• 제목/요약/키워드: NOx Emissions

검색결과 731건 처리시간 0.023초

물혼합 연료 및 EGR의 조합에 의한 디젤기관의 질소산화물과 매연미립자 동시저감 기술에 관한 연구 (Technology for Reducing NOx and Soot Particulate using EGR with Water Emulsified Fuel in Diesel Engines)

  • 박권하;박태인;김기형
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제21권4호
    • /
    • pp.356-363
    • /
    • 1997
  • Many research works have been carried out to investigate the factors governing the performance of diesel engine. The area of the study has been focused on reducing both of NOx and smoke because of many difficulties to reduce them simultaneously in diesel engines. One of the efforts is an application of EGR technology to reduce NOx emission, which is very effective, but increases other emissions and makes fuel economy worse. In order to solve the problem, EGR is employed with water emulsified fuel and tested in this paper. Emulsified fuel is produced by centrifugal mixer and the amount of water is controlled by water injector and pulse generator, and EGR rate is controlled with 6-step control valve. The chamber pressure, fuel consumption and emissions are measured with various values of both EGR and water mixing rate, The results show that NOx emission is reduced much rather and smoke is also reduced simultaneously.

  • PDF

Six Sigma 기법을 이용한 이중 스월 가스터빈 연소기의 튜닝시험 (Tuning Test of a Double-Swirl Gas Turbine Combustor using Six Sigma Tools)

  • 이민철;안광익;윤영빈
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.195-196
    • /
    • 2012
  • This paper describes combustion tuning methodology of double-swirl gas turbine combustor using six sigma tools. This methodology is consist of five steps-Define, Identify, Design, Optimize and Verify (DIDOV). First, the NOx reduction target was defined in the step design; second, the current status of the plant was diagnosed in the step of identify; third, the vital few control parameters to achieve the defined target were determined by analyzing the correlation between the control parameters and NOx emissions in the step of design; fourth, the optimum condition was derived from one of the six sigma tools in the step of optimize; finally, the optimum condition was verified by applying the condition to the gas turbine combustor in the step of verify. As a result of the suggested method, averaged NOx emissions were reduced by more than 70% and the standard deviation was improved by more than 60%. Thus, this methodology can be attributed to the efficient reduction of NOx emission with saving combustion tuning time.

  • PDF

가스터빈용 촉매 연소기를 위한 촉매-화염 복합 연소 특성연구;촉매버너 입구 형상의 영향 (Characteristics of Catalytically Supported Combustion for Gas Turbine Catalytic Combustor;Effects of the inlet shape of catalytic burner)

  • 이경원;정남조;유인수;조성준;서용석;강성규;송광섭;전광민
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
    • /
    • pp.71-79
    • /
    • 2002
  • The characteristics of the catalytically supported combustion with Pd and Pd/Pt based catalyst using the bench-scaled high pressure combustor have been investigated up to 5atm. This study aimed to investigate combustion characteristics of the stable flame attached to the exit of catalyst bed and NOx emissions with respect to the position of axial and radial direction in the combustor. NOx emissions were increased along the axial distance after the catalyst bed exit and radially decreased from the center to the wall of the combustor. At the higher pressure, the NOx emission decreased slightly due to the lower flame temperature in the combustor at the high pressure.

  • PDF

선박용 디젤기관의 연료분사 시기가 배기배출물 특성에 미치는 영향 (Effects of Fuel Injection Timing on Exhaust Emissions Characteristics in Marine Diesel Engine)

  • 임재근;최순열
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제26권3호
    • /
    • pp.307-312
    • /
    • 2002
  • A study on the exhaust emissions of marine diesel engine with various fuel injection timing is performed experimentally .In this paper, fuel injection timing is changed from BTDC $14^{\circ}$ to $20^{\circ}$ by $2^{\circ}$ intervals, the experiments are performed at engine speed 1800rpm and from load 0% to 100% by 25% intervals, and main measured parameters are fuel consumption rate, Soot, NOx, HC and CO emissions etc. The obtained conclusions are as follows (1) Specific fuel consumption is indicated the least value at BTDC $18^{\circ}$ of fuel injection timing and it is increased in case of leading the injection timing. (2) Soot emission is decreased in case of leading fuel injection timing and it is increased in the form of convex downwards with increasing the load. (3) NOx emission is increased in case of leading fuel injection timing and it is increased in the form of straight line nearly with increasing the load. (4) HC and CO emissions are decreased in case of leading fuel injection timing and they are changed in the form of convex downwards with increasing the load.

균질혼합압축점화기관에서 프로판과 부탄연료가 기관성능에 미치는 영향 (Influence of Propane and Butane on Engine Performance in a Homogeneous Charge Compression Ignition(HCCI) Engine)

  • 최경호;김지문;한성빈
    • 대한기계학회논문집B
    • /
    • 제29권3호
    • /
    • pp.417-423
    • /
    • 2005
  • This paper describes the engine performance of a Homogeneous Charge Compression Ignition(HCCI) engine according to Exhaust Gas Recirculation(EGR), cylinder-to-cylinder, fuel of propane and butane. HCCI engines are being considered as a future alternative for diesel and gasoline engines. HCCI engines have the potential for high efficiency, very low NOx emissions and very low particulate matter(PM). On experimental work, we have done an evaluation of operating conditions in a 4-cylinder compression engine. The engine has been run with propane and butane fuels at a constant speed of 1800rpm. This work is intended to investigate the HCCI operation of the engine in this configuration that has been modified from the base diesel engine. The performance and emissions of the engine are presented. In this paper, the start of combustion(SOC) is defined as the $50{\%}$ point of the peak rate of heat release. SOC is delayed slightly with increasing EGR. As expected, NOx emissions were very low for all EGR range and nbuned HC and CO emission levels were high. CO and HC emissions are lower with using propane than butane as fuels of HCCI engines.

고압/저압 EGR 공급 비율에 따른 디젤 엔진의 연소 및 배기 특성 (Combustion and Emissions Characteristics of a Diesel Engine with the Variation of the HP/LP EGR Proportion)

  • 박영수;배충식
    • 한국자동차공학회논문집
    • /
    • 제22권7호
    • /
    • pp.90-97
    • /
    • 2014
  • The effects of high pressure and low pressure exhaust gas recirculation (HP/LP EGR) portion on diesel engine combustion and emissions characteristics were investigated in a 2.2 L passenger-car diesel engine. The po3rtion of HP/LP EGR was varied from 0 to 1 while fixing the mass flow rate of fresh air. The intake manifold temperature was lowered with the increasing of the portion of LP EGR, which led to the retardation of heat release by pilot injection. The lowered intake manifold temperature also resulted in low nitrogen oxide (NOx) emissions due to decreased in-cylinder temperature and prolonged ignition delay, however, the carbon monoxide (CO) emission showed opposite trend to NOx emissions. The brake specific fuel consumption (BSFC) was decreased as the portion of LP EGR increased due to lowered exhaust manifold pressure by wider open of turbocharger vane. Consequently, the trade-off relationship between NOx and BSFC could be improved by increasing the LP EGR portion.

2.0 리터급 LPG 하이브리드 엔진 및 차량의 배출가스 및 연비성능 비교에 관한 연구 (A Study on the Comparison of Emissions and Fuel Efficiency Performance of 2.0 Liter LPG Hybrid Engine and Vehicle)

  • 권석주;구본석;강재훈;김강면;오세두;서영호
    • 한국분무공학회지
    • /
    • 제28권4호
    • /
    • pp.191-197
    • /
    • 2023
  • LPG direct injection (LPDi) technology is a method of improving the weaknesses of existing LPG vehicles by directly injection into the combustion chamber. This study was conducted on the comparison of emissions and fuel efficiency performance of the engine and vehicle by applying LPDi technology. The LPDi hybrid engine's maximum output and maximum torque were measured at an equivalent level of less than 1% compared to conventional gasoline fuel. The fuel amount was corrected using the LCU controller, and the THC, CO, and NOx emissions were reduced to 90% in the operating range of the three-way catalyst through air-fuel ratio control. The analysis of THC+NOx and CO emissions in FTP-75 (CVS-75) driving mode satisfied the US LEV III SULEV30 regulation.

인천항의 선박오염원에서 배출된 대기오염물질의 확산 (Dispersion of Air Pollutants from Ship Based Sources in Incheon Port)

  • 김광호;권병혁;김민성;이돈출
    • 해양환경안전학회지
    • /
    • 제23권5호
    • /
    • pp.488-496
    • /
    • 2017
  • 선박의 오염물질 배출에 대한 규제는 최근 IMO/MEPC(국제해사기구/해양환경보호위원회)를 통해서 진행 중이다. 선박오염원에서 배출된 오염물질은 국지적인 요인에 의해서 연안지역을 비롯하여 육지로 확산될 수 있다. 인천과 같이 선박 배출 오염물질에 노출되어 있는 항구 도시에서 선박오염원 조절은 연안지역의 대기질 관리정책을 효율적으로 고안하기 위해서 반드시 필요하다. 연안지역의 대기오염물질 중 선박에 의한 NOx와 SOx의 농도는 전체 NOx와 SOx 농도의 각각 14 %와 10 %를 차지한다(NIER, 2008). 연안도시지역의 대기질은 국지적인 순환에 의존하는 오염물질의 확산 경향과 선박의 수에 영향을 받는다. 선박오염원으로부터 배출된 오염물질의 확산을 WRF(Weather Research and Forecasting model)의 기상장을 기초로 CALPUFF(California Puff model)를 사용하여 분석하였다. 그리고 연안도시지역의 대기확산모델은 정박한 선박과 입 출항하는 선박으로 나누어 각각 점오염원과 선오염원으로 구분하여 모의하였다. 선박척수 82~84척을 기준으로 NOx의 총 평균 배출량은 입 출항시 각각 6.2 g/s, 6.8 g/s이었고, SOx의 총 평균 배출량은 입 출항시 각각 3.6 g/s, 5.1 g/s 이었다. 정박 중인 선박의 NOx와 SOx에 대한 총 평균 배출량은 각각 0.77 g/s, 1.93 g/s이었다. 육풍의 영향으로 인하여 인천항으로부터 내륙으로 진행되는 오염물질의 수송이 억제되었고, 내륙의 SOx와 NOx 농도가 일시적으로 감소하는 원인이 되었다. 해풍에 의해 NOx와 SOx가 내륙으로 확산되었고, 내륙의 NOx와 SOx의 농도가 점차 증가하였다. 인천항과 인접한 지역의 오염물질의 농도는 해륙풍의 영향보다 인천항에 정박 중인 선박오염원에 의한 영향이 더욱 크게 반영되었다. 본 연구는 연안도시지역의 대기질 정책고안과 배출기준을 정하는 것에 유용할 것으로 기대된다.

국내의 농업기계에 의해 배출되는 대기 오염 물질 분석 (Analysis of Air Pollutant Emissions from Agricultural Machinery in South Korea)

  • 신창섭;박두산;홍동혁;김태한
    • 한국기계가공학회지
    • /
    • 제18권3호
    • /
    • pp.14-25
    • /
    • 2019
  • From 2019 onwards, more stringent regulations (from Stage 4 to Stage 5) are to be implemented in Europe in order to reduce the air pollutant emissions. In South Korea, the government authorities started to make new regulation to meet the European regulation. As a first step, the air pollutant emissions such as CO, NOx, SOx, TSP, $PM_{10}$, $PM_{2.5}$, VOC, $NH_3$ by agricultural machinery were analyzed based on CAPSS inventory along with the analysis in the general aspect in this study. Three levels of analysis was conducted each in agricultural machinery aspect along with in the general aspect. Per agricultural tractor, all kinds of the air pollutant emissions decreased by 25, 25, 99, 25, 25, 25, 25% for the CO, NOx, SOx, TSP, $PM_{10}$, VOC, $NH_3$ emissions each from the year 2000 to the year 2014. Per combine harvester, all kinds of the air pollutant emissions decreased by 63, 63, 91, 63, 63, 63, 63% for the CO, NOx, SOx, TSP, $PM_{10}$, VOC, $NH_3$ emissions each from the year 2000 to the year 2014.