• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.2
• /
• pp.65-75
• /
• 1997

Removal characteristics of volatile organic carbons(VOCs) by ozone oxidation and other processes in the raw water of the 1st Nakdong water treatment plant were investigated. Dichrolomethane, toluene and other 7 compounds were detected in the raw water. With regard to detected 4 compounds in finally treated water, it was found that VOCs could not be removed effectively by traditional water treatment process. Benzene, 1,2-dichlorobenzne were not detected in the raw water but they were detected in the process of treatment. The compound of highest detection frequency was dichloromethane. When the raw water was controlled at pH 7, temperature $20^{\circ}C$, 5 minutes as contact time, 10 minutes as reaction time, the removal rate of THMFP, $KMnO_4$ demand, TOC, $UV_{254nm}$ and $NH_3-N$ were 46.4%, 22%, 19.6%, 31% and 8%, respectively. From estimating the finally treated water qualities in 7 kinds of treatment processes, P-6 process(raw water-chlorination-coagulation-ozonation) was most effective for organics removal and THMs control. Removal efficiencies for $KMnO_4$ demand and TOC by the process which combined preozonation with coagulation was twice better than only preozonation. $NH_3-N$ removal rate was shown as 10% by P-3 process(raw water-coagulation-ozonation), but 83% of $NH_3-N$ was removed by P-4 process(raw water-coagulation-chlorination). It was found that the chlorination is more effective than the ozonation for the NH3-N removal as commonly known.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.407-408
• /
• 2003

• Journal of Environmental Science International
• /
• v.15 no.8
• /
• pp.785-797
• /
• 2006

The formation characteristics of trihalomethanes (THMs) and haloacetic acids (HAAs) were investigated in chlorination of raw water of different organic mallet characteristics. The samples used in this study were hydrophobic (N-HPO) and hydrophilic fraction (N-HPI) (which were concentrated and separated from Nakdong river water), and humic acid (HA) (which is known as a strong hydrophobic acid) as a reference organic matter, the specific UV absorbance (SUVA) of which was 2.19, 1.15 and 7.92, respectively. With increasing chlorine contact time, THMFP and HAAFP (the formation potential of THMs and HAAs) increased, but their increase was different depending on the organic mallet characteristics (i.e., for N-HPI, THMFP was higher than HAAFP, but the inverse result was obtained for N-HPO and HA and the ratio between them was greater for HA), and the mainly formed chemical species were CHCI$_3$ in case of THMs and dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA) in case of HAAs for N-HPO and HA (and the ratios of CHCI$_3$ to total THMs and DCAA and TCAA to total HAAs for HA were higher than those for N-HPO), but for N-HPI, the ratio of brominated THMs was a little higher than that of CHCI$_3$ and the ratio of DCAA and TCAA to total HAAs was lower than that of N-HPO, although they are main chemical species in case of HAAs. Comparing THMFP and HAAFP with the increase in bromide concentration added with those in not adding it, the former increased greatly and its increase was higher for the organic mallet with stronger hydrophobicity, but the latter was lower for N-HPO and N-HPI and was similar for HA. The main chemical species with increasing bromide concentration were CHBt$_3$ in case of THMs regardless of organic matter characteristics, and dibromoacetic acid (DBAA) for N-HPO and N-HPI, DBAA and tribromoacetic acid (TBAA) for HA in case of HAAs. With increasing reaction temperature and pH, THMFP and HAAFP increased for the former, but for the latter, THMFP increased and HAAFP decreased, although the rate of increase or decrease was different with organic mallet characteristics.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.417-421
• /
• 2007

A successful rapid synthesis of dendritic benzyl chlorides from dendritic benzyl alcohols using methanesulfonyl chloride/$Et_3N$ as activating agents was described. In this method, each dendritic benzyl chloride can be prepared in one pot: no isolation of intermediate mesylated dendrons is required. The key steps in the syntheses of dendritic benzyl chlorides were the mesylation of the hydroxymethyl group followed by the chlorination by in-situ generated triethylammonium chloride.

• YAKHAK HOEJI
• /
• v.35 no.4
• /
• pp.288-294
• /
• 1991

A new fluorescent derivatizing reagent was developed to be used in HPLC for the trace determination of primary and secondary amines. This new reagent, 1-(N,N-dimethylamino)pyrene-6-sulfonyl chloride, was synthesized by the chlorination of sodium 1-(N,N-dimethylamino)pyrene-6-sulfonate which was obtained from 1-(N,N-dimethylamino)pyrene after sulfonation. Ephedrine and norephedrine were derivatized quantitatively by this reagent. The optimum conditions for the derivatization such as pH, reagent concentration, reaction time and reaction temperature ware examined. The structures of derivatives were identified by IR, $^{1}$H-NMR and MS methods. The fluorescence properties and the stability of the derivatives were examined. The derivatives were separated on silica column with an isocratic elution using the mixture of n-hexane and ethylacetate and monitored by fluorescene detector. Linear calibration curves were obtained and detection limits in a 10 $\mu$l injection volume were 5 picomole for ephedrine and norephedrine.

• Archives of Pharmacal Research
• /
• v.13 no.1
• /
• pp.78-81
• /
• 1990

N-Aryl-N'(4-hydroxy-6-methyl-2-pyrimidinyl)guanidines (IIa-c) were prepared by cyclization of N-arybiguanides (Ia-c) with ethyl acetoacetate. Coupling of compounds (IIa-c) with the appropriate diazotized arylamine gave N-aryl-N'-(5-arylhydrazono-6-methyl-4-oxopyrimidin-2-yl) guanidines (IIIa-f). Whereas, their chlorination with phosphorus oxychloride followed by treatment of N-aryl-N'-(4-Chloro-6-methyl-2-pyrimidinyl)guanidimes (IVac) with the appropriate arylamine afforded the corresponding 4-arylamino derivatives (Vaf). Compounds (IIa-f) were also formed when compounds (1a-c) were treated with ethyl 2-arylhydrazono-3-oxobutyrates. The antimircobial testing of some of the prepared compounds against some pathogenic microorganisms revealed that only two have a marked effect against Escherichia coli.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.57-62
• /
• 2009

N-Halamines are compounds which have covalent bonding between nitrogen and halogen. N-Halamine materials possess strong antimicrobial properties against wide spectrum of bacteria. The aim of this study is to prepare N-halamine membranes using m-aramid and poly(vinyl alcohol) (PVA). Surface characteristics using scanning electron microscope (SEM), pore size distribution, liquid permeability and mean pore size were measured to confirm feasibility as membrane. The results indicated that increased PYA portion up to 15% in the m-aramid/PVA blend resulted in improved pore size distribution, liquid permeability as well as mean pore size. Furthermore, antibacterial efficacy of the membranes after chlorination was confirmed and the results showed that bacteria in water were inactivated.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.3
• /
• pp.211-216
• /
• 1999

This study was conducted to recover the aluminum from water treatment plant sludge containing alumina. The optimum reaction conditions about chlorination of sludge with $NH_4Cl$ are as follows: the weight ratio of sludge to $NH_4Cl$ is 4, the reaction time is 60min, and the temperature is $300^{\circ}C$. And the result of leaching time test showed that the highest yield of alumina at $160^{\circ}C$ was 96% but the result of leaching test at $160^{\circ}C$ was little better than that of leaching test at $100^{\circ}C$ while the leaching concentration of HCl was 4N. The optimum reaction conditions of chlorinated sludge with $NH_4Cl$, gave the highest yield of 95.41% based on aluminum.

• Journal of Wetlands Research
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2014

The purpose of this study is to monitor the rainwater flowing from the roof of buildings and to maximize the effectiveness of the rainwater storage. This study also analyses the changes in rainwater characteristics before and after subsequent chlorination disinfection. The stored rainwater was disinfected by chlorine and then analyzed for COD, TN, TP, enteric bacteria, and general microbial population changes over time. There was an observed 99% reduction of enteric bacteria and common microbes within two weeks after chlorine injection. Thus, chlorine disinfection of rainwater improves water quality for long-term storage and future use.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.210-213
• /
• 1986

1,1-Dicyano-2-ethoxycyclobutane (1a) was prepared by [2 + 2] cycloaddition reaction of vinylidene cyanide with ethyl vinyl ether. 1,1-Dicyano-2-phenylcyclobutane (1b) was prepared by the reactions involving the reduction of cinnamyl alcohol, chlorination, cyanomethylation, bromination, and ring-closure reaction. Compound 1a was ring-opening polymerized with NaCN or n-butyllithium to give a low molecular weight polymer. The compound 1b however, failed to polymerize by either anionic or radical catalysts.