• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.403-409
• /
• 2009

In the 1840s, Goodyear found out sulfur cure system, but cure time was too slow. So producing of rubber product takes a long time. In 1904, Oenslager et al. found that aniline is accelerated sulfur cure system. Recently, many rubber industries needed high yield and good quality. So, many researchers have studied a rubber system with fast vulcanization time and good mechanical properties. In this study, cure characteristics and mechanical properties of NR/BR compounds by accelerator with MBTS(2,2' Dithiobisbenzothiazole), TMTM(Tetramethylthiuram Monosulfide), ZDMC (Zinc dimethyldithiocarbamate), CBS(N-Cyclohexyl benzothiazolyl-2-sulfenamide), DPG(Diphenylguanidine) were evaluated. The results of the study indicate that cure charateristics($t_{90}$: 235 sec, $T_{max}$: 5.77 Nm) and mechanical properties (100, 300% modulus : 2,180, 5.656 Mpa and tear strength: 59.58 kgf/cm) of NR/BR compounds shows efficient acceleration with MBTS 1.5 phr, TMTM 0.5 phr, DPG 0.15phr. This is due to the synergistic activity of ternary accelerator system in rubber vulcanization.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.231-234
• /
• 1996

This paper considers the output regulation problems on uncertain systems. Using NR-estimator(on-line), a family of equilibrium points for the uncertain system is computed. The state variables of the closed loop system track the average value of the obtained equilibrium manifold by dynamic state feedback control.

• Macromolecular Research
• /
• v.16 no.6
• /
• pp.561-566
• /
• 2008

NR composites with different curing systems were aged thermally at 60, 70, 80, and $90^{\circ}C$ for 2-185 days in a convection oven, and the changes in the crosslink density were investigated as a function of the accelerated thermal aging. The overall crosslink densities increased with increasing aging time irrespective of the aging temperatures and curing systems. The changes in crosslink density were enhanced by increasing the aging temperature. The degree of the increased crosslink density was in the following order: "the conventional cure system > the semi-EV system > the EV system". For short term thermal aging, the change in crosslink density with the aging time was complicated, particularly for low temperature aging. The activation energies of the change in crosslink density with thermal aging using the conventional and semi-EV cure systems increased and then remained relatively constant with increasing aging time, whereas that of the specimen with an EV cure system tended to increase linearly. The experimental results were explained by the dissociation of the existing polysulfidic linkages and the formation of new cross links through the crosslinking-related chemicals remaining in the sample.

• Korean Journal of Clinical Pharmacy
• /
• v.24 no.2
• /
• pp.135-143
• /
• 2014

Purpose: Aim of this study was to gather and evaluate perceptions of investigators, IRB members, and IRB administrators on the appropriateness of IRB review process and bioethical oversight system of national R&D (NR&D) projects. Method: Investigators, IRB members, and IRB administrators at 17 different institutions were surveyed using convenience sampling and survey questionnaires were partially group-specialized to consider any differences between the groups. Results: Participants included 29 investigators, 37 IRB members, and 17 administrators with response rate of 100% (83 of 83). According to the responses obtained, insufficient preparation time for constructing protocol and gaining IRB approval was one of the main problems in the IRB review process (investigator 79.3%, IRB administrator 88.2%). Also, discrepancy between NR&D and IRB's protocol formats was another major issue (IRB members 96.4%, IRB administrator 100%) and most investigators (89.7%) had to modify the original NR&D protocol to obtain IRB approval. Moreover, it was reported that 13.8% of investigators and 31.3% of IRB administrators did not submit midyear reports to IRB and for bioethical issues of NR&D projects, 17.2% of investigators did not include information on project status and safety issues in the annual reports. Conclusion: In conclusion, for successful and ethical completion of R&D projects, revision of both IRB review process and NR&D project protocol formats as well as implementation of appropriate bioethical oversights are necessary.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.342-349
• /
• 2016

Characteristics of the swelling-induced wrinkles on the surfaces of natural rubber (NR) film were investigated. The wrinkle structure was generated by swelling of NR film pre-stretched and firmly bonded onto an aluminum substrate in hexane. A novel experimental method was adopted to replicate the swelling-induced wrinkles on the NR film using an epoxy-hardener system. To get insight into the wrinkle parameters; the wrinkle length (L), wrinkle distance (D), wrinkle height (H) and the angle between two consecutive wrinkles (${\theta}$), the cross-sections of the replicas obtained from saturated swollen NR film were examined using an optical microscopy (OM). From the OM images, the wrinkling parameters were measured as a function of the thickness of NR film from 0.42 to 1.76 mm. Also, it was evaluated that the effects of swelling time on the wrinkling parameters. The length (L), distance (D) and height (H) of wrinkles increased as the thickness of the NR film and the swelling time increased. However, the angle between the wrinkles (${\theta}$) showed a sharp decrease up to a swelling time of 200 minutes and slightly decreased afterwards.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.693-704
• /
• 2022

5G service uses mid-band (n78) than existing mobile communication frequencies, so it is necessary to improve 5G coverage by utilizing low-band frequencies below 2 GHz. To this end, the application of Dynamic Spectrum Sharing technology of LTE and 5G-NR system using most of the low-band frequencies is required. In this paper, signaling overhead factors for DSS application and RF issues for terminal implementation are derived, and signaling overhead ratios from the respective perspectives of 5G-NR and LTE for the 1.8GHz band (50MHz width) that can utilize wide-bandwidth among low-band frequencies are estimated. Also handset RF issues were analyzed. Based on the analysis results, if DSS technology using low band is applied, it is expected that excellent 5G service quality can be provided due to 5G coverage improvement when LTE traffic quickly migrates to 5G-NR.

• Elastomers and Composites
• /
• v.46 no.3
• /
• pp.237-244
• /
• 2011

Five natural rubber (NR) composites with different reinforcing systems of unfilled, carbon black, carbon black with silane coupling agent, silica, and silica with silane coupling agent were thermally aged and change of the crosslink densities by the accelerated thermal aging was investigated. The crosslink densities on the whole increased as the aging time elapsed irrespective of the reinforcing systems. The crosslink density changes became noticeable by increasing the aging temperature. For carbon black-filled composites, the silane coupling agent made the crosslink density change to be increased. For silica-filled composites, however, the silane coupling agent made the crosslink density increment reduced at 60 and $70^{\circ}C$ and it hardly affect the degree of the crosslink density change at 80 and $90^{\circ}C$. The activation energies for the crosslink density changes of the carbon black-filled samples increased continuously in a logarithmic fashion, whereas that of the silica-filled one showed a quasi-steady state ranges at aging times of 30-150 days. The activation energy of the unfilled sample increased exponentially with the aging time. The experimental results were explained with sulfur donation from the silane coupling agent, surface modification of the filler by the silane coupling agent, adsorption of curative residues on the silica surface, and release of the adsorbed curative residues.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.20-30
• /
• 1993

Liquid Chromatographic behavior of Pd(II) in Isonitosoethylacetoacetate imine IEAA-NR: R=H, CH3, C2H5, n-C3H7, n-C4H9, C6H5-CH2) Chelates were investigated by reversed phase high performance 1iquid chromatography on Micropak MCH-5 Column using Methanol /water as mobile phase. The optimum condition for the separation of Pd-Isonitrosoethylacetoacetate imine chelates were examined with respect to the flow rate, mobile phase strength. It was found that Pd(IEAA-NR)2 chelates were eluted in an acceptable range of the capacity factor value (0 $\leq$ log k' $\leq$ 1), The dependence of the logarithm of capacity factor(k') on the volume fraction of water in mixture with in the binary mobile phase was examined. Also, the dependence of k'on the liquid-liquid extraction distribution constant in methanol-water / n-alkane extraction system was on system was invert tigated for Pd(IEAA-NR)2. Both kinds of dependence are linear, which suggests that the retention of the electroneutral metal chelates be largely due to the solvophobic effect.

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.181-189
• /
• 2013

Unfilled, carbon black-filled, and silica-filled natural rubber (NR) composites were aged with a circular deformation at $60-90^{\circ}C$ and the recovery behaviors were investigated. The samples were aged under the altering aging medium systems of air and distilled water every day for 10 days. The order of the recoveries according to the filler systems was unfilled > silica > carbon black. The recoveries of the samples aged in the air to water altering system were greater than those of the samples aged in the water to air altering system. The initial aging medium dominantly influenced the deformation level.

• Elastomers and Composites
• /
• v.56 no.1
• /
• pp.20-31
• /
• 2021

There is an increasing demand for the rolling resistance reduction in truck bus radial (TBR) tires in the tire industry. In TBR tires, natural rubber is used as a base polymer to prevent wear and satisfy required physical properties (cut and chip). A binary filler system (silica and carbon black) is used to balance the durability of the tire and rolling resistance performance. In this study, natural rubber (NR) compounds applied with a binary filler system were manufactured at different cure temperatures for vulcanizate structure analysis. The vulcanizate structures were categorized into carbon black bound rubber, silica silane rubber network, and chemical crosslink density by sulfur. Regardless of the cure temperature, the cross-link density per unit content of carbon black had a greater effect on the properties than silica due to affinity with NR. The relationship analysis between the mechanical, viscoelastic properties with vulcanizate structure could be a guideline for manufacturing practical TBR compounds.