• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.133-141
• /
• 2004

Statement of problem : Porcelain restorations are widely used in restorative dentistry with a high degree of general success. However, porcelain is brittle and may fracture intraorally. Sometimes a repair may be attempted using composite resin and bonding system available. Color stability of porcelain repair resins affects esthetics and prognosis of prosthesis, so that provides important criteria for the choice of porcelain repair resins. Purpose : The purpose of this study was to investigate the color stability of composite resins used widely as porcelain repair system. Materials and method : Composite resins used for this study were Carisma(Kulzer, Germany), Tetric ceram(Ivoclar, Liechtenstein), Filtek Z250(3M, USA), and Arabesk Top(VOCO, Germany). Thirty disc-shaped specimens($10{\times}2mm$) were fabricated from each composite resin. Color changes of specimens after treatment using thermocycling system(KD-TCS30, Kwang-duk F.A. Korea) and after immersion in methylene blue(0.05% by Wt) were measured with colorimeter(Model Tc-6Fx, Tokyo Denshoku Co.) and obtained data were analyzed. Results and Conclusion: The results obtained from this study were as fo11ows. 1. The color change of Filtek Z250 was lesser than those of Tetric ceram and Arabesk Top after thermocycling (12000 times). 2. All of the composite resins in this study showed increase of color change according to increase of thermocycling frequency. 3. After treatment with methylene blue, the color change of Arabesk Top was greater than those of Carisma and Tetric ceram, and Tetric ceram was more stable than others.

• Journal of the Korean Home Economics Association
• /
• v.44 no.8
• /
• pp.47-61
• /
• 2006

The study analyzed the characteristics of the daily life and the living arrangements use of the elderly with literature review after the modernization period based on the daily life perspectives. The changes in the ideology, social system, and family system, which influenced the society and families, also affected the status of the elderly and their daily lives. Consequently, they had been facing conflicts, acceptance, and internal differentiations. The characteristics of the changes in the daily lives of the elderly in different periods were as follows. The contents were written from three different perspectives, phenomenological, symbolic interaction, and Marxist. During the modernization period, the family system and the hierarchy within a family had been reformed. However, the elderly were still considered as the symbolic leader and the respected figure of the family. From a phenomenological perspective, elderlies teach the next generations and influence the family's lives. On the other hand, from a perspective of symbolic interactions, spatial adjustment behaviors toward the largest room between the elderly and the next generation were detected. The actual authority was given to the next generation. However, the elderly were still treated as the symbolic authority. Yet, as the society became more industrialized, conflicts aroused about the support of the elderly. Those, who were neglected from the family, even spent their daily time at the elderly center or the community center. The daily lives from the Marxist perspectives suggested that modernization caused the young generations, who were well-educated and had financial powers, to have initiatives. The role of the elderly was reduced and they became negligible people, who spend meaningless daily lives. The interested the Third Ages is a new perspective on the elderly, who were neglected from the industrialized society. From a phenomenological perspective, the Third Ages are the generations that seek and demand for new housing.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.7
• /
• pp.1162-1168
• /
• 2007

Although widely used as a host for recombinant protein production, Escherichia coli is unsuitable for massive screening of recombinant clones, owing to its poor secretion of proteins. A vector system containing T4 holin and T7 lysozyme genes under the control of the ptsG promoter derivative that is inducible in the absence of glucose was developed for programmed cell lysis of E. coli. Because E. coli harboring the vector grows well in the presence of glucose, but is lysed upon glucose exhaustion, the activity of the foreign gene expressed in E. coli can be monitored easily without an additional step for cell disruption after the foreign gene is expressed sufficiently with an appropriate concentration of glucose. The effectiveness of the vector was demonstrated by efficient screening of the amylase gene from a Bacillus subtilis genomic library. This vector system is expected to provide a more efficient and economic screening of bioactive products from DNA libraries in large quantities.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.10
• /
• pp.5687-5692
• /
• 2013

Type 2 diabetes mellitus (T2DM) has contributed to advanced breast cancer development over the past decades. However, the mechanism underlying this contribution is poorly understood. In this study, we determined that high glucose enhanced proteasome activity was accompanied by enhanced proliferation, migration and invasion, as well as suppressed apoptosis, in human breast cancer MCF-7 cells. Proteasome inhibitor bortezomib (BZM) pretreatment mitigated high glucose-induced MCF-7 cell growth and invasion. Furthermore, high glucose increased protein kinase C delta ($PKC{\delta}$)-phosphorylation. Administration of the specific $PKC{\delta}$ inhibitor rottlerin attenuated high glucose-stimulated cancer cell growth and invasion. In addition, $PKC{\delta}$ inhibition by both rottlerin and $PKC{\delta}$ shRNA significantly suppressed high glucose-induced proteasome activity. Our results suggest that $PKC{\delta}$-dependent ubiquitin proteasome system activation plays an important role in high glucose-induced breast cancer cell growth and metastasis.

• Structural Engineering and Mechanics
• /
• v.37 no.6
• /
• pp.671-684
• /
• 2011

Deciding on an optimal sensor placement (OSP) is a common problem encountered in many engineering applications and is also a critical issue in the construction and implementation of an effective structural health monitoring (SHM) system. The present study focuses with techniques for selecting optimal sensor locations in a sensor network designed to monitor the health condition of Dalian World Trade Building which is the tallest in the northeast of China. Since the number of degree-of-freedom (DOF) of the building structure is too large, multi-modes should be selected to describe the dynamic behavior of a structural system with sufficient accuracy to allow its health state to be determined effectively. However, it's difficult to accurately distinguish the translational and rotational modes for the flexible structures with closely spaced modes by the modal participation mass ratios. In this paper, a new method of the OSP that computing the mode shape matrix in the weak axis of structure by the simplified multi-DOF system was presented based on the equivalent rigidity parameter identification method. The initial sensor assignment was obtained by the QR-factorization of the structural mode shape matrix. Taking the maximum off-diagonal element of the modal assurance criterion (MAC) matrix as a target function, one more sensor was added each time until the maximum off-diagonal element of the MAC reaches the threshold. Considering the economic factors, the final plan of sensor placement was determined. The numerical example demonstrated the feasibility and effectiveness of the proposed scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.538-549
• /
• 2008

Recently IEEE 802.22 WG has considered Cognitive Radio (CR) technology to overcome shortage of communication channels. For using CR technology, accurate and rapid sensing method selection is extremely important. According to the channel sensing method, it is of the utmost importance because it can affect the incumbent system protection. So, optimum selection of channel sensing method is very important. IEEE 802.22 gives the solution, name of fine sensing, but the solution can not adapt to various networks. So in this paper we propose Policy-based Channel Sensing Architecture and Algorithms for Cognitive Radio Networks. The proposed channel sensing architecture and algorithms can reduce both primary system detection time and quiet time in our simulation. Among the proposed sensing algorithm, channel division round robin sensing reduce average detection time up to 70% compare to fine sensing method in IEEE 802.22.

• Asian Journal of Atmospheric Environment
• /
• v.2 no.1
• /
• pp.34-46
• /
• 2008

Emissions inputs for use in air quality modeling of Korea were generated with the emissions inventory data from the National Institute of Environmental Research (NIER), maintained under the Clean Air Policy Support System (CAPSS) database. Source Classification Codes (SCC) in the Korea emissions inventory were adapted to use with the U.S. EPA's Sparse Matrix Operator Kernel Emissions (SMOKE) by finding the best-matching SMOKE default SCCs for the chemical speciation and temporal allocation. A set of 19 surrogate spatial allocation factors for South Korea were developed utilizing the Multi-scale Integrated Modeling System (MIMS) Spatial Allocator and Korean GIS databases. The mobile and area source emissions data, after temporal allocation, show typical sinusoidal diurnal variations with high peaks during daytime, while point source emissions show weak diurnal variations. The model-ready emissions are speciated for the carbon bond version 4 (CB-4) chemical mechanism. Volatile organic carbon (VOC) emissions from painting related industries in area source category significantly contribute to TOL (Toluene) and XYL (Xylene) emissions. ETH (Ethylene) emissions are largely contributed from point industrial incineration facilities and various mobile sources. On the other hand, a large portion of OLE (Olefin) emissions are speciated from mobile sources in addition to those contributed by the polypropylene industry in point source. It was found that FORM (Formaldehyde) is mostly emitted from petroleum industry and heavy duty diesel vehicles. Chemical speciation of PM2.5 emissions shows that PEC (primary fine elemental carbon) and POA (primary fine organic aerosol) are the most abundant species from diesel and gasoline vehicles. To reduce uncertainties in processing the Korea emission inventory due to the mapping of Korean SCCs to those of U.S., it would be practical to develop and use domestic source profiles for the top 10 SCCs for area and point sources and top 5 SCCs for on-road mobile sources when VOC emissions from the sources are more than 90% of the total.

• Journal of Environmental Science International
• /
• v.11 no.3
• /
• pp.169-176
• /
• 2002

The purpose of this study is designed to estimate the air quality of subway stations that have the underground platforms in Pusan Metropolitan City, from September to November 2000, over seven times. The subjects include Yonsan-dong station, Somyon station, Pusan station, Nampo-dong station, and Tushil station. The samplings were conducted at three points of each station, i.e. gate, ticket gates, and platforms. The major materials for analysis were CO, NO, NO$_2$, and $O_3$. The experiment was conducted at 7:00 pm with KIMOTO HS-seven Handy sampler and Tedlar Bag of SKC INC(U.S.A). In order to more fully understand station environments, we also measured temperature at each point. The results showed that $O_3$ average concentration at Yonsan-dong station was higher than others with 38~51 ppb. The average concentration of NO was high at ticket gate and platform at Somyon station(119 ppb, 122 ppb), Nampo-dong station(102 ppb, 100 ppb). These results show that the air pollution of stations with underground shopping malls was higher than others. At Somyon station having a junction station, NO and NO$_2$ concentration level of platform-2(noncrowded) was higher than platform-1(crowded). This is most likely due to the accumulation of air pollutants and inadequate ventilation systems.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1294-1303
• /
• 2018

This study optimises the no-load voltage waveform of tubular hydro-generators by a simple design scheme. For different centerlines of the pole shoe and damper bar, the optimisation effects on the no-load voltage waveform are investigated in two tubular hydro-generators with different weighted powers (34 MW and 18 MW). The results are compared with those of the traditional stator-slots skewed design. The quality of the no-load voltage waveform was related to the shifting degree, and the different optimisation effects between the integer slot generator (q = 2) and the fractional slot generator (q = 11/2) were analysed. This research can improve the quality of the power output and no-load voltage waveform, and provide an effective reference for improving the industrial design and manufacture level of tubular hydro-generators.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.571-573
• /
• 2014

In today's technology streaming service's QoS technologiey is an issue. On quality video streaming service there are some technical issues exist, such as buffering. This submission is "Adaptive dual-streaming system design" which is for the integrity of the data streaming that is sent to TCP and UDP for faster transmission of data to the stream. This system provides real-time incoming video encoding in bitrate of h.264-based H through a process based on the video footage of several server and client-to-TCP and UDP via Adaptive providing streaming services in a network environment. This is an unspecified number of buffers in a network environment and continued through the minimization of various streaming for playback of videos and multimedia will be utilized in the field.