• Title/Summary/Keyword: NOx저감

Search Result 420, Processing Time 0.028 seconds

A Numerical Study for Effective Operation of MSW Incinerator for Waste of High Heating Value by the Addition of Moisture Air (함습공기를 이용한 고발열량 도시폐기물 소각로의 효율적 운전을 위한 수치 해석적 연구)

  • Shin, Mi-Soo;Shin, Na-Ra;Jang, Dong-Soon
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.2
    • /
    • pp.115-123
    • /
    • 2013
  • Stoker type incinerator is one of the most popular one used as municipal solid waste (MSW) incineration because, in general, it is quite suitable for large capacity and need no preprocessing facility. Nowadays, however, since the combustible portion of incoming MSW increases together with the decrease of the moisture content due to prohibition of directly burying food waste in landfill, the heating value of waste is remarkably increasing in comparison with the early stage of incinerator installation. Consequently, the increased heating value in incinerator operation causes a number of serious problems such as reduction of waste amount to be burned due to the boiler heat capacity together with the significant NO generation in high temperature environment. Therefore, in this study, a series of numerical simulation have been made as parameters of waste amount and the fraction of moisture in air stream in order to investigate optimal operating condition for the resolution of the problems associated with the high heating value of waste mentioned above. In specific, a detailed turbulent reaction flow field calculation with NO model was made for the full scale incinerator of D city. To this end, the injection method of moisturized air as oxidizer was intensively reviewed by the addition of moisture water amount from 10% and 20%. The calculation result, in general, showed that the reduction of maximum flame temperature appears consistently due to the combined effects of the increased specific heat of combustion air and vaporization heat by the addition of water moisture. As a consequence, the generation of NOx concentration was substantially reduced. Further, for the case of 20% moisture amount stream, the afterburner region is quite appropriate in temperature range for the operation of SNCR. This suggests the SNCR facility can be considered for reoperation. which is not in service at all due to the increased heating value of MSW.

Experimental Study on Energy Saving through FAN Airflow Control in the Generator Room of a 9200-ton Training Ship (9200톤급 실습선 발전기실 FAN 송풍유량 제어를 통한 선박에너지 절약에 관한 실험적 연구)

  • Moon-seok Choi;Chang-min Lee;Su-jeong Choe;Jae-jung Hur;Jae-Hyuk Choi
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.29 no.6
    • /
    • pp.697-703
    • /
    • 2023
  • As a part of the global industrial efforts to reduce environmental pollution owing to air pollution, regulations have been established by the International Maritime Organization (IMO). The IMO has implemented various regulations such as EEXI, EEDI, and CII to reduce air pollution emissions from ships. They are also promoting measures to decrease the power consumption in ships, aiming to conserve energy. Most of the power used in ships is consumed by electric motors. Among the motors installed on ships, the engine room blower that takes up a significant load, operates at a constant irrespective of demand. Therefore, energy savings can be expected through frequency control. In this study, we demonstrated the efficacy of energy savings by controlling the frequency of the electric motor of the generator blower that supplies combustion air to the generator's turbocharger. The system was modeled based on the output data of the turboharger outlet temperature in response to the blower frequency inpu. A PI control system was established to control the frequency with the target being the turbocharger outlet temperature. By maintaining the turbocharger design standard outlet temperature and controlling the blower frequency, we achieved an annual energy saving of 15,552kW in power consumption. The effectiveness of energy savings through frequency control of blower fans was verified during the summer (April to September) and winter (March to October) periods. Based on this, we achieved annual fuel cost savings of 6,091 thousand won and reduction of 8.5 tons of carbon dioxide, 2.4 kg of SOx, and 7.8 kg of NOx air pollutants on the training ship.

A Study of Co-Combustion Characteristics of North Korean Anthracite and Bituminous Coal in 2 MWe CFBC Power Plant (2 MWe 순환유동층 발전 플랜트에서 유연탄과 북한 무연탄 혼소시험 특성 연구)

  • Han, Keun-hee;Hyun, Ju-soo;Choi, Won-kil;Lee, Jong-seop
    • Korean Chemical Engineering Research
    • /
    • v.47 no.5
    • /
    • pp.580-586
    • /
    • 2009
  • In this study, co-combustion characteristics of Chinese bituminous coal and North Korean anthracite were investigated using a 2 MWe scale circulating fluidized bed power plant. At first, the combustion efficiency of bituminous coal of China and Australia as a function of excess air ratio and temperature were observed. The results showed that the combustion efficiency was influenced by particle size and volatile content of coal, the combustion efficiency of Chinese bituminous coal was over 99.5%. The unburned carbon particles from fly ash and bottom ash were a content 5~7% and 0.3%, respectively. The combustion efficiency with the mixture ratio 20% of bituminous coal and anthracite decreased over 5% because of the increase of entrained particles by a small average particle size of anthracite in the combustor. However, the outlet concentration of $SO_2$ and $NO_x$ was not changed remarkably. The concentrations of the typical air pollutants such as $NO_x$ and $SO_2$ were 200~250 ppm($O_2$ 6%), 100~320 ppm($O_2$ 6%) respectively. The outlet concentration of $NO_x$ was decreased to 30~65% with $NH_3$ supplying rate of 2~13 l/min in SCR process. The $SO_x$ removal efficiency was up to 70% by in-furnace desulfurization using limestone with Ca/S molar of approximately 6.5. With wet scrubbing using $Mg(OH)_2$ as absorbent, the $SO_x$ removal efficiency reached 100% under near pH 5.0 of scrubbing liquid.

A Study on the Cold Flow Characteristics of a Flue Gas Recirculation Burner with Both Outlets Opening (양쪽 출구가 트인 배기가스 재순환 버너의 냉간 유동 특성에 관한 연구)

  • Ha, Ji Soo
    • Journal of the Korean Institute of Gas
    • /
    • v.22 no.3
    • /
    • pp.7-12
    • /
    • 2018
  • Thermal NOx is generated in a high temperature environment in a combustion facilities. Exhaust gas recirculation method is widely used among various methods for reducing nitrogen oxides in combustion devices. In the present study, the computational fluid dynamic analysis was accomplished to elucidate the cold flow characteristics in the flue gas recirculation burner with both outlets opening. Because the reciculation pipes is installed toward the tangential direction, the swirling flow is formulated in the burner and the phenomenon of the reverse flow creation is detected at the center area of circular burner. We are confirmed that this is the similar trend with the burner with one side outlet closed. From the present study, it was seen that the recirculated inflow from both recirculated burner outlets increased by about 5% compared to the burner with one side outlet opening. At the outlet located at the exhaust gas recirculation pipe inlet(gas exit 1), the inlet flow was formed in the entire region. At the opposite outlet(gas exit 2), the total flow was discharged, but the center part of the burner was observed to have a reverse flow. The flow rate at the gas exit 2 was 3 ~ 5 times larger than the flow rate at the gas exit 1.

A Study for SCR Catalyst Reduction in Fast SCR Using Oxidation Catalyst (산화촉매를 이용한 Fast SCR에서의 SCR 촉매 저감 연구)

  • Lee, Jae Ok;Lee, Dae Hoon;Song, Young-Hoon;Oh, Dong-Kyu;Seo, Jung-Wook
    • Applied Chemistry for Engineering
    • /
    • v.24 no.3
    • /
    • pp.333-336
    • /
    • 2013
  • Experimental investigation to estimate the feasibility of fast selective catalytic reduction (SCR) or oxidation catalyst combined ammonia SCR system to abate NOx in low temperature condition ($150{\sim}250^{\circ}C$) is reported. Because the conversion of NO to $NO_2$ is pre-requisite of the fast SCR process, the effect of the amount of oxidation catalyst to NO conversion to $NO_2$ was tested. 37, 45 and 51% of conversion rates were obtained for the OCV of 563000, 375000 and 281000 h, respectively. $De-NO_x$ performance in the case of $NO_2/NO_x$ ratio of 45% showed the best result in all tested temperature conditions. Comparison of the fast SCR and standard SCR with the condition of $NO_2/NO_x$ ratio of 45%, $200{\sim}250^{\circ}C$ and space velocity of 10000~30000 h showed that the fast SCR does not show much difference according to the variance of space velocity. Also it was shown that using the fast SCR, the volume of SCR catalyst can be reduced less than half of the standard SCR condition by increasing space velocity without the loss of $De-NO_x$ performance.

Effect of fuel injection timing on the combustion and NOx emission characteristics in a single cylinder diesel engine applied with diesel fuel for naval vessel and biodiesel (함정용 디젤 연료와 바이오디젤 연료를 적용한 단기통 디젤엔진에서 연료분사시기가 연소 및 질소산화물 배출특성에 미치는 영향)

  • Lee, Hyungmin
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.38 no.6
    • /
    • pp.681-687
    • /
    • 2014
  • The objective of this work presented here was focused on analysis of in-cylinder combustion characteristic, engine performance, and nitrogen oxides emission characteristic from marine gas oil for propulsion diesel engine of naval vessels and biodiesel with fuel injection timing in a single cylinder diesel engine. In addition, combustion process was analyzed with a high speed camera of marine gas oil and biodiesel fuel. Retarding the fuel injection timing from $BTDC25^{\circ}CA$ to $BTDC5^{\circ}CA$, in cylinder peak combustion pressure was gradually decreased, however, engine torque showed a tendency to increase. The highest nitrogen oxides level was measured at $BTDC15^{\circ}CA$, they were reduced at retarded and advanced condition on the basis of $BTDC15^{\circ}CA$. Comparing with combustion process of marine gas oil and biodiesel fuel at $BTDC5^{\circ}CA$, self-ignition timing of biodiesel fuel included oxygen content was faster than marine gas oil, however, a cautious observation indicates a slightly higher flame intensity for marin gas oil than biodiesel as a diffusion flame is developing.

Bio-oil production from Chlorella sp. KR-1 using carbon dioxide from bubble column (기포탑에서 이산화탄소를 이용한 Chlorella sp. KR-1로부터 바이오오일 생산)

  • Lee, Ja-Youn;Seo, Kyoung-Ae;Park, Soon-Chul;Lee, Jin-Suk;Oh, You-Kwan
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.11a
    • /
    • pp.513-513
    • /
    • 2009
  • 최근 바이오디젤의 원료로 미세조류가 많은 관심을 끌고 있다. 미세조류는 물, 이산화탄소와 태양광을 이용해 광합성 성장이 가능하며, 지질(오일) 성분이 풍부하여 바이오디젤의 원료로 이용할 수 있다. 미세조류는 단위 면적당 오일 생산량이 곡물류의 50-100배 이상이며, 이산화탄소를 기질로 이용하므로 온실가스 직접 저감이 가능하다. 또한 배양시 비경작지나 황무지를 사용할 수 있으므로 기존 식용작물과 경쟁하지 않으며, 하수, 해수, 폐수 등 다양한 물자원을 이용할 수 있다. 본 연구에서는 고농도 $CO_2$에 내성을 지닌 Chlorella sp. KR-1을 대상으로 1 L 규모 기포탑 광생물반응기에서 균체 성장 및 지질(바이오오일) 합성에 대한 $CO_2$ 농도, 가스 공급속도, 질산염 농도 등 환경 및 영향 조건의 영향을 조사하였다. 가스 공급속도 0.4 L/min에서 $CO_2$ 농도를 0.03-20% 범위에서 조사하였을 때 최대 균체성장은 $CO_2$ 10%에서 관찰되었다. 균체내 지방산 함량은 $CO_2$ 농도 0.03%에서 가장 낮았고, 5-20% 범위에서는 $CO_2$ 농도 증가에 따라 감소하는 경향이 관찰되었다. 가스 공급속도를 0.2 L/min에서 0.8 L/min으로 증가시켰을 때 최대 균체농도는 0.6-0.8 L/min의 범위에서 관찰되었고, 생체내 최대 지방산 함량은 0.4 L/min에서 관찰되었다. Nitrate 농도 1-20 mM 범위에서 최종 균체농도는 nitrate 농도 증가에 따라 10mM까지 증가하였으나 그 이상에서는 증가하지 않았다. 반면 지방산 함량은 nitrate 농도 증가에 따라 감소하는 경향이 관찰되었다. 본 실험에서 얻은 최대 지방산 생산량은 1,100 mg/L이었으며, 주요 지방산은 C10:0(1.7%), C16:0(28.5%), C18:0(11%), C18:1n9c(25.9%), C18:2n6c(26.3%), C18:3n3(6.6%)이었다. 현재 100 L 규모 광생물반응기에서 석탄발전소 배가스($CO_2$ 12-15%, SOx 50ppm, NOx 100ppm)를 이용한 바이오오일 생산 실험이 진행 중이다.

  • PDF

A Study on the Uniform Mixing of Ammonia-Air with the Change of Ammonia Supply Device Shape in a De-NOx System (탈질설비에서 암모니아 혼합기의 형상에 따른 암모니아-공기 균일 혼합에 관한 연구)

  • Ha, Ji Soo
    • Journal of the Korean Institute of Gas
    • /
    • v.23 no.3
    • /
    • pp.20-26
    • /
    • 2019
  • Selective catalytic reduction(SCR) method is widely used among various methods for reducing nitrogen oxides in combustion devices of coal power plant. In the present study, the computational fluid dynamic analysis was accomplished to derive the optimal shape of ammonia-dilution air mixing device in a ammonia injection grid. The distribution characteristics of flow and $NH_3$ concentration had been elucidated for the reference shape of ammonia mixing device(Case 1). In the mixing device of Case 1, it could be seen that $NH_3$ distribution was shifted to the wall opposite to the inlet of the ammonia injection pipe. For the improvement of $NH_3$ distribution, the case(Case 2) with closing one upper injection hole and 4 side injection holes, the case(Case 3) with installing horizontal plate at the upper of ammonia injection pipe, the case(Case 4) with installing horizontal plate and horizontal arc plate at he upper of ammonia injection pipe were investigated by analyzing flow and $NH_3$ concentration distributions. From the present study, it was found that the % RMS of $NH_3$ for Case 4 was 4.92%, which was the smallest value among four cases, and the range of $R_{NH3}$ also has the optimally uniform distribution, -10.82~8.34%.

A Study on the Recirculation Flow Characteristics with the Change of Shape in a Flue Gas Recirculation Device using Coanda Nozzle (코안다 노즐을 이용한 배기가스 재순환 장치의 형상에 따른 재순환 유동 특성에 관한 연구)

  • Ha, Ji Soo;Shim, Sung Hun;Kim, Dae Yeon
    • Journal of the Korean Institute of Gas
    • /
    • v.23 no.3
    • /
    • pp.1-6
    • /
    • 2019
  • The purpose of the present study is to elucidate flue gas recirculation device for reduction of nitrogen oxides using coanda nozzle without adopting additional power driving fan in a waste incinerator. The characteristics of the exhaust gas recirculation flow rate and the average temperature change at the outlet of the mixed gas were investigated according to the change of air supply nozzle gap and the position of air supply nozzle. When the gap of the air supply nozzle was changed to 3.22, 4.03, and 4.84 mm, the largest recirculation flow ratio, which is the ratio of exhaust gas recirculation flow rate and air supply flow rate, was 2.227 for the case with 3.22 mm and its mean temperature at outlet was $594.8^{\circ}C$. When the position of the air supply nozzle changes to the front position, neck position, and expansion position of the coanda nozzle neck, the recirculation flow ratios at the forward position and the neck position were nearly almost the same value, 1.843, and 1.696 at the expansion position, their mean temperatures were $559.8^{\circ}C$ and $544.3^{\circ}C$, respectively.

대구지역 대기환경용량평가에 관한 연구

  • Choe, Geun-Sik;Kim, Hae-Dong
    • 한국지구과학회:학술대회논문집
    • /
    • 2010.04a
    • /
    • pp.90-91
    • /
    • 2010
  • 우리나라는 산업화와 도시화의 급속한 발전으로 인한 대기오염물질배출시설, 자동차 통행량, 에너지 사용량의 증가 등으로 대기오염물질배출원의 수와 규모가 증대되어 광역도시를 중심으로 대기질이 악화되고 있다. 특히 우리나라의 수도권대기질은 선진국의 주요 도시에 비해 대기오염 상태가 좋지 않은 것으로 평가됨에 따라 정부는 대기질을 OECD선진국 수준으로 개선한다는 목표를 세우고 있으나, 지역의 대기상태 및 그 동안의 대기질 개선을 위해 이행된 정책의 효율성 측면에서 볼 때 사후적인 규제위주의 농도규제 방식으로는 급증하는 대기오염배출시설의 배출량총량 관리가 어렵고, 지자체별로 개별적인 분산관리로는 광역적으로 이동되는 대기오염물질의 관리가 불가능하다. 또한 대기오염과 상관성이 큰 에너지정책, 산업정책, 도시계획 등 관련 정책과의 통합적 접근이 어렵기 때문에 사전에 이를 예방하는 총량관리가 요구되어 진다. 총량규제란 특정지역의 기상, 지형조건 등을 이용하여 대기환경용량을 산출하고 이를 기초로 지역별 배출허용총량을 할당하여 궁극적으로는 오염원별로 대상오염물질의 삭감량을 정하는 제도로 선진국에서는 대기환경용량을 바탕으로 1970년대부터 사업장을 중심으로 배출농도 규제와 함께 총량규제를 병행 실시하고 있으며, 최근에는 자동차에도 실시하고 있다. 우리나라에서도 대기환경보전법 제9조에서 환경기준을 초과하여 사람의 건강이나 재산, 동식물의 생육에 중대한 위해를 가져올 우려가 있다고 인정되는 경우에는 동 지역 또는 특별대책지역 중 사업장이 밀집되어 있는 구역에 대하여 배출되는 오염물질을 총량으로 규제할 수 있도록 규정하고 있다. 또한, 환경부는 2003년도에 서울, 인천, 경기도내 19개시 지역을 대상으로 대기오염물질의 배출총량을 관리하는 대기오염총량제 실시를 포함한 '수도권대기질개선에관한특별법'을 제정하였고, 현재는 사업장에게 연도별 배출허용총량을 할당하고, 할당량 이내로 오염물질을 배출하도록 관리하는 사업장 대기오염물질총량관리 제도로 시행 중에 있다. 그러나 수도권대기질개선특별대책을 수립하면서 총량관리의 본격 이행 및 배출권 거래제도 도입에 대한 특별법안이 제정되고 부분적으로 시행되고 있으나, 우리나라에 총량관리를 본격 이행하는데 있어서의 필요한 준비여건은 아직 초기 단계이고, 관련 연구의 수행실적 또한 수도권에 제한되어 적은 편이다. 따라서 현재는 총량관리가 수도권에 국한하여 실시되고 있으나, 점차 타 도시까지 광역적으로 확대될 것으로 예상되는 바 이에 필요한 제반 사항들에 대한 조사 분석을 통하여 정책방향을 설정하는 더 많은 연구가 필요할 것이다. 이러한 배경에서 본 연구에서는 대구지역을 대상으로 대기오염농도 및 대기오염물질 배출량에 대한 현황조사를 실시하고, 이를 토대로 고농도가 자주 발생되거나 그러할 가능성이 높은 $NO_X$을 대상으로 대기오염기여도를 평가하고 대기확산모델을 통한 대기환경용량을 산정하였다. 대기오염농도 현황을 살펴본 결과, 대구지역의 대기오염은 $NO_2$, $SO_2$, CO는 전형적인 1차오염물질의 변화경향을 보였으며, $PM_{10}$는 봄철에 황사의 영향을 크게 받는 것으로 나타나 실제 대구지역에서 배출되는 양을 추정하기 힘든 것으로 판단된다. 또한 $NO_2$는 공업, 상업지역에서 $SO_2$$PM_{10}$는 공업지역, CO는 상업지역, $O_3$은 교외지역에서 높은 농도를 나타내는 것으로 파악되었다. 대구지역의 대기오염물질 배출량 현황은 CO가 47%, NOX가 43%로 전체 배출량의 90%를 차지하였고, 2005년 이후 $NO_X$는 감소하고 $SO_X$가 증가하는 추세이다. 또한 배출원대분류 중도로 및 비도로이동오염원에서 발생되는 선 오염원이 75%로 대구지역에서 가장 크게 기여하는 것으로 나타났다. ISCST3 대기확산모델을 이용하여 대기환경용량을 산정하기위하여, 먼저 대구지역의 대기환경용량평가는 가시적인 위해성이 높고 개선정책이 용이한 $NO_X$을 대상물질로 선정하였고, 배출량과 오염농도간의 상관도가 0.659로 높은 것으로 판단되어, 배출량을 삭감하였을 때 대기오염농도의 개선이 명확히 나타나는 것을 알 수 있었다. 다음으로, 단위격자 당 한계배출율을 알아내는 작업을 실시하여, 대구지역을 동일하게 장기환경기준 80%수준인 22.4ppb를 만족시키기 위한 한계배출율은 2.23g/s가 필요한 것으로 파악되었고, 산출한 한계배출율을 이용하여 장기환경기준치 80%수준 달성을 목표로 하는 경우의 대기환경용량을 산정하고 실제 배출량과 비교 분석하였다. 그 결과, 대구지역 전체의 환경용량은 약 3만 톤으로 실제 배출량 2만2천 톤에 약 8천 톤 이상의 여유가 있는 것으로 파악되었다. 그러나 구역별로 상이한 차이를 보였으며, 이에 따른 구역별 개선정책이 필요할 것으로 사료된다. 대기환경용량을 파악한 후 단위격자 당 한계배출율을 초과하는 대상 지역을 추출하여 삭감한 결과 초과배출량의 80%를 삭감해야 대구지역 전체에서 50ppb이하 농도가 되는 것을 알 수 있었는데, 실제로 초과배출량의 80%를 삭감하는 것은 어려움이 있다고 판단되어, 대구지역을 동일한 %율로 삭감한 결과 30% 삭감했을 때 50ppb수준을 달성하였고, 50%삭감했을때 2007년 환경기준인 30ppb수준을 달성하였다. 또한 배출원대분류 중 기여율이 높은 도로와 비도로오염원을 50%삭감한 결과 도로이동오염원의 삭감만으로도 상당한 고 배출지역의 농도저감에 효과가 있는 것으로 파악되고, 비도로오염원을 포함하여 삭감하였을 때는 대구지역 전체에서 50ppb이하로 내려가는 것을 볼 수 있었다. 따라서 향후 총량규제의 실시에 맞추어 대구지역의 실제적인 환경용량의 정확한 파악과 고배출지역에 대한 삭감방법에 관한 더 많은 연구가 필요하다고 사료된다. 이 연구 결과는 앞으로 시행될 지역총량규제에 대한 기초적인 방법론으로 활용될 수 있을 것이다.

  • PDF