• Journal of the Optical Society of Korea
• /
• v.4 no.1
• /
• pp.7-10
• /
• 2000

The soft x-ray(10nm-100nm) interferometer is a modified Mach-Zehnder type interferometer and it consists of two beam-splitters and four totally reflecting mirrors. The beam-splitters used here are 50% transmission and 50% reflection grating type. The diffraction patterns of beam splitters(1st B.S.) were investigated with a He-Ne laser. The diffraction patterns produced by the soft x-ray interferometer (2nd B.S.) were also investigated in intensities positions. The diffraction patterns of 20 degree grazing incidence on the beam splitters(1st B.S.) show a circular array of spots. Both the reflected and the transmitted beams show the same patterns but symmetric circles on the screen. The maximum intensity appears roughly when n is in the zeroth and odd orders and the suppressed peak(missing order) appears when n is in even orders. Intensities of 3 center fringes(n = 0, $\pm$1) are stronger than others. These results confirm the reduced grating equation and make agree with the intensity distribution function. It was found that the final patterns produced by the soft x-ray interferometer (2nd B.S.) consisted of fine fringes which were caused by two of three diffraction beams that were arrived at the second beam-splitter.

• The Journal of Korean Physical Therapy
• /
• v.31 no.2
• /
• pp.111-116
• /
• 2019

Purpose: This study examined the effects of horse riding simulator exercise on the thickness changes in the transverse abdominis in normal adults. Methods: Forty-five healthy adults were recruited and randomized to a horseback riding simulation exercise group (n=15), a sling exercise group (n=15), and a trunk stabilization exercise group (n=15). A horseback riding simulator offers the indoor experience of horseback riding and mimics the rhythmic movement of horseback riding, thereby provided a virtual environment, such as riding a real horse on the front screen. The velocity of the horse riding simulator exercise was regulated within the subject's ability to control the exercise on the horse riding simulator. A sling exercise group performed sling exercise under the inspection of the experimenter. In the trunk stabilization exercise group, the subjects were instructed to perform the exercise accurately and pause the session when pain occurred during the intervention. The subjects in each group carried out the interventions three times per week for six weeks. The thickness of the transverse abdominis was measured using a pressure biofeedback unit and the ultrasound. Results: Significant differences in the thickness of transverse abdominis within the groups were observed between before and after the interventions. On the other hand, there were no differences in the parameters among the groups. Conclusion: Horse riding simulator exercise can be an alternative to trunk stabilization exercise by increasing the thickness of the transverse abdominis in healthy adults.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.344-348
• /
• 2015

The image data of the web camera is used to identify the construction status of the site in a remote office and it can be used for safety management. This study develops a construction schedule simulation system based on the active nD object linked with real image data of web camera from the construction site. The progress control method by 4D object uses a method that the progress of each activity is represented with different colors by progress status. Since this method is still based on a virtual reality object, it is less realistic description for practical engineers. Therefore, in order to take advantage of BIM more realistic, the real image of actual construction status and 4D object of planned schedule in a data date should be compared in a screen simultaneously. Those methodologies and developed system are verified in a case project where a web camera is installed for the verification of the system.

• Toxicological Research
• /
• v.24 no.1
• /
• pp.59-68
• /
• 2008

N-ethyl-N-nitrosoures (ENU) is effective in inducing hypermorphic mutation as well as hypomorphic and antimorphic mutations. Therefore, this mutagen is used to the production of mutant in the mice. In order to perform an effective ENU mutagenesis using BALB/cAnN mice, determination of optimal dosage and dosage regimen of ENU is necessary. And this study tried to develop a suitable screening method and searched for novel and various mutants as model animals in phenotypedriven ENU mutagenesis. We have carried out dosage regimen for mutagenizing dose of 200 mg/kg ENU in the BALB/c mice. Total screened mice were 30,133. As the results of Esaki and Cho's Phenotype Screening, we got 2,516 phenotypic and behavior abnormalities in $G_1,\;G_2\;and\;G_3$ mice. One hundred thirty five $G_1$ phenodeviants were tested for inheritance and 16 dominant mutants were discovered. Forty two recessive mutants were also found in tested 201 micropedigrees. Early-onset mutant mice included the dysmorphology of face, eye, tail, limb, skin, and foot and abnormal behavior like circling, swimming, head tossing, stiff-walking, high cholesterol level, and tremor etc. In this study we could effectively screen $G_3$ recessive mutants. The frequent and concise early-onset screening before weaning will be available for ENU mutagenesis.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.113-117
• /
• 1997

Simple sequence repeats (SSR) are widely dispersed throughout eukaryotic genomes, highly polymorphic, and easily typed using polymerase chain reaction (PCR). The objective of this study was to determine the polymorphism of different Chlamydomonas reinhartdtii strains and to determine the mode of inheritance of the SSR locus in Chlamydomonas. A genomic DNA library of C. reinhardtii was constructed and screened with a radiolabeled $(AC)_{11}$ probe for the selection of (CA/GT)n repeat clone. Selected clone was seqeuenced, and PCR primer set flanking (CA/GT)n sequence was constructed. PCR was used to specifically amplify the SSR locus from multiple isolates of C. reinhardtii. The locus was polymorphic in some of the C. reinhardtii isolates. However, the locus was amplified only 4 of 6 isolates of C. reinhardtii, not in other 2 isolates of C. reinhardtii, suggesting that this locus is not extensively conserved. A simple Mendelian inheritance pattern was found, which showed 2:2 segregation in the tetrads resulting from a cross between C. reinhardtii and C. smithii. Our results suggest that this simple sequence repeat DNA polymorphism will be useful for identity testing, population studies, linkage analysis, and genome mapping in Chlamydomonas.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.7
• /
• pp.589-593
• /
• 2011

[ $SnO_2$ ]nano powders were prepared by solution reduction method using tin chloride($SnCl_2{\cdot}2H_2O$), hydrazine($N_2H_4$) and NaOH. The $SnO_2$ thick films for gas sensors were fabricated by screen printing method on alumina substrates and annealed at $300^{\circ}C$ in air, respectively. XRD patterns of the $SnO_2$ nano powders showed the tetragonal structure with (110) dominant orientation. The particle size of $SnO_2$ nano powders at the ratio of $SnCl_2:N_2H_4$+NaOH= 1:6 was about 60 nm. The sensing characteristics were investigated by measuring the electrical resistance of each sensor in a test box. Sensitivity of $SnO_2$ gas sensor to 5 ppm $CH_4$gas and 5 ppm $CH_3CH_2CH_3$ gas was investigated for various $SnCl_2:N_2H_4$+NaOH proportion. The highest sensitivity to $CH_4$ gas and $CH_3CH_2CH_3$ gas of $SnO_2$ sensors was observed at the $SnCl_2:N_2H_4$+NaOH= 1:8 and $SnCl_2:N_2H_4$+NaOH= 1:6, respectively. Response and recovery times of $SnO_2$ gas sensors prepared by $SnCl_2:N_2H_4$+NaOH= 1:6 was about 40 s and 30 s, respectively.

• Applied Biological Chemistry
• /
• v.40 no.5
• /
• pp.447-450
• /
• 1997

Eighteen N-substituted phenyl 1, 3, 5-trimethylpyrazole-4-carboxamides were synthesized to screen for their mycelial growth inhibition activity against Rhizoctonia solani $K{\ddot{u}}hn$ $(pEC_{50})$ and to measure enzymatic inhibition activity of these compounds $(pI_{50})$ against succinate dehydrogenase (SDH) isolated from Rhizoctonia solani $K{\ddot{u}}hn$ A structure-activity relationship formulated by regression analysis showed that 79% of the variance in mycelial growth inhibition activity can be explained with SDH inhibition activity and chromatographic capacity factor $(\acute{k})$ as a hydrophobic parameter related to the penetration and transport processes in the biological system.

• Journal of Ginseng Research
• /
• v.45 no.1
• /
• pp.156-162
• /
• 2021

Background: It is estimated that 20-30% of ginseng crops in Canada are lost to root rot each harvest. This disease is commonly caused by fungal infection with Ilyonectria, previously known as Cylindrocarpon. Previous reports have linked the virulence of fungal disease to the production of siderophores, a class of small-molecule iron chelators. However, these siderophores have not been identified in Ilyonectria. Methods: High-resolution LC-MS/MS was used to screen Ilyonectria and Cylindrocarpon strain extracts for secondary metabolite production. These strains were also tested for their ability to cause root rot in American ginseng and categorized as virulent or avirulent. The differences in detected metabolites between the virulent and avirulent strains were compared with a focus on siderophores. Results: For the first time, a siderophore N,N',N"-triacetylfusarinine C (TAFC) has been identified in Ilyonectria, and it appears to be linked to disease virulence. Siderophore production was suppressed as the concentration of iron increased, which is in agreement with previous reports. Conclusion: The identification of the siderophore produced by Ilyonectria gives us further insight into the root rot disease that heavily affects ginseng crop yields. This research identifies a molecular pathway previously unknown for ginseng root rot and could lead to new disease treatment options.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.68-73
• /
• 2016

Silver nanoparticles were prepared by chemical reduction-protection method using 1-decanoic acid and tri-n-octylphosphine as surfactants, and using $NaBH_4$ as a reducing agent. The silver nanoparticles were also studied for their formation, structure, morphology and size using UV-Visible spectroscopy, XRD, TEM and SEM. Further the viscosity of the silver paste and the surface resistance of the silver metal film produced by screen coating onto a PET film were investigated. Well dispersed and quasispherical silver nanoparticles with the size of 10-200 nm were obtained under the optimal molar ratio of $NaBH_4/AgNO_3=1:5$. The surface resistance of silver metal film coated on the PET film made with the silver nanoparticles under the optimal molar ratio showed a minal value of $41{\mu}{\Omega}/cm^2$.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.3
• /
• pp.150-155
• /
• 2010

Generally, plasma nitriding process has composed with a nitriding layer within glow discharge region occurred by energy exchange. The dissociations of nitrogen molecules are very difficult to make neutral atoms or ionic nitrogen species via glow discharge area. However, the captured electrons in which a double-folded screen with same potential cathode can stimulate and come out some single atoms or activated ionic species. It was showed an important thing that is called "hat is a dominant component in this nitriding process?" in plasma nitriding process and it can take an effective species for without compound layer. During a plasma nitriding process, it was able to estimate with analyzing and identification by optical emission spectroscopy (OES) study. And then we can make comparative studies on the nitrogen transfer with plasma nitriding and ATONA process using plasma diagnosis and metallurgical observation. From these observations, we can understand role of active species of nitrogen, like N, $N^+$, ${N_2}^+$, ${N_2}^*$ and $NH_x$-radical, in bulk plasma of each process. And the same time, during DC plasma nitriding and other processes, the species of FeN atom or any ionic nitride species were not detected by OES analyzing.