• IE interfaces
• /
• v.21 no.4
• /
• pp.411-417
• /
• 2008

An impeller is a type of high-speed rotor that is used to compress or transfer fluid under high-speed and pressure at high temperatures. The impeller is composed of an axial hub and several blades attached along the hub. The weight and shape of an impeller must be balanced, because their imbalances can cause noise and vibration, which can lead to the breakage of the impeller blades during operation. Thus, the hub and blades of an impeller are commonly machined in a 5-axis NC machine to obtain qualified surfaces. The impeller machining strategy or process plan can not be easily obtained due to the complex, overlapped and twisted shapes of impeller blades. Skillful machining process planners may generate appropriate machining strategies based on their experiences and floor data. However, in practice most shop floor data for the impeller machining is not well-structured such that it does not effectively provide a process planner with information for machining strategies and/or process plans. This paper reports the development of a case-based machining strategy support system (CBMS) that employs case-based reasoning to obtain the machining strategy of an impeller by using the existing machining strategies of the shop floor. The CBMS generates impeller machining strategies through a stepwise reasoning process considering the similarity features between the blade shapes and machining regions. A case study is provided to demonstrate that CBMS can generate useful machining strategies facilitating process planners. The developed system can simulate the tool paths of impeller machining and runs on the web.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.10
• /
• pp.1365-1371
• /
• 2017

Objective: This study was conducted to investigate the basic information on genetic structure and characteristics of Korean Native chickens (NC) and foreign breeds through the analysis of the pure chicken populations and commercial chicken lines of the Hanhyup Company which are popular in the NC market, using the 20 microsatellite markers. Methods: In this study, the genetic diversity and phylogenetic relationships of 445 NC from five different breeds (NC, Leghorn [LH], Cornish [CS], Rhode Island Red [RIR], and Hanhyup [HH] commercial line) were investigated by performing genotyping using 20 microsatellite markers. Results: The highest genetic distance was observed between RIR and LH (18.9%), whereas the lowest genetic distance was observed between HH and NC (2.7%). In the principal coordinates analysis (PCoA) illustrated by the first component, LH was clearly separated from the other groups. The correspondence analysis showed close relationship among individuals belonging to the NC, CS, and HH lines. From the STRUCTURE program, the presence of 5 clusters was detected and it was found that the proportion of membership in the different clusters was almost comparable among the breeds with the exception of one breed (HH), although it was highest in LH (0.987) and lowest in CS (0.578). For the cluster 1 it was high in HH (0.582) and in CS (0.368), while for the cluster 4 it was relatively higher in HH (0.392) than other breeds. Conclusion: Our study showed useful genetic diversity and phylogenetic relationship data that can be utilized for NC breeding and development by the commercial chicken industry to meet consumer demands.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.612-622
• /
• 2013

In this paper, we propose a coding packet group-based ARQ scheme (rNC) for file delivery in wireless networks. rNC assumes multiple network coding points between the source and the destination. Each network coding point gathers and codes a group of packets according to the queue polling system. A queue polling system makes a few or several packets available for coding in a queue while polling the other queues in the system. Thus, we assuem a queue polling system at each network coding point. We call this group of packets as coded packet group. Each coding point acknowledges the reception of every code packet group to its previous coding point for reliable delivery. Thus, the intermediate coding points including the source can release its buffer before the packet is delivered to the destination. To guarantee the ultimate file delivery to the destination, the destination sends acknowledgement to the sender. We evaluate our proposed scheme using ns-2 and compare the performance with CodeCast. The results show that rNC works better than CodeCast in terms of packet delivery ratio and control overhead in unreliable wireless networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.6
• /
• pp.1668-1688
• /
• 2012

Cooperative communications and network coding schemes have been proposed to increase system throughput for ad hoc networks. In this paper, we present throughput and delay analysis of the new network coding-enabled cooperative MAC protocol called NC-MAC, which has been proposed by us in order to significantly enhance system performance. This protocol introduces an approach that can accommodate both cooperative communication and network coding for wireless ad hoc networks by slightly increasing overhead and modifying standards. The protocol's performance is evaluated using mathematical analysis and computer simulation and two performance measures, system throughput and average channel access delay, are used for a performance comparison with previous schemes. It is assumed that all the frames exchanged over a wireless channel are susceptible to transmission errors, which is a new but more reasonable assumption differentiating this research from previous research. Numerical results show this protocol provides significantly enhanced system performance compared with conventional cooperative MAC protocols used in previous research. For instance, system performance is 47% higher using the NC-MAC protocol than when using the rDCF protocol.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2009

This paper presents a process routing (PR) algorithm with multiple objectives. PR determines the optimum sequence of operations for transforming a raw material into a completed part within the available machining resources. In any computer aided process planning (CAPP) system, selection of the machining operation sequence is one of the most critical activities for manufacturing a part and for the technical specification in the part drawing. Here, the goal could be to generate the sequence that optimizes production time, production cost, machine utilization or with multiple these criteria. The Pareto Stratum Niche Cubicle (PS NC) GA has been adopted to find the optimum sequence of operations that optimize two conflicting criteria; production cost and production quality. The numerical analysis shows that the proposed PS NC GA is both effective and efficient to the PR problem.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.9
• /
• pp.4205-4227
• /
• 2018

Network Coding (NC) is an approach recently investigated for increasing the network throughput and thus enhancing the performance of wireless mesh networks. The benefits of NC can further be improved when routing decisions are made with the awareness of coding capabilities and opportunities. Typically, the goal of such routing is to find and exploit routes with new coding opportunities and thus further increase the network throughput. As shown in this paper, in case of proactive routing the coding awareness along with the information of the measured traffic coding success can also be efficiently used to support the congestion avoidance and enable more encoded packets, thus indirectly further increasing the network throughput. To this end, a new proactive routing procedure called Congestion-Avoidance Network Coding-Aware Routing (CANCAR) is proposed. It detects the currently most highly-loaded node and prevents it from saturation by diverting some of the least coded traffic flows to alternative routes, thus achieving even higher coding gain by the remaining well-coded traffic flows on the node. The simulation results confirm that the proposed proactive routing procedure combined with the well-known COPE NC avoids network congestion and provides higher coding gains, thus achieving significantly higher throughput and enabling higher traffic loads both in a representative regular network topology as well as in two synthetically generated random network topologies.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.77-83
• /
• 2017

The purpose of this paper is to compare SWECOM and Information & Communication Engineering NCS to explore how to improve current NCS. First, it would be helpful to use NCS competency unit and competency unit element as categorization criteria and then to provide levels and roles into performance criteria and KSA. Second, developing common lower level competency unit would decrease the redundancy of KSA and make it clear for users. Third, providing other kinds of skills along with technical skills such as management skill would be useful for users.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.43-47
• /
• 2007

In this paper, we will introduce how we utilize 3D design model information at factory automation field with welding robot OLP system which is in using at out shipyard. At this area, so far, most of design information is used in NC data generation for steel cutting, but we can utilize 3D model information at more wide and complex area likes robot welding. Moreover, OpenGL which is a graphic library can be possible to verify robot NC data is correct or not through 3D simulation even if some one is not a expert at robot handling.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.92-104
• /
• 2006

The proposed method for a force directed global placement algorithm exploits and extends techniques from two leading placers, Kraftwerk (& KraftwerkNC) and Mongrel. It combines the strengths of KraftwerkNC, force directed global placer, and Mongrel's ripple move technique which resolves cell overlaps effectively The proposed technique uses the force spreading technique used in Kraftwerk to optimize the ripple movement. While it is resolving the cell overlap and optimizing wire length physical net constraints are considered for timing. The experimental results obtained by the proposed approach shows significant improvement on wire length as well as on timing.

• Proceedings of the CALSEC Conference
• /
• 2000.08a
• /
• pp.137-149
• /
• 2000

ㆍ STEP-NC : ISO 14649 부문 - CAO/CAPP/CAM과 다양한 CNC application을 대상 - CAD/CAM 도메인과 CNC를 연결시킴으로서 상위 정보와 shop floor 정보의 information highway 개통 의의 - IMS Project의 일환으로 Aachen대학을 중심으로 현재는 문법의 제정 단계 - 수년내에 ISO 14649는 새로운 CNC 표준언어로 확정 확실시 ㆍ STEP-NC: 제어기 부문 - ISO 14649 정보를 활용하면 다양한 지적기능을 보유하는 자율제어 시스템 구축가능 - 개방형 제어구조가 권역별로 제시되고 구현되고 있는 단계 - ISO 14649 정보에 기반한 지적제어기는 아직 미달의 연구과제 ㆍ 파급효과 및 대응 (국제적인 기술경쟁력 확보) - CAD/CAM 시스템에의 ISO 14649 포용 필요 - CNC 제어기의 ISO 14649 판독 능력 필요 - ISO 14649에 기반 한 지적제어기의 구현에 관한 연구 필요 - 적극적인 International Interface 필요 - 방대한 연구: 산학연의 연구 개발과 국가적인 정책 배려 필요