• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.301-305
• /
• 1999

The phase matching conditions of the new optical crystal grown by Czochralski pulling method, YCOB($YCa_4O(BO_3)_3$) with wavelength were suggested, and the second harmonic generation efficiency for the fundamental of Nd:YAG laser of 1064 nm was investigated. The variation of nonlinearity with rare earth ion doping was also investigated by measuring the second harmonic generation efficiencies of $Yb^{3+}$ + $Nd^{3+}$and ion doped YCOBs.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.154-159
• /
• 1994

The magneto-optical Kerr spectra(${\lambda}=250~700nm$) of amorphous RE-Co(RE=Ce, Nd, Pr, Gd, Tb, Er, Ho) are compared with those of Y-Co films. It has been found that the Kerr rotation of RE-Co is mainly due to Co in the long wavelength region, whereas at short wavelength Ce, Pr, Nd, and Gd contribute positively, and Tb, Ho, and Er contribute negatively to the Kerr rotation of RE-Co amorphous films. In the interesting energy region(1.5~5.0 eV), the magneto-optical contribution of Pr and Nd are thought to be related with $4f{\uparrow}->5d{\uparrow}$ interband transition, and the contribution of Ce and Gd might be concerned with d->p interband transition. The magneto-optical effect of Tb in the short wavelength region might be related with $4f{\downarrow}->5d{\downarrow}$ and/or $5d{\downarrow}->4f{\downarrow}$, and that of Ho and Er can be explained by $4f{\downarrow}->5d{\downarrow}$ magneto-optical interband transition.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.720-725
• /
• 2017

M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) catalysts were prepared for the partial oxidation of methane (POM) to syngas. The catalysts were characterized by BET, TEM, and XPS. The BET-specific surface area and average pore size for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm) were 538.8, 504.3, and $447.3m^2/g$ and 6.4, 6.8, and 7.1 nm, respectively. TEM results showed that the mesoporous hexagonol structure was formed for SBA-15, while the homogeneous dispersion of Ni and Ce particles on the surface was formed for Ce(10)-Ni(5)/SBA-15 caused by the confinment effect of SBA-15. XPS data confirmed that $Ce^{4+}$ and $Ce^{3+}$ on the surface catalyst have two oxidation states due to the lattice oxygen species ($O^{2-}$, $O^-$). The yields of POM to syngas over Ce(10)-Ni(5)/SBA-15 were 52.9% $H_2$ and 21.7% CO at 1 atm, 973 K, $CH_4/O_2=2$, $GHSV=1.08{\times}10^5mL/g_{cat.}{\cdot}h$, and these values were kept constant even after 75 h on streams. The same tendency of syngas yields was observed for M(10)-Ni(5)/SBA-15(M=Ce, Nd, Sm). These results confirm that the redox reaction of promoters including Ce, Nd, and Sm enhanced the stability and yield of catalysts.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.282-288
• /
• 1996

Because of the high water content of the household garbage, it is difficult to compost it. Therefore, this study was conducted to investigate the possibility of using coal fly ash as humidity conditioner for the household garbage composting. The summarized results are as follows : 1. The maximum temperatures were $35^{\circ}C$ in spring, $47^{\circ}C$ in summer, and $43^{\circ}C$ in winter during the composting periods. 2. The mass was reduced to 70.5% after 60 days. The average volume reduced down to 74.7% after 60 days. 3. The seasonal variation of pH values showed a similar tendency and reached 8.5 after 60 days. 4. The water content was reduced at an early stage of composting and not much changed thereafter. It had 49.7% in spring, 33.9% in summer, and 56.5% in winter after 60 days. Ash contents were not much changed during the composting periods. 5. The contents of inorganic compounds were in the range of $0.06{\sim}4.03%$ $P_2O_5$, $0.01{\sim}2.87%$ CaO, $0.18{\sim}1.43%$ MgO, and $0.39{\sim}2.03%$ $K_2O$. Heavy metal contents were in the range of $ND{\sim}14.08$ Hg ${\mu}g/kg$, $ND{\sim}0.80$ Cd mg/kg, $4.99{\sim}28.95$ Cu mg/kg, $ND{\sim}242.62$ Cr mg/kg, $ND{\sim}20.24$ Pb mg/kg, and $ND{\sim}59.87$ Zn mg/kg.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.4
• /
• pp.320-326
• /
• 1999

In rapidly solidified $Al_{92-x}Nd_8$(Cu,Ag)x ($0{\leq}X{\leq}10at%$) alloys, amorphous single phases were obtained in the ranges of $Oat%{\leq}X{\leq}4at%$ for Al-Nd-Cu system and $Oat%{\leq}X{\leq}6at%$ for Al-Nd-Ag system, respectively. Mesoscopic structures consisted of amorphous and crystalline phases were formed above solute ranges. It was founded that the mesoscopic structures were also formed near 1st exothermic peak on DSC curve by aging in amorphous single phase alloys. For example, amorphous $Al_{92-x}Nd_8$(Cu,Ag)x (X=2.4at%) alloys containing nanoscale Al particles and compounds, i.e., mesoscopic structure, exhibited higher tensile fracture strength(${\sigma}_f$) than those of amorphous single phase alloys with the same composition. The ${\sigma}_f$ showed a maximum value in the $V_f$ ranges of 10~15%. The reason is presumed that the nanoscale precipitates which have higher mechanical strength compared with the amorphous phase with the same composition act as an effective resistance to shear deformation of the amorphous matrix.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.210-219
• /
• 1999

The fundamental dispersion property of Si2N4 and a combination of AlN and Nd2O3 as sintering additives in a variety of organic solvents such as alcohols, hydrocarbons, ketones, and ethers was investigated. The stabilization mechanism and interaction between organic functional groups of the various organic additives were studied to clarify the dispersibility of the ceramic particles in the nonaqueous suspending medium. characterization of the suspensions was based mainly on electrokinetic sonic amplitude(ESA) measurements and the flow curves obtained from the rheological studies as well as estimated Hamaker constants. It was found that the contribution of electrostatic repulsive forces to the Si3N4, AlN and Nd2O3 stabilization in organic media is appreciably greater than anticipated and is dependent on the physicochemical properties of organic solvents.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.4
• /
• pp.365-371
• /
• 2015

The rare earth element(REE)s play an important role in understanding of rock formation and evolution because of their similar geochemical behaviors. Sm and Nd are more useful than other REEs because Sm-Nd isotopic system has important applications for geochemical interpretation like age dating and crustal evolution. These studies require a chromatographic technique for Sm and Nd separation from the geological samples. Ln-resin method using 0.25 M HCl as the eluent is widely used for Nd separation. However, this technique has a disadvantage of the poor elemental selectivity that the Nd fraction contains Ce as a tailing of the previous fraction. This technical report is a comparison study on the effect of eluent concentration between 0.25 M HCl and 0.15 M HCl on the separation of Nd with Ln-resin method for improving the technique of Nd separation. The results showed that the separation of Ce and Nd using 0.15M HCl as the eluent was not effective compared to the separation using 0.25 M HCl. In this experiment, we could confirm that the dilution of eluent might not be effective on the high purity separation of Nd with Ln-resin method.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.210-215
• /
• 1998

$Nd_{15}Fe_{77}B_8$ and $Nd_{16}Fe_{76}B_8$ powders were prepared by mechanical alloying in Ar atmosphere, and their phases and magnetic properties were investigated with as a function of the annealing temperature. It was found that the mechanical alloyed $Nd_{16}Fe_{76}B_8$ powder for 450 hours was amorphous phase with a part of $\alpha$-Fe crystallites. The obtained powders at 700 $^{\circ}C$ for 30 minute resulted in two phase of $Nd_2Fe_{14}B$ and $NdB_6$ by the solid-state reaction. The mechanical alloyed $Nd_{16}Fe_{76}B_8$ powder for 450 hour and annealed at 700 $^{\circ}C$ for 30 minute was showed $_iH_c\;of\;9.91\;kOe,\; B_{max}\;of\;12.93\;kG,\;Br\;of\;7.6\;kG\;and\;(BH)_{max}\;10.1\;MGOe$.

• Journal of Powder Materials
• /
• v.16 no.4
• /
• pp.285-290
• /
• 2009

HDDR treated anisotropic Nd-Fe-B powders have been widely used, due to their excellent magnetic properties, especially for sheet motors and sunroof motors of hybrid and electric vehicles. Final microstructure and coercivity of such Nd-Fe-B powders depend on the state of starting mother alloys, so additional homogenization treatment is required for improving magnetic properties of them. In this study, a homogenization treatment was performed at $900\sim1140^{\circ}C$ in order to control the grain size and Nd-rich phase distribution, and at the same time to improve coercivity of the HDDR treated magnetic powders. FE-SEM was used for observing grain size of the HDDR treated powder and EPMA was employed to observe distribution of Nd-rich phase. Magnetic properties were analyzed with a vibrating sample magnetometer.

• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2002

Rapidly solidified NdFeB powders were mixed with fine powders of pure metal elements before CA-press employed to obtain a fully dense isotropic precursor. Subsequently, the precursor was deformed by CA-deformation to obtain an anisotropic magnet. The CA-deformed anisotropic NdFeB magnets with 0.3 wt.% Zn or Sn exhibited the coercivities about 80% higher (11.4. and 11.2 kOe, respectively) than that (6.4 kOe) of the additive-free magnet.