• Korean Journal of Optics and Photonics
• /
• v.9 no.2
• /
• pp.76-85
• /
• 1998

Organic single crystal of p-toluene sulfonate(PTS) bulks and thin films were fabricated using a slow solution evaporation method. Third and fifth order nonlinear refractive indices, $n_2$and $n_3$, of PTS crystals at 1600 nm were determined by the Z-scan method and the multimode output of the PTS thin film waveguide was observed at 1350 nm. When the beam intensity is in 2-5 GW/$cm^2$, the nonlinear refractive indices are $n_{2}=6{\times}10^{-4}cm^{2}$/GW and $n_{3}=-7{\times}10^{-5}cm^{4}/GW^{2}$ and the two and three photon absorption coefficients are zero. When the beam intensity is in 5~16 GW/$cm^2$, the split-step fast Fourier transform beam propagation method simulation shows that the beam propagation in the PTS is distorted from the gaussian shape.

• Journal of Chest Surgery
• /
• v.26 no.12
• /
• pp.934-939
• /
• 1993

Mediastinal lymph node involvement [N2 disease] is generally accepted as an important factor influencing the outcome of patients with lung cancer.The long-term survival rates of completely resected patients with N2 disease are frequently reported from 15% to 30%.To improve the management and the outcome of patients with resectable N2 disease, we analyzed the survival rates and the prognostic factors for resected N2 lung cancer. Between August 1989 and September 1993, we experienced 27 patients with N2 disease of 115 surgically treated lung cancer at the Department of Thoracic and Cardiovascular Surgery, Asan Medical Center, Ulsan University Medical School. Of these 27 N2 disease 4 had only an exploratory thoracotomy, and 23 underwent pulmonary resection by pneumonectomy[15], bilobectomy[3], lobectomy[4] and sleeve lobectomy[1].All of resected 23 patients received postoperative adjuvant chemotherapy[3], radiotherapy[2] or combined chemo-radiotherapy[18].Complete follow-up was obtained in 23 patients and median survival was 22 months and overall 1-year and 2-year survival rates by Kaplan-Meir method were 65 % and 45 %, respectively. Survival differences according to histology, tumor location, number of positive nodal station and operative method were not significant, statistically. Conclusively, we think that in resectable N2 lung cancer, complete tumor resection and mediastinal lymph node dissection, and postoperative adjuvant therapy should be done to improve the survival.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.199-203
• /
• 2012

A modified sol-gel method and $N_2$-plasma treatment were used to prepare bulk and surface doped N-$TiO_2$, respectively. XRD, TEM, UV-vis spectroscopy, $N_2$ adsorption, Elemental Analyzer, Photoluminescence, and XP spectra were used to characterize the prepared $TiO_2$ samples. The N doping did not change the phase composition and particle sizes of $TiO_2$ samples, but increased the visible light absorption. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activity of surface doped N-$TiO_2$ prepared by $N_2$-plasma was much higher than that of bulk doped N-$TiO_2$ prepared by sol-gel method. The possible mechanism for the photocatalysis was proposed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.1
• /
• pp.44-47
• /
• 2009

This paper describes the information for quantitative simulation of weakly ionized plasma. We must grasp the meaning of the plasma state condition to utilize engineering application and to understand materials of plasma state. $SF_6$ gas is widely used in industrial of insulation field. In this paper, $N_2$ is mixed to improve pure $SF_6$ gas characteristics. Electron transport coefficients in $SF_6-N_2$ mixture gases are simulated in range of E/N values from 70 to 400 [Td] at 300K and 1 Torr by using Boltzmann equation method. The results of this method. which are ionization coefficient, attachment coefficient, effective ionization coefficient, and critical E/N, can be important data to present characteristic of gas for insulation. Specially critical E/N is a data to evaluate insulation strength of a gas and is presented in this paper for various mixture ratios of $SF_6-N_2$ mixture gases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.613-616
• /
• 2001

This $SF_{6}$ gas is widely used in industrial of insulation field. In this paper, $N_2$ is mixed to improve pure $SF_{6}$ gas characteristics. Electron transport coefficients in $SF_{6}$-$N_2$ mixture gases are simulated in range of E/N values from 70 to 400 [Td] at 300K and 1 Torr by using Boltzmann equation method. The results of this method, which are like electron drift velocity, ionization coefficient, attachment coefficient, effective ionization coefficient, and critical E/N, can be important data to present characteristic of gas for insulation. Specially critical E/N is a data to evaluate insulation strength of a gas and is presented in this paper for various mixture ratios of $SF_{6}$-$N_2$ mixture gases.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.171-176
• /
• 1999

Template matching is one of the most often used techniques for machine vision applications to find a template of size M$\times$M or subimage in a scene image of size N$\times$N. Most template matching methods, however, require pixel operations between the template and the image under analysis resulting in high computational cost of O(M2N2). So in this thesis, we present a two stage template matching method. In the first stage, we use a novel low cost feature whose complexity is approaching O(N2) to select matching candidates. In the second stage, we use conventional template matching method to find out the exact matching point. We compare the result with other methods in terms of complexity, efficiency and performance. Proposed method was proved to have constant time complexity and to be quite invariant to noise.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.1
• /
• pp.50-57
• /
• 2008

Winter season cultivation of rye as green manure for soybean have been a favorite with farmer because it could remove a risk of injury by continuous cropping and increase N uptake and yield of soybean. Effects of rye green manure on soybean N uptake, $N_2$ fixation and yield were investigated with $^{15}N$ as pot experiment in greenhouse in 2004 and field in 2005, respectively. The N derived from N fertilizer ($^{15}N$) in rye green manure increased with increasing of N fertilizer rate compared to N derived from soil. N uptake and DM yield of soybean at the pot with paddy soil was higher than those at the pot with upland soil mainly due to the increase of N uptake from paddy soil. Total $^{15}N$ recovery in soil was higher at rye green manure than no green manure because $^{15}N$ applied to rye plant was remained highly as soil organic N compared to chemical N fertilizer. $^{15}N$ recovery in soybean plant increased in proportion to amounts of N fertilizer applied to rye. The N fractions from $N_2$ fixation of soybean plant at the pot experiment in 2004 ranged from 92% to 95%, on the other hand those in field experiment in 2005 ranged from 82% to 84%. Estimation of amount of $N_2$ fixation was not different between Difference method and $^{15}N$ method in 2004 and 2005.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9C
• /
• pp.860-870
• /
• 2005

In this paper we propose a new method to derive GRM(Generalized Reed-Muller) coefacients for each $2^{n}$ polarities using cell of karnaugh map(k-map). Generally, there are the serial and parallel method to derive GRM coefficients. As a serial method, Green method generates GRM coefncients using transform matrix. And as a parallel method, Besslich algorithm produces GRM coefficients of each polarity using the generated anteriorly. Green's method generates GRM coefficients for n-variable by calculating transform matrix for one-variable and n-times kronecker product this matrix. And Besslich's method generates GRM coefficients of each polarity in order of Grey-code. But those methods have disadvantages that the number of variable exceeding four makes transform matrix large and there are so many operation steps. In this paper, GRM coefficients is generated by producing cell [$f_{i}$] minimizing variable on k-map and operating this cell [$f_{i}$] and transform matrix for one-variable. So, we can generate GRM coefficients of all polarities easily by using the proposed method.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.219-227
• /
• 1996

The purpose of this research is to develop the technology for the synthesis of (Ti,Al)N powder, which shows simultaneously the excellent properties of TiN and AlN, from the Ti-Al intermetallic compounds by the direct nitriding method. The effects of variables such as temperature, Ti-Al intermetallic compounds ($TiAl_3$, TiAl and $Ti_3Al$) were investigated by TG, XRD and SEM. The (Ti,Al)N powder can be easily synthesized from the intermetallic compounds by the direct nitriding method. Among the intermetallic compounds, the nitriding behavior increased with TiAl> $Ti_3Al$ > $TiAl_3$, as the difference of diffusion coefficient for nitrogen in each materials. The ternary nitride such as $Ti_2AlN$ and $Ti_3Al_2N_2$ can be synthesized by the direct nitriding method, although the ternary nitride coexist with TiN and AlN. The ternary nitrides are stable below $1400^{\circ}C$, but these are gradually decomposed into TiN and AlN above $1400^{\circ}C$.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.207-215
• /
• 1993

$Si_3N_4$ powders were mixed with sintering additives($3Y_2O_3{\cdot}5Al_2O_3$, YAG) by coprecipitation method. Mixing homogeneity, sintered and mechanical properties of coprecipitation-mixed powder compacts were compared with those of mechanically-mixed ones. SIMS-analysis for composition on the surface and in the matrix of prepared powder mixtures showed that the added YAG exists mainly on the $Si_3N_4$ powder surfaces in a form of coating. From this result it could be concluded that coprecipitation method is superior to mechanical mixing in the mixing homogeneity. This mixing homogeneity can accompany an improvement in sintered density, microstructure and consequently the mechanical properties of sintered bodys.