• 한국의상디자인학회지
• /
• 제23권1호
• /
• pp.113-127
• /
• 2021

This study aims to analyze the style of men's suits and extract expressional words for the development of semantic differential scales of visual images according to the change in silhouette. Research methods are literature studies, case studies, and questionnaires. The stimuli were created using CLO 3D, a virtual sewing CAD. This study's results are as follows: 1) The British suit jacket has an angled shoulder line using thin pads, and a slightly higher waistline. The pants of the suit have a high waistline and two pleats, so the thighs of the pants are wide. The American suit jacket has a natural shoulder line, and the waistline is not emphasized. The width of the jacket is relaxed, and the length is long. The pants of the suit have a higher waistline, and the pants are wide as well. The Italian suit jacket has wide shoulders, and the waistline is connected lower with a soft curve, and the length is relatively short. The trousers of the suit are tapered and get narrower as it goes down to the hem. 2) Because it originated in the practices of true bespoke tailoring, traditional British suits have a far more 'fitted' silhouette than the mass-produced styles that became emblematic of the American style. By the late 1950s, a sack-style suit was standard American business attire. This technique gives the sack suit its characteristically 'boxy' silhouette. The "Continental" presented a highly tailored silhouette, with padded shoulders, a slim, tight-fitting chest, and a closely tapered waist. The story was that Italian culture valued aesthetics over all else and thus sought the 'slim' suit style as much as possible. 3) The main expressional words of visual images for men's suits differ greatly depending on the silhouette of suit. The visual images are ranked in the order of 'neat', 'classic', 'educated', 'hard', 'mature', for fitted silhouettes. The words of 'masculine', 'basic', 'comfortable', 'simple', 'mature', 'conservative', 'modern', are ranked for boxy silhouettes. And the words of 'slim', 'young', 'neat', are noted for slim silhouettes.

• Transactions on Electrical and Electronic Materials
• /
• 제13권5호
• /
• pp.252-255
• /
• 2012

In order to characterize insulation properties of epoxy/micro-silica/nano-silicate composite (EMNC), long-term and short-term AC treeing tests were carried out undr non-uniform electric field generated between needle-plate electrodes. In a long-term test, a 10 kV (60 Hz) electrical field was applied to the specimen positioned between the electrodes with a distance of 2.7 mm in an insulating oil bath at $30^{\circ}C$, and a typical branch type electrical tree was observed in the neat epoxy resin and breakdown took place at 1,042 min after applying the 10 kVelectrical field. Meanwhile, the spherical tree with the tree length of $237{\mu}m$ was seen in EMNC-65-0.3 at 52,380 min (36.4 day) and then the test was stopped because the tree propagation rate was too low. In the short-term test, an electrial field was applied to a 3.5 mm-thick specimen at an increasing voltage rate of 0.5 kV/s until breakdown in insulating oil bath at $30^{\circ}C$ and $130^{\circ}C$, and the data was estimated by Weibull statistical analysis. The electrical insulation breakdown strength for neat epoxy resin was 1,763 kV/mm at $30^{\circ}C$, while that for EMNC-65-0.3 was 2,604 kV/mm, which was a modified value of 47%. As was expected, the breakdown strength decreased at higher test temperatures.

• 분석과학
• /
• 제9권3호
• /
• pp.292-301
• /
• 1996

산화환원반응 탐침제로, poly ether 꼬리가 결합된 Cobalt(II)bipyridine 착물을 합성 하였고, 이들 화합물의 느린 확산계수와 불균일 전자이동을 설명하였다. $Co(bpy(ppgm)_2)_{3^-}(ClO_4)_2$에 전해질 $LiClO_4$가 혼합된 neat 상태의 산화반응에 대한 확산계수는 $1.5{\times}10^{-15}cm^2/s$ 였다. 이 화합물들의 불균일 전자이동 속도상수들은 확산계수와 관련이 있었다. 확산계수의 감소에 따라 속도상수(k)의 감소가 일어났다. 강한 이온쌍을 형성하는 $ClO{_4}^-$의 화합물은 약한 이온 쌍을 형성하는 $CF_3COO^-$ 화합물보다 확산계수가 훨씬 작았다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.260-263
• /
• 2015

Epoxy/micro-sized alumina composite was prepared and the effects of alumina content on the electrical and mechanical properties were investigated in order to develop an insulation material for gas insulated switchgear (GIS). Nano-sized alumina (average particle size: 30 μm) was also incorporated into the epoxy/micro-sized alumina composite. An electrical insulation breakdown strength test was carried out in sphere-sphere electrodes and the data were estimated by Weibull statistical analysis. Tensile strength was measured at a crosshead speed of 10 mm/min using a universal testing machine. Alumina content was varied from 0 wt% to 70 wt%.). As micro-sized alumina content increased, insulation breakdown strength increased until 40 wt% alumina content and decreased after that content. The tensile strength of a neat epoxy system was 82.2 MPa and that value for 60 wt% alumina content was 91.8 MPa, which was 111.7% higher than inthe neat epoxy system. The insulation breakdown strength of micro-sized alumina (60 wt%)/nano-sized alumina (1 phr) glycerol diglycidyl ether (GDE) (1 phr) composite was 54.2 MPa, which was 116% higher than the strength of the system without nano-sized alumina.

• Composites Research
• /
• 제33권1호
• /
• pp.19-24
• /
• 2020

본 연구에서는 Poly(vinylidene fluoride) (PVDF) 필름 제작 과정 중 마이크로웨이브 처리 과정을 도입하여 β 결정성 향상에 어떠한 영향을 미치는지 분석하였다. 또한, 나노 입자 보강제로써 금속산화물인 TiO₂를 혼합하여 PVDF 복합재료 필름을 만들어, 전기적 음성도 차이로 인한 반데르발스 힘을 통해 β 결정 형성을 추가적으로 향상시키려고하였다. FTIR과 XRD 분석을통하여해당필름시편들에대해결정화도(Crystallinity) 및결정성(Crystalline)을 분석하였다. 이러한 분석 결과를 바탕으로, 용매 증발 과정 중 마이크로웨이브 처리 과정이 PVDF 필름의 결정화도를 높여주는 것을 확인하였고, 추가적인 연신(Stretching) 공정을 통해 α 결정에서 β 결정 변화(Crystalline phase change)가 발생함으로써 결과적으로 더 많은 β 결정성을 나타내었다. 그리고 금속산화물을 넣은 PVDF 복합재료 필름이 Neat PVDF 필름보다 상대적으로 더 높은 β 결정성을 나타내는 것을 확인하였다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.12-18
• /
• 2017

Transparent organic-inorganic hybrid hard coating films were prepared by the addition of $SiO_2$ or $ZrO_2$, as an inorganic filler to improve the hardness property, filler was highly dispersed in the acrylic resin. To improve the compatibility in the acrylic resin, $SiO_2$ or $ZrO_2$ is surface-modified using various silanes with variation of the modification time and silane content. Depending on the content and kind of the modified inorganic oxide, transparent modified inorganic sols were formulated in acryl resin. Then, the sols were bar coated and cured on PET films to investigate the optical and mechanical properties. The optimized film, which has a modified $ZrO_2$ content of 4 wt% markedly improved in terms of the hardness, haze, and transparency as compared to neat acrylate resin and acrylate resin containing modified $SiO_2$ content of 8 wt%. Meanwhile, the low transparency and high haze of these films slowly appeared at $SiO_2$ content above 10 wt% and $ZrO_2$ content of 5 wt%, but the hardness values were maintained at 2H and 3H, respectively, in comparison with the HB of neat acrylate resin.

• Elastomers and Composites
• /
• 제48권1호
• /
• pp.18-23
• /
• 2013

용융상태에서 nylon 12 elastomer에 소량의 dicumyl peroxide (DCP) 와 triallyl cyanuate (TAC)를 첨가하여 nylon 12 elastomer를 부분적으로 가교시켰으며, 이에 따른 nylon 12 elastomer의 기계적, 동적기계적 그리고 유변학적 특성을 tensile test, DMA, small amplitude oscillating rheometer를 이용하여 각각 알아보았다. TAC의 함량이 증가함에 따라 인장탄성률과 영률은 증가하고, 파단신율은 감소하였다. DMA 측정결과, DCP로 부분적으로 가교시킨 nylon 12 elastomer의 PTMG상의 유리전이온도는 순수한 nylon 12 elstomer에 비해 증가하였고, storage modulus는 nylon 12상의 용융온도 이상에서도 거의 일정한 값을 나타내었다. 부분적으로 가교시킴에 따른 유변학적 특성의 변화는 TAC의 함량이 증가함에 따라 solid like behavior와 shear thinning behavior가 점점 뚜렷하게 나타남을 알 수 있었다. 이로부터 nylon 12 elastomer를 용융상태에서 부분적으로 가교시킴으로써 용융가공성을 저하시키지 않으면서, 기계적 물성은 효과적으로 향상시킬 수 있었으며, 특히, nylon 12 elastomer의 사용가능 온도범위를 증가시킬 수 있었다.

• 접착 및 계면
• /
• 제22권1호
• /
• pp.16-21
• /
• 2021

항공기 산업에서 착빙 제거 및 방지는 안전상 매우 중요한 기술이다. 착빙 제거에 대한 연구는 활발히 진행되어 실제 항공기에 적용한 상태이지만, 착빙을 사전에 방지 및 지연하는 기술은 아직 미비한 실정이다. 본 연구에서는 다른 종류의 나노입자를 코팅함으로써 폴리우레탄 탑코트의 표면거칠기 및 표면에너지를 조절하였다. 각 나노입자 종류에 따른 코팅면에 증류수를 이용한 정적접촉각을 측정하여 소수성을 평가하였고, 나노입자 코팅면의 안정도를 평가하기 위해 인발접착시험을 진행하였다. 또한, 나노입자의 종류에 따른 탑코트의 색재현성 평가를 위해 표면의 RGB 색을 비교하여 정량화를 진행하였다. 이를 통해 탑코트의 원색을 최대한 재현하면서 접착성을 가질 수 있는 최적의 소수성 표면을 얻을 수 있었다.

• 전자공학회논문지A
• /
• 제33A권3호
• /
• pp.28-37
• /
• 1996

Syntax notation one (ASN.1) defined by ITU-T and ISO, is a formal abstrct specification language which has been widely used in international standards specifiation to inteconnect distributed open systems. It si necessary to have well defined encoder/decoder modules which taranslate ASN.1 datum to BER octets stream to interconnect distributed open systems. In this paper, we designed and implemented a new ASN.1-to-C compiler, called HYASNC (hanyang ASN.1-to-C), which atutomatically translates and ASN.1-to-C compiler, called HYASNC (hanyang ASN.1-to-C), which automatically translates an ASN.1 specification into C-language BER encoders and decoders with simple and neat I/F for the defined ASN.1 data types, and enhanced BER (basic encoding rules)encoding/decoding libraries, called HY(hanyang)BER library, and useful utility functions. And this paper discusses HYASNC compiler, HY BER runtime library's design and implementation principles, and also evaluates the perfomrance of HY BER library and the interoperability with other ASN.1 compilers.

• 약학회지
• /
• 제34권2호
• /
• pp.133-138
• /
• 1990

The reaction of 2-aminobenzamide with phthalic acid anhydride In dioxane produced a bicyclic product 2,8-dioxoisoindole(1,2,a) quinazoline (I) in addition to hydrolysis product 2(2-Carboxyphenyl)-1,2-2H-quinazoline-4-one (II). The yields were 64% and 30% respectively. On the other hand, the same reaction in DMF afforded compound (I) and 2(2N-dimethyl carbamyl phenyl)-1,4-2H-quinazoline-4-one (III) in 30% and 60% yield respectively. The compound III was also obtained by the reaction of compound II with dimethylamine. However the reaction of 2-aminobenzamide with neat succinic acid anhydride gave only bicyclic product 2,8-oxopyrrolidine (2,1,a)-1,4-2H-quinazoline (IV) in 93%.