• Tribology and Lubricants
• /
• v.4 no.2
• /
• pp.44-51
• /
• 1988

Titanium carbide(TiC), Titanium nitride(TiN), and Titanium carbonnitride(Ti(C,N)) films were deposited on $Si_3N_4$-TiC composite cutting tools by chemical vapor deposition(CVD) using $TiCl_4-CH_4-H_2$, $TiCl_4-N_2-H_2$, and $TiCl_4-CH_4-N_2-H_2$ gas mixtures, respectively. The experimental results indicate that TiC coatings compared with TiN coatings on $Si_3N_4$ -TiC ceramic have an improved microstructural property, good thermal shock resistance, and good interfacial bonding. However TiN coatings compared with TiC coatings have a low friction coefficient with steel and good chemical stability. It is found by cutting test that coated insert compared with $Si_3N_4$-TiC ceramic have a superior flank and crater wear resistance. And multilayer coating compared with monolayer coating shows a improved wear resistance.

• Korean Journal of Veterinary Service
• /
• v.45 no.3
• /
• pp.181-189
• /
• 2022

Streptococcus is one of the major pathogen groups inducing bovine mastitis. The aim of this study was to investigate the antimicrobial resistance patterns of Streptococcus species isolated from bovine mastitis milk samples in Korea from 2016 to 2021. In total, 181 (10.3%) Streptococcal isolates were collected from 1,761 quarter milk samples at 122 farms; S. uberis 39.2% (n=71), S. dysgalactiae 29.3% (n=53), S. equinus 9.9% (n=18), S. suis 6.1% (n=11), S. parauberis 4.4% (n=8), S. lutetiensis 3.9% (n=7), others 7.2% (n=13). However, S. agalactiae was not isolated. The isolates showed the highest resistance rate to tetracycline (55.2%) followed by erythromycin (45.3%) and pirlimycin (36.5%). In contrast, all isolates were susceptible to ceftiofur, cephalothin, penicillin/novobiocin, and only single S. equinus isolate was resistant to both ampicillin and penicillin. Of 181 isolates, 64 (35.4%) were multidrug resistance (MDR). The resistance to pirlimycin of S. uberis (73.2%) was much higher than that of other species (0~36.4%). All S. suis isolates were resistance to tetracycline. S. dysgalactiae showed lower resistance to erythromycin, pirlimycin and tetracycline than S. uberis and S. suis. The rate of MDR was relatively higher among S. uberis (73.2%) than among S. suis (36.4%), S. dysgalactiae (15.1%), others (0%). In conclusion, antimicrobial resistance in Streptococcus spp. should be regularly examined for appropriate therapies because the resistance patterns were various among the individual species.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.4
• /
• pp.168-174
• /
• 2013

In this study, low-cost, high-speed deposition, excellent processability, high mechanical strength and electrical conductivity, chemical stability and corrosion resistance of stainless steel to meet the obsessive-compulsive (0.1 mm or less) were selected CrN thin film. new price reduction to sputter deposition causes - the possibility of sublimation source for inductively coupled plasma Cr rods were attempts by DC bias. 0.6 Pa Ar inductively coupled plasmas of 2.4 MHz, 500 W, keeping Cr Rod DC bias power 30 W (900 V, 0.02 A) is applied, $N_2$ flow rate of 0.5, 1.0, 1.5 sccm by varying the characteristics of were analyzed. $N_2$ flow rate increases, decreases and $Cr_2N$, CrN was found to increase. In addition to corrosion resistance and contact resistance, corrosion resistance, electrical conductivity was evaluated. corrosion current density than $N_2$ 0 sccm was sure to rise in all, $N_2$ 1 sccm at $4.390{\times}10^{-7}$ (at 0.6 V) $A{\cdot}cm^{-2}$, respectively. electrical conductivity process results when $N_2$ 1 sccm 28.8 $m{\Omega}/cm^2$ with the lowest value of the contact resistance was confirmed that came out. The OES (SQ-2000) and QMS (CPM-300) using a reactive deposition process to add $N_2$ to maintain a uniform deposition rate was confirmed that.

• Journal of Powder Materials
• /
• v.8 no.3
• /
• pp.174-178
• /
• 2001

The microstructure and mechanical properties of $Si_3N_4/BN $nanocomposites synthesized by chemical processing were investigated. The nanocomposites containing 15 vol% hexagonal BN (h-BN) were fabricated by hot-pressing $\alpha-Si_3N_4$powders covered with turbostratic BN (t-BN). The t-BN coating on $\alpha-Si_3N_4$particles was prepared by heating $\alpha-Si_3N_4$ particles covered with a mixture of boric acid and urea in hydrogen gas. TEM observations of this nanocomposite revealed that nano-sized h-BN particles were homogeneously dispersed within $Si_3N_4$grains as well as at grain boundaries. The strength and thermal shock resistance were significantly improved in comparison with the $Si_3N_4/BN$ microcomposites.

• Korean Journal of Materials Research
• /
• v.1 no.1
• /
• pp.9-17
• /
• 1991

TiC coating formed on $Si_3N_4-TiC$ composite ceramic by chemical vapor deposition (CVD) has an improved microstructures, better thermal shock resistance and interfacial bonding than TiN coating does. TiN coating formed by CVD, however, has lower friction coefficients against steels and better chemical stability. The experimental results indicate that the coated insert is superior to the uncoated one in flank and crater wear resistance. And the multilayer coating shows an improved wear resistance than the monolayer coating.

• Corrosion Science and Technology
• /
• v.2 no.2
• /
• pp.75-81
• /
• 2003

Chromium, molybdenum. and nitrogen are very important alloying elements in stainless steels and its effect was approved in pitting resistance equivalent (PRE) equations and many experimental results. However, Cr can improve the corrosion resistance, but facilitate the formation of sigma phase. Also. Mo has the same effect in stainless steels. If Cr and Mo are added at high amount to increase the corrosion resistance of stainless steel, corrosion resistance in annealed alloys can be improved, but in case of welding or aging heat treatment. its resistance will be drastically decreased. In this work, increasing Cr and N contents but decreasing Mo than the commercial alloys made the experimental alloys. Typical alloys are 25Cr-4.5Mo-0.43N alloy, 27Cr-4.7Mo-0.4N alloy, 27Cr-5.3Mo-0.25N alloy, 32Cr-2.6Mo-0.36N alloy. After annealing and aging heat treatment, microstructures, anodic polarization test, and pitting corrosion test were performed. Annealed alloys showed $100^{\circ}C$ of CPT and aged alloys showed the different tendency depending upon Cr and Mo contents(SFI)

• Korean Journal of Veterinary Service
• /
• v.45 no.3
• /
• pp.171-180
• /
• 2022

The aim of this study was to investigate the prevalence of antimicrobial resistance and virulence factors in staphylococci isolated from canine otitis externa. A total 295 causative microorganisms were isolated. The most common isolated species were Staphylococcus (S) pseudintermedius (94 isolates) followed by Pseudomonas aeruginosa (60 isolates), S. schleiferi (25 isolates), Escherichia coli (23 isolates) and Proteus mirabilis (20 isolates). Staphylococci isolates were showed high resistance to penicillin (78.6%), erythromycin (55.9%), tetracycline (52.4%), clindamycin (51.7%) and ciprofloxacin (42.8%). Of the 145 staphylococci isolates, 49 (33.8%) methicillin-resistant staphylococci (MRS) were observed, distributed among S. pseudintermedius (n=34), S. schleiferi (n=6), S. epidermis (n=4), S. hominis (n=2), S. aureus, S. caprae and S. saprophyticus (n=1, respectively). Forty-three (87.8%) of 49 MRS and 10 (10.4%) of 96 methicillin-susceptibility staphylococci harbored mecA gene. About 80% of MRS were multidrug-resistant with resistance to at least one antibiotic in three or more antibiotic classes. Resistance genes blaZ (93/114, 81.5%), ermB (35/81, 43.2%), ermC (3/81, 3.7%), aacA-aphD (50/54, 92.5%), tetM (69/76, 90.7%) and tetK (6/76, 7.8%) were detected among resistant isolates. Virulence factors genes lukF and lukS were found in 100%(145/145) and 43.4%(63/145), respectively. Genes encoding ermA, eta, etb and tsst were not detected. To the best of our knowledge, this is the first study which investigated for the presence of genes encoding antimicrobial resistance and staphylococcal toxins in staphylococci isolated from canine otitis externa. A continuous monitoring and surveillance program to prevent antimicrobial resistance in companion animals is demanded.

• Journal of the Korean institute of surface engineering
• /
• v.24 no.1
• /
• pp.34-34
• /
• 1991

Corrosion behavior of TiN coated steel was studied in terms of thickness of interlayer Ti and TiN coating TiN was are ion plated to a thickness of 1$\mu\textrm{m}$ and 2$\mu\textrm{m}$ respectively with interlayer coating of Ti of 1$\mu\textrm{m}$, 2$\mu\textrm{m}$ and 3$\mu\textrm{m}$. Corrosion resistance of TiN coated steel was evaluated by anodic palarization test in 1N H2SO4 as well as salt spray test. Porosity of each coating was also tested by using SO2 test method. Corrosion current density decreased with increasing TiN coating thickness and Ti interlayer coating markedly enhanced the corrosion resistance. Ti interlayer coating of 2$\mu\textrm{m}$ and 3$\mu\textrm{m}$ prior to 2$\mu\textrm{m}$ TiN coating decreased the corrosion current density of active range by an order of 4 and that of passive range by an order of 2. This improvement was associated with the retardation of corrosive agent penetration with increasing coating thickness and inherent corrosion resistance of Ti interlayer. Ti interlayer coating was also very effective in improvement of corrosion resistance under salt atmosphere.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.302-308
• /
• 2001

The polymers with various composition of 4-vinylpyridine (4-VP) with n-butyl acrylate (n-BA) and 2-hydroxypropyl methacrylate (HPMA) were synthesized as a humidity sensitive material and quaternized with 1.5-dibromopentane. Resistance versus relative humidity decreased with increase in the content of n-BA in the copolymer. The introduction of HPMA increased the resistance of the humidity sensor as well as enhanced the adherence to the alumina substrate. In the case of 4-VP/n-BA/HPMA=80/10.10, the hysteresis and temperature coefficient were $\pm$2%RH and -0.42∼0.46%RH/$\^{C}$. The average resistance at 30%RH, 60%RH and 90%RH are 3.1㏁, 155 ㏀ and 7.9 ㏀, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.25 no.1
• /
• pp.34-39
• /
• 1992

Corrosion behavior of TiN coated steel was studied in terms of thickness of interlayer Ti and TiN coating. TiN was arc ion plated to a thickness of 1$\mu\textrm{m}$ and 2$\mu\textrm{m}$ respectively with interlayer coating of Ti of 1$\mu\textrm{m}$, $2\mu\textrm{m}$ and $3\mu\textrm{m}$. Corrosion resistance of TiN coated steel was evaluated by anodic palarization test in 1N $H_2$SO$_4$ as well as salt spray test. Porosity of each coating was also tested by using $SO_2$ test method. Corrosion current density decreased with increasing TiN coating thickness and Ti interlayer coating markedly enhanced the corrosion resistance. Ti interlayer coating of $2\mu\textrm{m}$ and $3\mu\textrm{m}$ prior to $2\mu\textrm{m}$ TiN coating decreased the corrosion current density of active range by an order of 4 and that of passive range by an order of 2. This improvement was associated with the retardation of corrosive agent penetration with increasing coating thickness and inherent corrosion resistance of Ti interlayer. Ti interlayer coating was also very effective in improvement of corrosion resistance under salt atmosphere.