• Journal of the Korean Institute of Telematics and Electronics
• /
• v.13 no.4
• /
• pp.18-23
• /
• 1976

We have obtained the solution of van der Pol's equation characterized by an arctangent nonlinearity, using the perturbation method by writing periodicity conditions: $$X^{(n)}(2{\pi})-X^{(n)}(0)=0$$ $$X^{(n)'}(2{\pi})-X^{(n)'}(0)=0 (n=0,1,2......)$$ together with the starting condition: $$X^{(n)}(\frac{\pi}{2})=0,\;X^{(n)}'(\frac{\pi}{2})=-R^{(n)}$$. Our results agree with Liapunov's theorem and our calculated value is more similar to Murata's measured value than Murata's calculated value.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.4
• /
• pp.61-68
• /
• 2015

MANET has various vulnerability in wireless network and is more vulnerable in security because central management is not performed. In particular, routing attack may decrease performance of the overall network because the mobile node acts as a router. In this paper, we proposed authentication technique for improving the reliability of the network by increasing the integrity of the routing control packet and blocking effectively attacks that occur frequently in the inside. The proposed technique is consisted of two authentication methods of ZCN and N2N. ZCN authentication method is to elect CA nodes and monitor the role of the CA nodes. N2N authentication method is for an integrity check on the routing packets between nodes. Index key is determined by combining the hop count value to shared key table issued from CA in order to increase the robustness of the internal attack. Also, the overhead of key distribution was reduced by distributing a shared key to nodes certificated from CA. The excellent performance of the proposed method was confirmed through the comparison experiments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1115-1121
• /
• 2007

[ $Bi_2Sr_2Ca{_{n-1}}Cu_nO_x$ ](n=0,1,2) thin fans have been fabricated by co-deposition at an ultra-low growth rate using ion beam sputtering(IBS) method. Bi 2212 phase appeared in the temperature range of 750 and $795^{\circ}C$ and single phase of Bi 2201 existed in the lower region than $785^{\circ}C$. Whereas, $PO_3$ dependance on structural formation was scarcely observed regardless of the pressure variation. And high quality of c-axis oriented Bi 2212 thin film with $T_c$(onset) of about 90 K and $T_c$(zero) of about 45 K is obtained. Only a small amount of CuO in some films was observed as impurity, and no impurity phase such as $CaCuO_2$ was observed in all of the obtained films.

• YAKHAK HOEJI
• /
• v.24 no.2
• /
• pp.135-141
• /
• 1980

The crystal and molecular structure of 2-methyl-3-(N-trimethyl ammonium)phenol iodide, $C_{10}H_{16}NOI, was determined by X-ray diffraction method. The compound crystallizes in the orthorhombic space group $P_{na2}_{1}$ with a=13.327(3), b=12.496(3), C=7.227(2)A and Z=4. A total of 489 independent observed reflections were collected by the automated Four-circle diffractometer and was solved by heavy atom method and refined by anisotropic block-diagonal least-squares method to the R value of 0.04. The benzene ring is slightly distorted from regular hexagon. The I atom and 2-methyl-3-(N-trimethyl ammonium)phenol group is held together by van der Waals forces in the crystal. Intermolecular hydrogen bond is of the type O-H....I with the length 3.35.angs.. Apart from the hydrogen bonding system the molecules are held together by van der Waals forces in the crystal.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.352-354
• /
• 1999

The spectrophotometric determination of Cu(Ⅱ) with α-(2-benzimidazolyl)-α',α"-(N-5-nitro-2-pyridylhydrazone)-toluene has been investigated. The optimum conditions of pH, stability, concentration of ligand and surfactant were evaluated. This method is a simple and sensitive method for determination of Cu(Ⅱ) and offers a selective separation of Cu(Ⅱ) from sample solution containin- I ppm below amount of Ni(Ⅱ), Co(Ⅱ), Zn(Ⅱ) and Sn(Ⅱ). Copper was determined by measuring the absorbance of Cu(Ⅱ)-BINPHT complex extracted with benzene in Brij 58 surfactant at 410 nm. Beer's law is obeyed over the concentration range 0∼2.5 μgmL-1 and the detection limit (S/N=2) is 0.06 μgmL-1. The relative standard deviation at the 0.3 μgmL-1 is 2.4% (N=7). The method was applied for the determination of Cu(Ⅱ) in various milks.

• Journal of applied mathematics & informatics
• /
• v.25 no.1_2
• /
• pp.119-136
• /
• 2007

Block Jacobi and Gauss-Seidel iterative methods are studied for solving $n{\times}n$ fuzzy linear systems. A new splitting method is considered as well. These methods are accompanied with some convergence theorems. Numerical examples are presented to illustrate the theory.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.9-16
• /
• 2012

In this paper, we propose the two dimensional variable-length vector storage format which can be used for efficient storage of sparse matrix in the FEM (finite element method). The proposed storage format is the method storing only actual needed non-zero values of each row on upper triangular matrix with the total rows N, by using two dimensional variable-length vector instead of $N{\times}N$ large sparse matrix of entire equation of finite elements. This method only needs storage spaces of the number of minimum 1 to maximum 5 in 2D grid structure and the number of minimum 1 to maximum 14 in 3D grid structure of analysis target. The number doesn't excess two times although involving index number. From the experimental result, we can find out that the proposed storage format can reduce the memory space more effectively, as the total number of nodes increases, than the existing skyline storage format storing maximum column height.

• YAKHAK HOEJI
• /
• v.18 no.3
• /
• pp.183-189
• /
• 1974

Distribution coefficients between nitrobanzene solution and deionized water, show a straight line when the number of alkyl radicals against the logarithm of distribution coefficient of the salts was plotted. After extracting salts of the indicator and the cationic surfactants with organic solvents, and employing the colorimetric method was used. A calculation method of distribution coefficients of the salts in the organic solvent has been suggested and it could be used for the extraction equilibrium of the primary amine, $CH_{3}(CH_2)_{n}NH_3^+$ secondary amine, $CH_{3}(CH_2)_{n}NH_{2}(CH_3)^+$, tertiary amine $CH_{3}(CH_2)_{n}NH(CH_3)_2^+$ and quaternary ammonium, $CH_{3}(CH_2)_{n}N(CH_3)_3^+$MO$^-$salts, (n=3,5,7,11).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.12.1-12.1
• /
• 2010

We have developed a facile method to position different dyes (N719 and N749) sequentially in a mesoporous TiO2 layer through selective desorption and adsorption processes. Only upper part of the first adsorbed N719 dye was selectively removed by the desorption solution formulated with polypropylene glycol and tetrabutylammonium hydroxide without any damages of the dye. The desorption depth was controlled by the number of desorption process. Multi-dyed dye-sensitized solar cells (MDSSC) were fabricated by utilizing the method and their photovoltaic properties were investigated. From the incident photon-to-current conversion efficiency (IPCE) measurement, it was found that the MDSSC exhibited the extended spectral response for the solar spectrum while without decrease of maximum IPCE value compare to the DSSCs using one kind of dye (N719 or N749). The highest photocurrent density of 19.3 mA/cm2 was obtained from the MDSSC utilizing $15\;{\mu}m$ N719 / $14\;{\mu}m$ N749 bi-layered mesoporous TiO2 film. The photocurrent density was 25% and 8% higher than that of the DSSC using only N719 and N749 dye as a sensitizer, respectively. The power conversion efficiency of 9.8% was achieved from the MDSSC under the AM 1.5G one sun illumination.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.180-190
• /
• 1997

A new method in the fault tree analysis (FTA) for the reliability calculation is suggested. Two steps are necessary in traditional method in evaluation of the occurrence probability of top event in fault tree (FT). The first step is to find the minimal outsets, and the second one is to substitute the result into the poincare equation. In order to reduce the enormous computing time of this method, lots of rapid algorithms have been developed. Almost of all achievements were, however, based on the partial structural properties of FT. In this paper, the FT is transformed to a non-linear graph G which has the same minimal outsets of original n, and then the reliability is calculated using the domination theory. In this new method, the required number of equation terms are at most $2^n$ (n is node number of graph G), while $2^m$-1 (m is the number of minimal cutsets) calculation terms are required in the poincare equation in traditional method. Since m>>n in general. our new method reduces the calculation time significantly.