• 한국측량학회지
• /
• 제34권2호
• /
• pp.171-183
• /
• 2016

Small-scale maps currently used are made by scanning and editing printed maps and its shortcoming is accumulated errors at the time of editing and low accuracy. TM projection method is used but its accuracy varies. In addition, small-scale maps are made without consideration of usability and compatibility with other scale maps. Therefore, it is necessary to suggest projection and coordinates system improvement methods in consideration of usability and compatibility between data. The results of this study reveal that in order to make the optimum small-scale map, projection that fits the purpose of map usage in each scale, coordinate system and neat line composition should be selected in consideration of interrelation and compatibility with other maps. Conic projection should be used to accurately illustrate the entire country, but considering usability and compatibility with other maps, traversing cylindrical projection should be used instead of conic projection. For coordinates system of the small-scale map, Universal Transverse Mercator (UTM-K) based on the World Geodetic System should be used instead of conventional longitude and latitude coordinate system or Transverse Mercator.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1158-1167
• /
• 2005

The purpose of this study is to examine the effect of structural properties of plain knit fabrics on the subjective textures and sensibilities of consumers. We investigated the relationship of subjective textures and sensibilities according to fiber contents of wool/rayon and stitch loop length. We made 20 plain knit fabrics, as specimens, with a combination of 5 kinds of fiber contents and 4 kinds of stitch loop length. A factor analysis showed that subjective textures are classified into 3 categories with $R^2=70.32\%$: 'surface-rough', 'drapable', 'bulky' and 'elastic' and subjective sensibilities into 3 categories with $R^2=68.12\%$: 'stable/neat', 'feminine/elegant' and 'natural/comfortable'. The fiber contents of wool/rayon had a positive and linear relation with 'surface-rough', but had a relatively non-linear one with 'bulky' and 'elastic' categories of textures, and 'feminine/elegant' of sensibilities. The stitch loop length had a linear influence on 'drapable' and 'stable/neat', but had a non-linear influence on other subjective textures and sensibilities.

• 한국의류학회지
• /
• 제33권3호
• /
• pp.500-510
• /
• 2009

The purpose of this study was to examine the effects of facing plan on store image and preference of young casual fashion store. The subjects were 545 male and female university students in Chungnam province. The measuring instruments were 7 stimuli manipulated by facing plan, an important VMD element, and self-administrated questionnaire consisted of store image, store preference and subject's demographic characteristics. The data were analyzed by t-test, ANOVA and Duncan's multiple range test, using SPSS program. The results were as follows. First, facing type significantly affected consumer' store image; folded type had more neat and elegant image than other facing types, and face out type had most comfort image, whereas sleeve out type had discomfort image. Second, arrangement of facing types also affected store image; style arrangement had more sophisticated image than color arrangement in sleeve out type, and vertical and horizontal arrangement had more neat, sophisticated, attractive and comfort image than separate arrangement in folded type. Third, facing type affected store preference; folded type showed higher store preference than sleeve out type. Forth, arrangement of folded type affected store preference; vertical and horizontal arrangement showed higher store preference than separate arrangement. Fifth, store image and preference were different by subject's sex; male subjects perceived style arrangement as more elegant, characteristic and attractive image, and showed higher store preference than female subjects on separate arrangement of folded type.

• 한국분무공학회지
• /
• 제14권4호
• /
• pp.153-162
• /
• 2009

The use of inedible vegetable oils as substitute for diesel fuel in compression ignition engine is of significance because of the great need for edible oil as food, and the reduction of biodiesel production cost etc. Jatropha curcas oil which is a leading candidate for the commercialization of inedible vegetable oils is selected in this study for reviewing the application in CI engine as an alternative fuel. The important properties of jatropha oil (JO) and JO biodiesel are summarized from the various sources in the literature. It is found that five different types of alternative fuel from JO such as neat JO, JO blends with diesel or other fuel, neat JO biodiesel, JO biodiesel blends with diesel or other fuel and degummed JO were extensively examined in the diesel engine. Two different application types of alternative fuels from JO such as preheating and dual fuelling were also tested, It should be pointed out that most of these applications are limited to single cylinder conditions. The systematic study for the selection of effective application method is required. It is clear that the blends of JOME and diesel can replace diesel fuel up to 10% by volume for running the existing common rail direct injection systems without any durability problems. The systematic assessment of spray characteristics of different types of JO and its derivatives for use as diesel engine fuel is also required.

• 폴리머
• /
• 제30권5호
• /
• pp.402-406
• /
• 2006

천연 옻 나무에서 추출되는 항균물질 우르시올을 폴리우레탄 발포체 성형 시스템에 도입하여 항균 폴리우레탄 발포체를 제조하였다. 항균물질 우르시올 첨가량을 증가시키는 경우 발포체 성형 반응성이 약간 저하되는 것이 관찰되었으나 기계적 물성 측면에서는 항균물질 미처리 발포체와 비교하여 큰 물성저하는 관찰되지 않았다. 반면 항균성 측면에서는 항균물질 미처리 발포체에 비하여 초기 균수 대비 균수의 성장성이 감소되는 것을 확인할 수 있었다.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.83-88
• /
• 2010

The wear behavior of epoxy matrix composites filled with nano sized silica particles is discussed in this paper. Especially, the variation of the coefficient of friction and the wear resistance according to the change of apply load and sliding velocity were investigated for these materials. Wear tests of pin-on-disc mode were carried out and the wear test results exhibited as following ; The epoxy matrix composites showed lower coefficient of friction compared to the neat epoxy through the whole sliding distance. As increasing the sliding velocity the epoxy matrix composites indicated lower coefficient of friction, whereas the neat epoxy showed higher coefficient of friction as increasing the sliding velocity. The specific friction work of both materials were increased with apply load. In case of the epoxy matrix composites, the running in periods of friction were reduced as increase in apply load. The epoxy matrix composites were improved the wear resistance by adding the nano silica particles remarkably. It is expected that the load carrying capacity of the epoxy matrix composites will be improved by increase of Pv factor.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1345-1348
• /
• 2013

We investigated the tribochemical and wear properties of Polytetrafluoroethylene (PTFE) based polymer matrix composites with nanoceramic (NC) ${\beta}$-sialon, and $Al_2O_3$ particles for the mechanical seal applications at low temperature. SEM showed that NC particles were homogeneously distributed in the polymer matrix and initiated the formation of the supramolecular spherulites around NC. From the temperature stimulated depolarization (TSD) current results, it was analyzed that the surface charge on nanoceramic affected the formation of the spherulites structure. 2 wt % $Al_2O_3$ NC did not degrade the mechanical properties of PTFE so that composites showed the similar values of tensile strength, elongation at the rupture and friction coefficient as those of neat PTFE. However, the composite with 2 wt % $Al_2O_3$ NC revealed the improved wear resistance, wear rate of 0.4-1.2 mg/h at room temperature and 0.28 mg/h at $-40^{\circ}C$, respectively, while the neat PTFE the 70-75 mg/h at room temperature and 70.3 mg/h at $-40^{\circ}C$.

• 복식문화연구
• /
• 제20권3호
• /
• pp.416-429
• /
• 2012

The purpose of this study was to examine the effects of VM components(facade color and show window type) on store image and purchasing intention of fashion stores. The subjects were 428 male and female university students in Daejeon and Chungnam province. The measuring instruments were 6 stimuli manipulated by $3{\times}2$ factorial design of facade color and show window type, and a self-administrated questionnaire consisted of store image, purchasing intention, and subjects' demographic characteristics. The results were as follows. First, facade color mainly affected store image and purchasing intention. White color was preferred as more positive images(pleasurable, comfortable, neat, and modern), and showed higher purchasing intention than brown color. Second, show window type affected some store images. Semi-open type was perceived as more pleasurable image than enclosed type, whereas enclosed type was perceived as more luxurious, neat, and attractive image than semi-open type. However, show window type didn't affect purchasing intention. Third, subject' sex affected store image and purchasing intention. Male subjects perceived more positively on store image and had higher purchasing intention than females. This study suggested that facade color and show window type are important VM components affecting store image and purchasing intention.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.436-437
• /
• 2007

Organic light-emitting diodes (OLEDs) were fabricated with the electron dominant complex, 4,7-diphenyl-1, 10-phenanthroline (Bphen) into the traditional electron transporting material of tris (S-hydroxyquinoline) aluminum $(Alq_3)$, neat $Alq_3$ and Bphen as electron-transporting layers (ETLs), respectively. Use of the Bphen material results in efficient electron injection and transport, allowing for high luminous efficiency devices. The devices with neat $Alq_3$(Device1), 1:1 mixed $Alq_3$ : Bphen(Device2), and Bphen(Device3) have efficiency of 15.3cd/A, 16.9cd/A, 20.9cd/A, respectively, at $20\;mA/cm^2$. The efficiency characteristic of device with Bphen is best, but the device that is satisfied high efficiency and stability at once is observed in Device2.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.31-32
• /
• 2019

In this study, oxidized graphene nanoplatelet(GO) was prepared by oxidizing graphene nanoplatelet(GNP) with nitric acid in order to solve the problem of dispersion of GNP, one of nano materials. GNP/Epoxy and GO/Epoxy paint were prepared by mixing GNP, GO with 0.1, 0.3, 0.5 and 1.0 wt.% in epoxy paint and the mechanical properties were evaluated. As a result, GNP/Epoxy and GO/Epoxy paints showed better mechanical properties than Neat Epoxy which did not incorporate GNP, GO. Especially, when 0.3 wt.% of GO was incorporated into epoxy resin, it showed higher tensile strength than Neat Epoxy. It was confirmed that acid treatment of GNP was effective in improving the mechanical properties of epoxy paint. However, graphene material was found that it was not effective in improving the bond performance of the epoxy paint.