• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.540-542
• /
• 2008

By ETFOS software simulation to swiftly find out the shortcomings of the device structure and conserve the wastage of time cost in experiments, including the instruments deviations or human errors. Thereby we can calibrate the correct organic layer thickness by comparing the EL spectra with different NPB thicknesses.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.984-986
• /
• 2006

We report efficient inverted transparent blue OLEDs (ITOED) with an hole injection layer prepared by co-evaporation of $WO_3$ with NPB, which achieved a total current efficiency of 10.7 cd/A at $20mA/cm^2$ with light emits from both ITO bottom cathode and Au top anode in about 3:1 ratio.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.142-144
• /
• 2005

Main purpose of this study is a improved efficiency of Organic light emitting diodes(OLEDs) concerning $UV/O_3$ treatment. We investigated the efficiency of OLEDs by $UV/O_3$ treatment of ITO surface. We measured current density-voltage, luminance-voltage characteristics in different $UV/O_3$ treatment time and observed ITO surface roughness by using AFM(Atomic Force Microscope). The fundamental structure of the OLEDs was $ITO/NPB/Alq_3/LiF/Al$. We performed $UV/O_3$ treatment and found that $UV/O_3$ treatment enhanced the performance of OLEDs. We also found that change of surface roughness according to difference time a $UV/O_3$ treatment

• 한국전기전자재료학회논문지
• /
• 제20권3호
• /
• pp.257-262
• /
• 2007

Organic light-emitting diodes (OLEDs) with the high efficieney and long lifetime are of growing interest in next-generation displays. Among the factors influencing OLEDs properties, one of unstable factor is $Alq_3$ cationic species caused by the excess holes resided in $Alq_3$ layer. Therefore, we suppressed the accumulation of excess holes by using the mixed-hole transporting layer (MHTL) of NPB and CBP in multilayer green OLEDs. The devices with MHTL showed improved characteristics in the luminous efficiency and lifetime. More characteristics and the carrier transport mechanism will be discussed.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 춘계학술발표논문집
• /
• pp.335-338
• /
• 2006

전자수송층과 음극 사이에 $Al_2O_3$를 넣은 이중구조 음극을 갖는 유기발광다이오드를 제작하였다. 제작한 디바이스의 구조는 $ITO/NPB(40\;nm)/Alq_3(60\;nm)/Al_2O_3(0-1.5\;nm)/Al(120\;nm)$로 $Al_2O_3$의 두께를 변화시켰다. $Al_2O_3$의 두께가 0.3 nm일 때는 터널링에 의해서 전자주입이 증가하여 전류와 휘도가 모두 좋아졌다. 반면에 $Al_2O_3$의 두께가 0.5 nm일 때는 전류는 감소하지만 정공과 전자의 비율이 더 좋아져서 전류효율이 크게 향상되었다. 또한 $Al_2O_3$는 엑시톤이 음극과의 계면에서 발광하지 않고 소멸하는 것을 막아주어서 휘도를 증가시켰다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (상)
• /
• pp.319-322
• /
• 2002

최근 주목받고 있는 그리드 컴퓨팅 연구등에 주요한 요소로서 기대되어지는 고성능 클러스터 시스템들은 주로 과학 기술 응용연구를 위해 사용되어진다. 이러한 종류의 병렬 시스템은 특정 부품들을 사용하는데 그중 네트워크를 구성하는 부품들이 통상의 분산/병렬컴퓨팅에 주요한 역할요소로서 주목을 받아오고 있다. 이 논문에서는 myrinet, Gbit ethernet, Fast ethernet 장비에 대하여 각각 Netpipe, Linpack, NPB 등의 벤치마크를, 성능 실험을 동해 선정한 Pentium IV 1.7Mhz/1Gb Mem 16노드로 구성한 클러스터에 대하여 2종의 컴파일러를 사용하여 테스트하고 그 결과를 분서하였다. 상이한 성능 차를 보이는 장비간의 성능 비교를 통해 2002년 2월 현재 가능한 응용문제가 사용하고 있는 알고리즘에 따른 최적의 클러스터 시스템의 최적 구성을 도출 할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제31권10호
• /
• pp.2884-2888
• /
• 2010

Two red fluorescent DCJTB derivatives (Red 1 and 2) based on modified pyrans were synthesized and their electroluminescent properties were investigated. Multilayered OLEDs were fabricated with the device structure of ITO/NPB (40 nm)/Red 1, 2 or DCJTB (0.5 or 1%): $Alq_3$ (20 nm)/$Alq_3$ (40 nm)/Liq (2 nm)/Al. All devices exhibited efficient red emissions. In particular, a device containing emitter Red 2 as a dopant in the emitting layer, the maximum luminance was $8737\;cd/m^2$ at 12.0 V, the luminous and power efficiencies were 2.31 cd/A and 1.25 lm/W at $20\;mA/cm^2$, respectively. The peak wavelength of the electroluminescence was 638 nm with the CIE (x,y) coordinates of (0.63, 0.36) at 7.0 V.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.89-90
• /
• 2006

We synthesized emissive materiaJs, nameJy $Zn(HPB)_2$. The fundamentaJ structures of the OLEDs were ITO / NPB (40 nm) $Zn(HPB)_2$ (40 nm) / $Alq_3$:DCJTB (20, 30, or 40 nm) / LiF / AI. We varied the thickness of $Alq_3$:DCJTB from 20 nm to 40nm. We measured current density-voJtage and luminance-voJtage characteristics at room temperature. When the thickness of the Alq3:DCJTB layer was 40 nm, white emission is achieved. The CIE coordinates are (0.32, 0.33) at an applied voltage of 14V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.741-744
• /
• 2007

The research applied the processes of spin-coating and thermal-evaporating in proper order to deposit the hole transport material N,N'-Bis(naphthalen-1-yl)- N,N'-bis(phenyl)-benzidine (NPB) on the ITO substrate to make flexible organic light emitting diodes (FOLED) with double hole transport layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.1023-1026
• /
• 2007

Highly efficient inverted bottom emission organic light emitting device (IBOLED) with a structure of ITO/EIL/Alq3/NPB/WO3/Al was investigated. To enhance electron injection from ITO cathode to Alq3 EML layer, we introduced ultra thin Al layer and Liq layer between ITO and Alq3. The device characteristics showed tune on voltage of 4.5V, the maximum luminance of 21100 Cd/m2 and current efficiencies of 3.56 Cd/A.