• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.787-792
• /
• 2004

본 논문에서는 근거리무선 통신용 RF 모듈을 구성하는 핵심 부품인 5.5GHz 대역의 발진기를 설계 제작하였다. NEC사의 잡음 특성이 우수한 HJ FET인 NE3210S01를 사용하여 위상잡음 특성을 개선하였고, 구현된 회로는 HP사의 회로 시뮬레이터인 ADS2002를 사용하여 설계 및 제작하였으며 발진기의 특성을 측정한 결과, 중심 주파수 5.5 GHz에서 출력전력이 10 dBm 그리고 2차 고조파 억압이 -31 dBc이며 중심 주파수 100 kHz offset에서 -98.83 dBc의 위상잡음 특성을 얻었다. 제작된 발진기는 근거리 무선 통신용 국부 발진기로 이용될 수 있다.

• Journal of Biosystems Engineering
• /
• 제10권2호
• /
• pp.19-26
• /
• 1985

This study was carried out to develop a versatile data acquisition/processing system for overall tractor performance utilizing a NEC PC-8001 microcomputer. The data acquisition system measures drawbar pull and power, wheel torque and axle power, ground speed, wheel slip, fuel flow, and engine speed. The system stores hexadecimal data for these variables in memory. Upon completion of each test run, all hexadecimal data stored in memory are recorded on floppy disc. The data processing system reads in the data collected on floppy disc and interprete them using several graphical and statistical techniques. The system uses the same microcomputer and a dot-matrix printer. The data acquisition system has been installed on a GOLDSTAR 500 tractor (2WD, 50 ps). A field study has shown that tractor performance data can be quickly and easily collected. It also appeared that the data processing system can be used to efficiently analyze the collected data. The data acquisition system has some troublesome in mounting and handling on tractor since it uses a general-purpose computer consisting of several components.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.96-100
• /
• 2004

본 논문에서는 근거리무선 통신용 RF 모들을 구성하는 핵심 부품인 5.5GHz 대역의 발진기를 설계 제작하였다. NEC사의 잡음 특성이 우수한 HJ FET인 NE3210S01를 사용하여 위상잡음 특성을 개선하였고, 구현된 회로는 HP사의 회로 시뮬레이터인 ADS2002를 사용하여 설계 및 제작하였으며 발진기의 특성을 측정한 결과, 중심 주파수 5.5 GHz에서 출력전력이 10 ㏈m 그리고 2차 고조파 억압이 -31 ㏈c이며 중심 주파수 100 KHz offset에서 -98.83 ㏈c의 위상잡음 특성을 얻었다. 제작된 발진기는 근거리 무선 통신용 국부 발진기로 이용될 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.248-252
• /
• 1998

The ACE Engineering, Inc. (ACE) of Seoul, Korea and The Energy Systems Institute (SEI) of Irkutsk, Russia has extensively studied the formation of an interconnected electric power systems throughout the North Eastern Asia Region(NEAR). The region encompasses East Siberia (ESR), Far East of Russia(FER), North East China(NEC), Mongolia(MON), North Korea(NKOR), South Korea(SKOR). Although geographically adjacent to each other, these countries and territories have different levels and rates of economic development, possess different reserves of energy resources which complement each other and hence, can interact to their mutual benefits. This Project is called Peace Network Project (PNP) because it seems to contribute for development of power economy and clean environment. In a word, the PEACE Network is expected to serve as "Power Economy And Clean Environment Network" and to promote the international cooperation. to expedite the peaceful reunification of North & South Korea and to revive the Korean culture in the North, and eventually contribute to the human prosperity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4456-4475
• /
• 2021

The system for re-identifying persons is used to find and verify the persons crossing through different spots using various cameras. Much research has been done to re-identify the person by utilising features with deep-learned or hand-crafted information. Deep learning techniques segregate and analyse the features of their layers in various forms, and the output is complex feature vectors. This paper proposes a distinctive framework called Integrated Level Feature Pattern (ILFP) framework, which integrates local and global features. A new deep learning architecture named modified XceptionNet (m-XceptionNet) is also proposed in this work, which extracts the global features effectively with lesser complexity. The proposed framework gives better performance in Rank1 metric for Market1501 (96.15%), CUHK03 (82.29%) and the newly created NEC01 (96.66%) datasets than the existing works. The mean Average Precision (mAP) calculated using the proposed framework gives 92%, 85% and 98%, respectively, for the same datasets.

• 적정기술학회지
• /
• 제5권1호
• /
• pp.8-17
• /
• 2019

Solar pumps, for water lift systems, is becoming popular in rural areas for supplying drinking water in dry seasons when its need is elevated. The development in technology has also made solar pumps readily available and cheap which has increased its demands. So, for scattered settlements having a limited budget for operation and maintenance costs, solar pump is preferred over grid connected electrical pumping systems. This primary objective of the study was to design a solar photovoltaic pumping drinking water supply system for a small health post which is about 45 km east from Kathmandu, the capital city of Nepal. The study also compared and verified the final design with the system's existing design prepared by a development agency. The water source for this study was a confined aquifer 115m below the surface. The water demand was calculated to be 11m³ per day. A 1500 kPa submersible pump attached to a motor was selected and installed. Along with that twelve solar panels, reservoir, transmission main and distribution main was designed. The outcomes conclude solar photovoltaic pumping water supply systems to be cost-effective with an estimated cost of only USD 0.84 million per MLD. Solar pumps require low maintenance and operation costs and its repairs can quickly be done by the local people. The study also shows that solar technology produces no sound, needs no fuel making it environmentally friendly.

• 치과방사선
• /
• 제22권2호
• /
• pp.273-282
• /
• 1992

The purpose of this study was to propose the utility which was evaluated the digital image processing and clinical application of the videodensitomery. The experiments were performed with IBM-PC/16bit-AT compatible, video camera(CCdtr55, Sony Co., Japan), an color monitor(MultiSync 3D, NEC, Japan) providing the resolution of 512×480 and 64 levels of gray. Sylvia Image Capture Board for the ADC(analog to digital converter) was used, composed of digitized image from digital signal and the radiographic density was measured by 256 level of gray. The periapical radiograph(Ektaspeed EP-21, Kodak Co., U. S. A) which was radiographed dried human mandible by exposure condition of 70 kVp and 48 impulses, was used for primary X-ray detector. And them evaluated for digitzed image by low and high pass filtering, correlations between aluminum equivalent values and the thickness of aluminum step wedge, aluminum equivalent values of sound enamel, dentin, and alveolar bone, the range of diffuse density for gray level ranging from 0 to 255. The obtained results were as follows: 1. The edge between aluminum steps of digitized image were somewhat blurred by low pass filtering, but edge enhancement could be resulted by high pass filtering. Expecially, edge enhancement between distal root of lower left 2nd molar and alveolar lamina dura was observed. 2. The correlation between aluminum equivalent values and the thickness of aluminum step wedge was intimated, yielding the coefficient of correlation r=0.9997(p<0.00l), the regression line was described by Y=0.9699X+0.456, and coefficient of variation amounting to 1.5%. 3. The aluminum equivalent values of sound enamel, dentin, and alvolar bone were 15.41㎜, 12.48㎜, 10.35㎜, respectively. 4. The range of diffuse density for gray level ranging from 0 to 255 was wider enough than that of photodenstiometer to be within the range of 1-4.9.

• 대한치과교정학회지
• /
• 제17권2호
• /
• pp.255-277
• /
• 1987

부정교합(不正交合)의 발생요인(發生要因)의 하나로서 비인두강(鼻咽頭腔)의 협착(狹窄)이 거론(擧論)되어 왔다 본(本) 연구(硏究)는 안면골격(顔面骨格)의 형태결정(形態決定)에 비인두강(鼻咽頭腔)의 기여정도(寄與程度)를 파악(把握)하고자 함에 있다 연구자료(硏究資料) 및 방법안(方法安) 한국인(韓國人) 성인(成人) 남녀(男女) 156 명(名)의 측모두부X선규격사진(側貌頭部X線規格寫眞)을 사용(使用)하여 NEC PC-9801 VM2 Personal Computer와 Oscon GT-4000 Digitizer에 의한 data 입력(入力)을 행(行)한 후 통계처리(統計處理)를 행(行)하였다 통계처리(統計處理)로서는 각계측치(各計測値)에 대하여 남녀별(男女別)로 평균치(平均値), 표준편차치(標準偏差値)를 산출(算出), Student's t-test를 행(行)하고, 비인두강(鼻咽頭腔) 계측항목(計測項目)과 안면골격(顔面骨格)의 각(各) 계측치간(計測値間)의 상관관계(相關關係)의 검토(檢討)를 행(行)하였다 결(結) 과(果) 1 남녀(男女)의 성차(性差)로서, 여자(女子)보다 남자(男子)가 상악골(上顎骨)에 대해 하악골(下顎骨)이 돌출(突出)되어 있었으며, 안면고(顔面高)가 컸다 2 Ba-S-PNS와 S-PNS-Ba간(間)에 부(負)의 상관(相關)이 인정(認定)되어, 이 두 계측치간(計測値間)애 상호작용(相互作用)이 있는 것으로 판단 되었다 3 비인두강(鼻咽頭腔)의 깊이는 하악(下顎)의 전후위치관계(前後位置關係)와 유의(留意)한 상관관계(相關關係)를 보였다 4 비인두강(鼻咽頭腔)의 깊이와 안면(顔面)의 깊이와는 관련성(關聯性)이 없는 것으로 판단 되었다 5 비인두강(鼻咽頭腔)의 깊이와 안면고간(顔面高間)에 유의(有意)한 부(負)의 상관(相關)이 시사(示唆)되었다 6 비인두강(鼻咽頭腔)의 고경(高經)과 안면고간(顔面高間)에 유의(有意)한 상관관계(相關關係)가 인정(認定)되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.218-223
• /
• 1993

In this paper, we present a full digital control scheme which controls currents and speed of the permanent magnet AC servo motor with large range of bandwidth and high performance. The current equations of the permanent magnet AC servo motor are linearized by feedback linearization technique. Both acceleration feedforward terms and IP controllers, whose gains are functions of motor speed, are used in order to control motor currents. In addition the phase delays in current control loops are compensated by placing phase lead-lag compensators after current commands, which make it possible to avoid high gains in the current controllers. Unity power factor can be achieved by the proposed current controller. Pulsewidth modulation is performed by way of the well-known comparison with a triangular carrier signals. The velocity controller is designed on the basis of the linearized model of the permanent magnet AC servo motor by the proposed current controller. The performance of the entire control system is analyzed in the presence of uncertainty in the motor parameters. The proposed control scheme is implemented using the digital signal processor-based controller composed of an Analog Device ADSP 2111 and a NEC78310. The pulsewidth modulation (PWM) signals are generated through a custom IC, SAMSUNG-PWM1, which has the outputs of current controllers as input. The experimental results show that the permanent magnet AC servo motor can be always driven with high dynamic performance by the proposed full digital control scheme of motor speed and motor current.

• 대한한의학회지
• /
• 제27권2호
• /
• pp.244-252
• /
• 2006

Objectives : To examine any potential relationships between the types of alopecia and the facial heat distribution in patients with alopecia. Methods : 183 patients with alopecia participated in this study to provide facial heat distribution measured by the Infrared Thermography Scanner (ITS, Nec San-ei Instruments Ltd, Japan). The thermography scan was used in a light- and heat-protected room after 20 minutes' of rest. 1.5m of distance was maintained between the patients and the scanner. Results : Specificity in the type of facial heat distribution was found as follow. 1. Types of facial heat distribution can be classified as T-type and diffused patterns. 2. There was a significant difference in the pattern of facial heat distribution among different types of alopecia (p=0.002): facial heat distribution appeared T-type in androgenic alopecia, alopecia areata, and telogen effluvium (71.3%, 85.7%, 70.4%), whereas diffused pattern was dominant in seborrheic alopecia (55.6%). 3. There was a significant difference in the pattern of facial heat distribution between men and women (p<0.001) : While the T-type and diffused type appeared equally in men (50.6% : 49.4%), T-type was dominant in women (88.0% vs. 12.0%). Conclusions : We conclude that the pattern of facial heat distribution differs depending on the types of alopecia and gender. These differences may provide useful information for diagnosis and clinical therapy for this population.