• Korean Journal of Soil Science and Fertilizer
• /
• 제38권4호
• /
• pp.222-229
• /
• 2005

A simplified one-dimensional model STELLA was used to predict soil water movement in lllinois corn fields using soil water balance sheets. It offered the potential to increase understanding of soil nitrate and agrochemical leaching process. The model accounted for aU possible annual inputs and outputs of water from a closed ecosystem as represented by corn fields. Water inputs included precipitation, while outputs included runoff, transpiration, evaporation and drainage. To run the model required daily inputs of two climatic data measurements such as daily precipitation and pan evaporation. Vertical water flow through the soil profile was calculated with first order equation including the difference in hydraulic conductivity and matric potential at the various soil types. The output results included daily changes of water content in the soil layers and daily amount of water losses including run-off, percolation, transpiration. This model was verified using Illinois corn field data for the soil water content measured by neutron scattering methods through 1992 to 1994 growing seasons. Approximately 22 to 78% of simulated water contents agreed with the measured values and their standard deviation, depending on soil types, whereas 30 to 70% of simulated water values agreed with the measured values and their standard deviations depending on soil layers.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제18권6호
• /
• pp.455-463
• /
• 1998

RCCA(rod cluster control assembly) End-Tip suffers from neutron irradiation and constant vibration due to high-speed internal flow of primary coolant during plant operation. Such operating conditions cause the RCCA end-tip crackings around tile circumferential weldment of the end-tip, and in some cases, the defective end-tips were completly broken loose. However, no reliable inspection techniques for end-tip crackings were developed in the past, although some techniques exist for inspecting RCCA control rod wears. Therefore, NDE group at KEPRI has developed an ECT technique for the detection and the sizing of the end-tip crackings. The technique uses a specially designed surface-riding probe that can detect size of circumferential crackings with an accuracy of ${\pm}5.31%$ RMS error. This paper describes the ECT instrumentation including the ECT probes, calibration bars, as well as technical approaches.

• Journal of Nutrition and Health
• /
• 제51권1호
• /
• pp.40-49
• /
• 2018

Purpose: The number of patients with dyslipidemia have been increasing steadily over the past few decades in South Korea. The association between the chromium level and chronic disease has attracted considerable interest, but few studies have been conducted on the Korean population. The aim of this study was to identify the dietary and non-dietary correlates of the toenail chromium level, and evaluate the association between the toenail chromium level and dyslipidemia. Methods: The baseline data of an ongoing prospective cohort study in Yeungnam area in South Korea were analyzed. A total of 500 participants aged 35 years or older who completed questionnaires on their demographics, lifestyle characteristics, and medical information were included. The toenail chromium level was analyzed by neutron activation analysis. The dietary intake was assessed using a validated 146-item semi-quantitative food frequency questionnaire. The blood lipid profiles were obtained from medical examinations conducted by the Korean National Health Insurance Service or medical institutions. Results: Higher chromium levels were associated with the residential area (urban), higher education level, higher intakes of noodles and vegetables, and lower intake of fruits. Multiple logistic regression analysis showed that the toenail chromium levels were not associated significantly with the prevalence of dyslipidemia (odds ratio: 0.99, 95% confidence interval: 0.61 ~ 1.60). Conclusion: This study is the first study in Korea to determine the independent correlates of the toenail chromium levels and the association between chromium exposure and dyslipidemia. These findings provide useful scientific evidence for the development of chromium intake guidelines for the Korean population.

• Journal of Radiation Protection and Research
• /
• 제13권2호
• /
• pp.9-20
• /
• 1988

In order to quantify the contribution of cosmic-ray ionizing component to the dose given by natural background radiation, a series of measurement has been carried out using LiF TLDs for about one and a half years on quarterly basis. Three different types of LiF TLDs namely, chips and PTFE based disks of $^{7}LiF$, and the same disks of $^{6}LiF$ for identifying possible contribution of neutron component were used. Measurements were made by placing badge-incased TLDs in a lead castle of 10 to 15cm thick installed in a room on the third floor of a four-story building in CNU Daedeok campus for 5 cycles of 90 days. For comparison a series of spectrometric study was also performed for the energy region over 3MeV using a 3'${\phi}\;{\times}\;3$'NaI(Tl) scintillation detector in association with an MCA of 1024 channels, and it was found that the data obtained by the TLDs placed in the lead castle indicate 75% of the dose given by outdoor cosmic-ray component. The results obtained by the TLDs through correction for shielding loss show that the outdoor dose contribution of ionizing component of cosmic rays at this campus is $34.3{\pm}1.1nGy/h$ which satisfactorily agrees with that expected for our particular location of measurement.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권2호
• /
• pp.129-140
• /
• 2018

A residual stress generated in the steel structure is broadly categorized into initial residual stress during manufacturing steel material, welding residual stress caused by welding, and heat treatment residual stress by heat treatment. Initial residual stresses induced during the manufacturing process is combined with welding residual stress or heat treatment residual stress, and remained as a final residual stress. Because such final residual stress affects the safety and strength of the structure, it is of utmost importance to measure or predict the magnitude of residual stress, and to apply this point on the design of the structure. In this study, the initial residual stress of steel structures having thicknesses of 25 mm and 70 mm during manufacturing was measured in order to investigate initial residual stress (hereinafter, referred to as initial stress). In addition, thermal elastic plastic FEM analysis was performed with this initial condition, and the effect of initial stress on the welding residual stress was investigated. Further, the reliability of the FE analysis result, considering the initial stress and welding residual stress for the steel structures having two thicknesses, was validated by comparing it with the measured results. In the vicinity of the weld joint, the initial stress is released and finally controlled by the weld residual stress. On the other hand, the farther away from the weld joint, the greater the influence of the initial stress. The range in which the initial stress affects the weld residual stress was not changed by the initial stress. However, in the region where the initial stress occurs in the compressive stress, the magnitude of the weld residual compressive stress varies with the compression or tension of the initial stress. The effect of initial stress on the maximum compression residual stress was far larger when initial stress was considered in case of a thickness of 25 mm with a value of 180 MPa, while in case of thickness at 70 mm, it was 200 MPa. The increase in compressive residual stress is almost the same as the initial stress. However, if initial stress was tensile, there was no significant change in the maximum compression residual stress.

• Analytical Science and Technology
• /
• 제35권5호
• /
• pp.205-211
• /
• 2022

Deuterium (D) is an isotope with one more neutron number than hydrogen (H). Heavy elements rarely change their chemical properties with little effect even if the number of neutrons increases, but low-mass elements change their vibration energy, diffusion rate, and reaction rate because the effect cannot be ignored, which is called an isotope effect. Recently, in the semiconductor and display industries, there is a trend to replace hydrogen gas (H₂) with deuterium gas (D₂) in order to improve process stability and product quality by using the isotope effect. In addition, as the demand for D₂ in industries increases, domestic gas producers are making efforts to produce and supply D₂ on their own. In the case of high purity D₂, most of them are produced by electrolysis of heavy water (D₂O), and among D₂, hydrogen deuteride (HD) molecules are present as isotope impurities. Therefore, in order to maximize the isotope effect of hydrogen in the electronic industry, HD, which is an isotope impurity of D₂ used in the process, should be small amount. To this end, purity analysis of D₂ for industrial processing is essential. In this study, HD quantitative analysis of D₂ for high purity D₂ purity analysis was established and hydrogen isotope RM (Reference material) was developed. Since hydrogen isotopes are difficult to analyze with general gas analysis instrument, they were analyzed using a high-precision mass spectrometer (Gas/MS, Finnigan MAT271). High purity HD gas was injected into Gas/MS, sensitivity was determined by a signal according to pressure, and HD concentrations in two bottles of D₂ were quantified using the corresponding sensitivity. The amount fraction of HD in each D₂ was (4518 ± 275) μmol/mol, (2282 ± 144) μmol/mol. D₂, which quantifies HD amount using the developed quantitative analysis method, will be manufactured with hydrogen isotope RM and distributed for quality management and maintenance of electronic industries and gas producers in the future.

• Journal of Space Technology and Applications
• /
• 제1권2호
• /
• pp.160-177
• /
• 2021

The Solar and Space Environment Division of the Korean Space Science Society investigated the use and possession of ground and satellite observations and models of solar and planetary data operated by domestic research institutes and universities. Based on the findings, we would like to introduce observational instruments, data, and models in solar and interplanetary fields in this paper to improve understanding and use of each data and explore opportunities for interdisciplinary research. The ground and satellite observations, which require a lot of investment, were mainly held by research institutes (National Meteorological Satellite Center, Polar Research Institute, Korean Space Weather, Korea Astronomy and Space Science Institute and KAIST Satellite Research Institute), and model development was overwhelmingly carried out at Kyung Hee University. In solar and interplanetary fields, we introduce Fast Imaging Solar Spectrograph (FISS), neutron monitors, and the analysis models [for the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA) and Hinode/X-Ray Telescope (XRT) observations] in nonequilibrium ionization state as representatives. Survey on solar and interplanetary fields can be downloaded from the website of the Korean Space Science Society (http://ksss.or.kr/). The paper makes know the importance of long-term and continuous management of space science-related materials, and hopes to contribute to enhancing the status of domestic space science data by utilizing locally produced data by various personnel participating in space science research.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4274-4281
• /
• 2023

Blanket is of vital importance for engineering application of the fusion reactor. Nuclear heat deposition in materials is the main heat source in blanket structure. In this paper, the three-dimensional method for thermal-hydraulics/neutronics coupling analysis is developed and applied for the full-scale module of the helium-cooled ceramic breeder tritium breeding blanket (HCCB TBB) designed for China Fusion Engineering Test Reactor (CFETR). The explicit coupling scheme is used to support data transfer for coupling analysis based on cell-to-cell mapping method. The coupling algorithm is realized by the user-defined function compiled in Fluent. The three-dimensional model is established, and then the coupling analysis is performed using the paralleled Coupling Analysis of Thermal-hydraulics and Neutronics Interface Code (CATNIC). The results reveal the relatively small influence of the coupling analysis compared to the traditional method using the radial fitting function of internal heat source. However, the coupling analysis method is quite important considering the nonuniform distribution of the neutron wall loading (NWL) along the poloidal direction. Finally, the structure optimization of the blanket is carried out using the coupling method to satisfy the thermal requirement of all materials. The nonlinear effect between thermal-hydraulics and neutronics is found during the blanket structure optimization, and the tritium production performance is slightly reduced after optimization. Such an adverse effect should be thoroughly evaluated in the future work.

• Nuclear Engineering and Technology
• /
• 제55권12호
• /
• pp.4447-4464
• /
• 2023

This paper focuses on the development of a new computational model of the CNESTEN's TRIGA Mark II research reactor using the 3D continuous energy Monte-Carlo code TRIPOLI-4 (T4). This new model was developed to assess neutronic simulations and determine quantities of interest such as kinetic parameters of the reactor, control rods worth, power peaking factors and neutron flux distributions. This model is also a key tool used to accurately design new experiments in the TRIGA reactor, to analyze these experiments and to carry out sensitivity and uncertainty studies. The geometry and materials data, as part of the MCNP reference model, were used to build the T4 model. In this regard, the differences between the two models are mainly due to mathematical approaches of both codes. Indeed, the study presented in this article is divided into two parts: the first part deals with the development and the validation of the T4 model. The results obtained with the T4 model were compared to the existing MCNP reference model and to the experimental results from the Final Safety Analysis Report (FSAR). Different core configurations were investigated via simulations to test the computational model reliability in predicting the physical parameters of the reactor. As a fairly good agreement among the results was deduced, it seems reasonable to assume that the T4 model can accurately reproduce the MCNP calculated values. The second part of this study is devoted to the sensitivity and uncertainty (S/U) studies that were carried out to quantify the nuclear data uncertainty in the multiplication factor k_eff. For that purpose, the T4 model was used to calculate the sensitivity profiles of the k_eff to the nuclear data. The integrated-sensitivities were compared to the results obtained from the previous works that were carried out with MCNP and SCALE-6.2 simulation tools and differences of less than 5% were obtained for most of these quantities except for the C-graphite sensitivities. Moreover, the nuclear data uncertainties in the k_eff were derived using the COMAC-V2.1 covariance matrices library and the calculated sensitivities. The results have shown that the total nuclear data uncertainty in the k_eff is around 585 pcm using the COMAC-V2.1. This study also demonstrates that the contribution of zirconium isotopes to the nuclear data uncertainty in the k_eff is not negligible and should be taken into account when performing S/U analysis.

• Journal of Nutrition and Health
• /
• 제43권5호
• /
• pp.524-532
• /
• 2010

The Na, component of salt, can increase the risk of high blood pressure and hypertension. Especially, children are exposed to an increased risk of high sodium intake, because they often consume Na-rich processed foods and commercially prepared foods in the street. However, the database for the sodium and chloride content for these children's favorite foods is insufficient. In this study, the Na and Cl contents in 89 children's favorite foods were analyzed by using Instrumental Neutron Activation Analysis (INAA) method. The analyzed food items were presented after being classified into 33 kinds of food groups. The Na contents in 100 g children's favorite foods ranged from 0.3 mg to 35.1mg in fruits, 28.9mg to 82.5mg in milks, 127.2 mg to 602.2 mg in breads, cakes, sandwiches, and rice cakes, 2.5 mg to 1169.9 mg in candies, cookies and ice creams, 226.9 mg to 693.7 mg in commercially prepared street foods, and 103.4 mg to 875.8 mg in fast foods of westernized restaurant. Among children's favorite food groups, 100 g fried chicken, hotdog, burgers, and donuts contained an average Na of 536 mg, 553 mg, 794 mg, and 562.2 mg, respectively, so they are classified as 'high Na foods'. In contrast, 100 g fruits and dairy products contained Na an average 4.9 mg and 43.4 mg, respectively, being classified as 'low Na foods'. One serving of ramen, mandu noodle, and burger pizza can supply over 667mg Na, which is one third of the KDRI targeted intake. Likewise, the Cl contents in children's favorite foods were diverse according to food groups. The Cl contents in the analyzed foods differed from the 1.5 times of Na content, which is assumed in general. This study showed that the Na and Cl contents in children's favorite foods are very diverse. Conclusively, a strategy to reduce Na contents in the fast foods such as noodles and westernized restaurant foods is necessary for children health.