• Preventive Nutrition and Food Science
• /
• 제2권1호
• /
• pp.1-5
• /
• 1997

Solution Properties of polyelectrolytic biopolymers such as chitosen, pectin, alginate and etc. are significantly influenced by molecular weight and salt concentrations. The effect of NaCI concentration on the hydrodynamic properties of chitosan in dilute region was investigated for chitosans of varying molecular weight. Intrinsic vicosity([η]) of citosans with 5 different molecular weight was determined by glass capillary viscometer, and the viscosity average molecular weight was calculated using Mark-Houwink equation. Intrinsic viscosity decreased with increasing NaCI concentration for all chitosan samples, and it was proportional to the logarithmic NaCI concentration, i.e.,[η]∝log{TEX}$(C_{NaCl})^{$\alpha$}${/TEX}. Decreasing trend of[η] with NaCI concentration became more pronounced with increasing molecular weight. It was also found that the a values, indicating {TEX}$C_{NaCl}${/TEX} dependence of[η], were linearly correlated with the logarithmic molecular weight({TEX}$R^{2}${/TEX}=0.980). The chain stiffness parameters(B) were calculated by B=S./{TEX}$([η]_{0.1})^{1.32}${/TEX}, in which S was obtained from slope of [η] va {TEX}$I^{-1/2}${/TEX}. The B values of chitosan samples were determined to be 0.113~0071 with a average of 0.09.

• 한국전기전자재료학회논문지
• /
• 제19권8호
• /
• pp.717-723
• /
• 2006

Lead free $(Na_{0.5}K_{0.47}Cd_x)NbO_3$ ceramics (x=0.015-0.005) were prepared by the conventional mixed oxide route. The effects of CdO addition on the sintering, dielectric and piezoelectric properties of the samples were examined. The addition of CdO greatly enhanced the sinterability of ceramics and the sample has a lower dielectric loss. The $k_p\;and\;Q_m$ of the samples with 0.02 mol CdO addition are 0.35 and 125, respectively, The $(Na,K)NbO_3$ ceramics show a large degradation of $k_p$ due to the deliquescence when exposed to humidity, while the $(Na,K,Cd)NbO_3$ ceramics have no a significant degradation of it.

• 박물관보존과학
• /
• 제1권
• /
• pp.61-74
• /
• 1999

황남대총 98호분 북분과 남분에서 출토된 유리시료 40점에 대한 과학적인 분석을 실시하였다. 유리의 성분조성은 주사전자현미경-에너지분산형분광기(SEM-EDS)를 사용하여 정량분석하였고 다변량해석법을 통하여 시료를 분류하였다. 그 결과 시료 40점 모두 Na₂O를 약 20%정도 함유한 소다-석회(Na₂O-CaO-SiO₂)유리임을 확인하였으며, 다시 5개 주성분(SiO₂, Al₂O₃, Na₂O, CaO, K₂O)으로 다변량해석[주성분분석(PCA)]을 실시한 결과 2개의 군(群)으로 분류되었다. I군(群)에 포함된 시료는 Al₂O₃의 농도가 9.7%로 높고 CaO의 농도는 2.2%인데 비하여 II군(群)에서는 각각 3.2%, 4.9%의 범위로 나타났다. 특히 시료 No. 12의 노란색으로 편석된 부분을 미소부위 XRD로 분석한 결과 PbSnO₃임을 국내 최초로 확인할 수 있었다. 연(鉛)을 함유한 시료 중 No. 12, 17은 열이온화질량분석기(TIMS)로 납동위원소비를 측정하였고 선형판별식분석법(SLDA)을 이용하여 납의 산지를 추정하였다. 그 결과 각각 중국 남부, 한국 남부의 납광석을 사용한 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제29권10호
• /
• pp.659-664
• /
• 2016

Thermal and electrical conductivities of the natural, artificial, and expandable graphites were analyzed after treatment in NaOH aqueous solution. In order to investigate the elimination of the oxidized groups and impurities on the graphite surfaces after NaOH treatment, the graphite samples were structurally characterized by using XRD, XPS, Raman, FE-SEM. The thermal and electrical conductivities of the graphite samples were significantly improved after NaOH treatment. These results were caused by the structural rehabiliation.

• 한국세라믹학회지
• /
• 제25권2호
• /
• pp.136-142
• /
• 1988

β-Al2O3, which is used for solid electrolyte membrances in sodium-sulfur batteries, was prepared by sol-gel process. Sodium-n-propoxide NaOC3H7 and aluminum-isopropoxide Al(OC3H7)3 were hydrolyzated in the solution at pH 3, pH 7, pH 9 and pH 11, respectively. The sol-gel processed samples were calcined at several temperature steps, respectively and analysed by thermal analyser(DT-TGA), infrared spectrum analyser and X-ray diffraction analyser. The gelling rate of solution at pH 7 was much higher than that of the solution at pH 3. Thermal exchanging behavior of the gels at pH 3 were similar to Na2O·Al2O3·6H2O and, above pH 7, were similar to Na2O·Al2O3·3H2O. When samples' composition ratio was 9.13 : 90.87 [NaOC3H7:Al(OC3H7)3] at pH 7, β-Al2O3 was formed at 1100℃.

• 공학논문집
• /
• 제6권2호
• /
• pp.23-32
• /
• 2004

현재까지 사용되어가지고 있는 임플란트 재료 중 commercially pure titanium (순수티탄; Cp-Ti)과 Ti-alloy들은 생체재료로 폭넓게 사용되어지고 있는데, Ti 금속들은 경도가 강하고 점도가 높기 때문에, 치과나 정형외과 등의 하중에 잘 견디는 곳에 이용되어지고 있다고 한다. 이것들은 생체적합성과 부식에 대한 저항성도 좋은 것으로 알려져 있다. 일반적으로 Ti은 4종류의 Grade로 강도의 차이에 의하여 분류되고 Ti의 강도에 영향을 미치는 것으로는 산소, 철, 질소등이 있다. 따라서 본 연구에서는 O와 Fe의 함량을 달리한 Ti alloy시편을 사용하여 생체적합성 실험을 하였다. 먼저 실험은 시편을 micropolishing하고 5M NaOH에서 $60^{\circ}C$에서24시간 처리하여서 비표면적을 넓혔으며, 표면의 $TiO_2$을 만들어주기 위하여 $600^{\circ}C$에서 열처리하였다. 그런 시편을 $36.5^{\circ}C$의 SBF에 넣어 1~14일까지 침적한 후에 표면에 형성된 apatite를 SEM과 EDAX로 조사하였다. 조사 결과 모든 시편에서 apatite가 생성되었지만, 시편의 조성에 따라서 apatite의 형성양이 다름을 확인하였다.

• 한국표면공학회지
• /
• 제34권1호
• /
• pp.39-48
• /
• 2001

Fe-Cr-Al alloy has been studied for application in automobile muffler materials due to good corrosion and oxidation resistance. In order to develop the automobile muffler materials, corrosion behaviors of electron beam physical vapor deposition (EB-PVD) coated surface of muffler matericls of muffler materials were investigated using potentiostat. For 0.1M NaCl solution, corrosion potential and pitting potential of Fe-20Cr-10Al was higher than that of Fe-5Cr- 10Al samples. Especially, in the case of Ti and Nb coated samples, pitting potential increased remarkably compared with non-coated samples. For 0.1M $CaCl_2$ solution, Ti-coated Fe-20Cr-10Al showed remarkably improved pitting corrosion resistance in comparison with non-coated Fe-20Cr-10Al and Fe-5Cr-10Al. The number and size of pits were decreased in the case of Ti coated samples in the 0.1M NaCl and 0.1M $CaCl_2$ solution.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.33-34
• /
• 2003

Lyocell yarns were treated with NaOH, liquid ammonia, high pressure steam and polycarboxylic acids, and dyed with five reactive dyes. The water content of the samples was also measured by the centrifugal and chromatographic techniques. The total pore volume w as substantially increased by NaOH treatment, while decreased by high pressure steaming. The pore size distributions for the dyed samples were affected by the dyes used.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.12-12
• /
• 2009

We weal know that PbO was poisonous and prone to volatilize, then to pollute the circumstance and hurt to people, so we should dope other innocuous additives instead of lead to increase Tc of composite PTC material. In order to prepare lead-free $BaTiO_3$-based PTC with middle Curie point, the incorporation on $(BaNaK)(TiNb)O_3$ into $BaTiO_3$-based ceramics was investigated on samples containing 0.05, 0.07 and 0.1mol% of $(BaNaK)(TiNb)O_3$. $(BaNaK)(TiNb)O_3$ was compounded as standby material by conventional solid-state reaction technique. The starting materials were $Na_2O_3$,$K_2CO_3$, $BaCO_3$, $TiO_2$ and $Nb_2O_5$ powder, and using solid-state reaction method, too. The microstructure of samples were investigated by SEM, DSC, XRD and dielectric properties. Phase composition and lattice parameters were investigated by X-ray diffraction. Also, we are measure the resistivity of sintered bodies with calcinations condition.

• 한국자기학회지
• /
• 제9권1호
• /
• pp.17-22
• /
• 1999

육방구조의 M형 BaFe12O19를 NaCl를 첨가한 경우와 첨가하지 않은 경우에 질소가스 분위기와 공기 중에서 여러 온도로 가열하여 고상반응법으로 제조하였다. X-선 회절법과 Mossbauer분광법에 의하여 BaFe12O19상과 $\alpha$-Fe2O3상의 공존 정도를 알아냈다. 동일한 조건에서 NaCl를 첨가한 경우가 NaCl를 첨가하지 않은 경우 보다 $\alpha$-Fe2O3상이 적음을 확인하였다.