymerization was shortened with the increase of lauryl alcohol content. Zero-shear viscosity of polyglycolic acid decreased with the increase of free acid content in glycolide.ssional energy and bending hysteresis increased. \circled3 Surface characteristics such as friction coefficient and thickness variation of highly shrinkage fabrics became relatively roughened state. \circled4 Since stiffened and roughened characteristics of highly shrinkage fabrics, drapabilities of them were significantly lowered. Additionally thermal insulation property of high shrinkage fabric was higher than that of low shrinkage fabric due to bulky and thickened feature. From the results, it is considered that the silk fabrics with high filling shrinkage have the good bulkiness and heat keeping properties and thus they have the suitable characteristics for high quality men's and women's formal garments.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.6
• /
• pp.337-341
• /
• 2016

In this study, $ Ni_{0.79}(Mn_{2.21-x}Cu_x)O_4$ (x=0~0.25) specimens were prepared by using a conventional mixed oxide method. All specimens were sintered in air at $1,200^{\circ}C$ for 12 h and cooled at a rate of $2^{\circ}C/min$ to $800^{\circ}C$, subsequently quenching to room temperature. We investigated the structural and electrical properties of $ Ni_{0.79}(Mn_{2.21-x}Cu_x)O_4$ specimens with variation of CuO amount for the application of NTC thermistors. As results of X-ray diffraction patterns, all specimens showed the formation of a complete solid solution with cubic spinel phase. The relationship between ln ${\rho}$ and the reciprocal of absolute temperature(1/T) for the NTC thermistors was shown linearity, which exhibited the typical NTC thermistor properties. With increasing the amount of CuO, resistivity at room temperature, B-value, and temperature coefficient resistance decreased.

• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.438-446
• /
• 1994

인류는 지금 2차석기시대를 맞이하고 있으며 이 시대는 인공으로 만들어지는 돌인 세라믹이 단순히 용기나 도구로 사용되는 것 이외에 정보화사회에 있어서 기술의 관건이 될 지능소자로서 사용되고 있다. 세라믹은 내열성, 내식성, 내마모성이라는 특성으로 인해 많이 이용되어 왔지만 이러한 특성 이외에도 전자적 기능, 광학기능, 화학기능 등 "두뇌"도 우수한 재료라 할 수 있다. 더구나 세라믹은 인간을 대신하여 감지하는 것이 가능한 각종 센서로서도 폭넓게 이용되고 있다. 인간에 있어서 눈, 코, 귀, 혀, 피부 등 오감이 센서이며, 눈은 물체를 식별하는 것으로 빛을 검출하고 귀는 소리를 듣는 것으로 압력과 음파를 검출하고, 코는 냄새로 가스나 온도를 검출하고, 혀는 맛으로 미각을 검출하고, 피부는 촉각에 의한 압력, 온도, 습도를 검출하며, 인간의 오감에 대응되지 않는 것으로 세라믹 센서는 자기장을 감지할 수 있다. 이와같이 센서는 용도에 따라 수많은 센서가 개발되어 그 종류가 대단히 많기 때문에 모든 센서에 대해서 기술한다는 것은 어렵다. 그러므로 여기서는 센서중에서 기본적인 가스센서와 습도센서에 대해 소개하기로 한다. 소개하기로 한다.