• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.131-135
• /
• 2006

A seismic waveform inversion for prestack seismic data based on the Gauss-Newton method is presented. The Gauss-Newton method for seismic waveform inversion was proposed in the 80s but has rarely been studied. Extensive computational and memory requirements have been principal difficulties. To overcome this, we used different sizes of grids in the inversion stage from those of grids in the wave propagation simulation, temporal windowing of the simulation and approximation of virtual sources for calculating partial derivatives, and implemented this algorithm on parallel supercomputers. We show that the Gauss-Newton method has high resolving power and convergence rate, and demonstrate potential applications to real seismic data.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.419-425
• /
• 2008

In previous study, it was reported that the anomalous skin effect should be considered in the low pressure condition(<10 mTorr). However there is the problem that the filament type antenna model of which size is 0 makes the non-physical phenomena that the electric field at the antenna point is infinite. Therefore, in this work, using the surface current model the electric field in antenna region is calculated and compared with the case of filament type antenna model in various conditions.

• Korean Journal of Childcare and Education
• /
• v.8 no.3
• /
• pp.53-67
• /
• 2012

This study was to focus on the effect on parenting stress of children's developmental characteristics, emotionality and mother's self-efficacy, thus to set the structure equation model. Analysis data was collected from 2078 newborns to be involved Korea Children's Panel 1st year. The valuables were all measured by mothers. The main results of this study were as follows. First, children's developmental characteristics and emotionality had an effect on parenting stress directly. A lower level of children's developmental characteristics and a higher level of children's emotionality indicated a higher maternal parenting stress level. Second, mother's self-efficacy also had an effect on parenting stress level. A lower level of maternal self-efficacy demonstrated a higher level of maternal parenting stress level. Third, children's developmental characteristics and emotionality had an effect on parenting stress indirectly through mother's self-efficacy. Mother's self-efficacy which was affected by children's developmental characteristics and emotionality aggravated mother's parenting stress. The implication of these findings are also discussed.

• Korean Journal of Child Education & Care
• /
• v.18 no.2
• /
• pp.203-215
• /
• 2018

The purpose of this study was to investigate the structural relationship among preschool children's attachments, preschool children's temperaments and children's playfulness. Participants of this study were 275 child care teachers and preschool child mother's from U-city. The collected data were analyzed by structure equation model analysis using SPSS and AMOS program. Fitness was evaluated using the ${\chi}^2$, RMSEA, NNFI, CFI, and SRMR. The results of this study were as follows. First, there was a positive correlation between preschool children's attachments and preschool children's playfulness, and a positive correlation between preschool children's temperaments and preschool children's playfulness. Second, preschool children's attachments had a significant direct effect on preschool children's playfulness and preschool children's temperaments also had a significant indirect effect on preschool children's playfulness.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.21-27
• /
• 2020

This paper studies the impact of domestic and foreign economic activity on mobility among regions. The shortage of human resources and demand continues in Eastern Europeans. Especially Ukrainians, have entered the Polish labor market to make up for the scarce areas. As a result, Poland's supply and demand in Ukraine is disproportionate. Minimum wage increases are putting continued pressure on employers. Therefore, the regression equation in the form of job-seeker's economic activity ratio, y= AX²+B,(x=settlers) can be used to grasp the relationship between curves. According to the domestic and foreign workers who migrated, economic activities was rather than increasing the local population, the settlers of nearby large cities is more proportional. Empirical analysis has shown that the human resource hub has increased migration to large cities and industrial. The hub 'A'nation has been created for mobility in 4th wave re-industry, and the same re-industrialization (N₂) in other cities has attracted nearby human resources, but not settle. After all, the hub relationship between N₁ and N₂ is a mobile relationship. Due to wage inequality or a positive wellbeing chasm, workers are not settled plant area but a nearby city, or commuting between borders is easy to go into the hub central city. However, this proved on emerging from the relatively temporary settlers in the AI era.

• Journal for History of Mathematics
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2011

In Tian mu bi lei cheng chu jie fa(田畝比類乘除捷法) of Yang Hui suan fa(楊輝算法)), Yang Hui annotated detailed comments on the method to find roots of quadratic equations given by Liu Yi in his Yi gu gen yuan(議古根源) which gave a great influence on Chosun Mathematics. In this paper, we show that 'Zeng cheng kai fang fa'(增乘開方法) evolved from a process of binomial expansions of $(y+{\alpha})^n$ which is independent from the synthetic divisions. We also show that extending the results given by Liu Yi-Yang Hui and those in Suan xue qi meng(算學啓蒙), Chosun mathematican Hong Jung Ha(洪正夏) elucidated perfectly the 'Zeng cheng kai fang fa' as the present synthetic divisions in his Gu il jib(九一集).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.291-302
• /
• 2005

Due to the importance of the parameter in structural response, the uncertain elastic modulus was located at the center of stochastic analysis, where the response variability caused by the uncertain system parameters is pursued. However when we analyze the so-called stochastic systems, as many parameters as possible must be included in the analysis if we want to obtain the response variability that can reach a true one, even in an approximate sense. In this paper, a formulation to determine the statistical behavior of in-plane structures due to multiple uncertain material parameters, i.e., elastic modulus and Poisson's ratio, is suggested. To this end, the polynomial expansion on the coefficients of constitutive matrix is employed. In constructing the modified auto-and cross-correlation functions, use is made of the general equation for n-th moment. For the computational purpose, the infinite series of stochastic sub-stiffness matrices is truncated preserving required accuracy. To demons4rate the validity of the proposed formulation, an exemplary example is analyzed and the results are compared with those obtained by means of classical Monte Carlo simulation, which is based on the local averaging scheme.

• The Journal of Engineering Geology
• /
• v.15 no.3
• /
• pp.337-348
• /
• 2005

Jurassic granite from Pocheon area were tested to investigate the effect of microcracks on mechanical properties of the granite. Three oriented core specimens were used for uniaxial compressive tests and each core specimen are perpendicular to the axes'R'(rift plane),'c'(grain plane) and'H'(hardway plane), respectively Among vacious elastic constants, the variation of Poisson's ratio as function of the directions was examined. From the related chart between ratio of failure strength and Poisson's ratio, H-specimen shows the highest range in Poisson's ratio and Poisson's ratio decreases in the order of C-specimen and R-specimen. The curve pattern is nearly linear in stage $I\simIII$ but the slope increases abruptly in stage H-3. As shown in the related chart, diverging point of a curve is formed when ratio of failure strength is $0.92\sim0.96$ Stage IV -3 is out of elastic region. The behaviour of rock in the four fracturing stages was analyzed in term of the stress-volumetric strain me. From the stress increment-volumetric strain equations governing the behaviour of rock, characteristic material constants, a, n, Q, m and $\varepsilon_v^{mcf}$, were determined. Among these, inherent microcrack porosity$(a, 10^{-3})$ and compaction exponent(n) in the microcrack closure region(stage I ) show an order of $a^R(3.82)>a^G(3.38)>a^H(2.32)\;and\;n^R(3.69)>n^G(2.79)>n^H(1.99)4, respectively. Especially, critical volumetric microcrack strain($\varepsilon_v^{mcf}$) in the stage W is highest in the H-specimen, normal to the hardway plane. These results indicate a strong correlation between two major sets of microcracks and mechanical properties such as Poisson's ratio and material constants. Correlation of strength anisotropy with microcrack orientation can have important application in rock fracture studies.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.2
• /
• pp.171-186
• /
• 2009

Various Earth-Moon transfer trajectories are designed and analyzed to prepare the future Korea's Lunar missions. Minimum fuel trajectory solutions are obtained for the departure year of 2017, 2020, 2022, and every required mission phases are analyzed from Earth departure to the final lunar mission orbit. N-body equations of motion are formulated which include the gravitational effect of the Sun, Earth and Moon. In addition, accelerations due to geopotential harmonics, Lunar J2 and solar radiation pressures are considered. Impulsive high thrust is assumed as the main thrusting method of spacecraft with launcher capability of KSLV-2 which is planned to be developed. For the method of injecting a spacecraft into a trans Lunar trajectory, both direct shooting from circular parking orbit and shooting from the multiple elliptical intermediate orbits are adapted, and their design results are compared and analyzed. In addition, spacecraft's visibility from Deajeon ground station are constrained to see how they affect the magnitude of TLI(Trans Lunar Injection) maneuver. The results presented in this paper includes launch opportunities, required optimal maneuver characteristics for each mission phase as well as the trajectory characteristics and numerous related parameters. It is confirmed that the final mass of Korean lunar explorer strongly depends onto the initial parking orbit's altitude and launcher's capability, rather than mission start time.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.20-29
• /
• 1998

This paper proposes the algorithms that design the highly parallel multiple-valued logic curcuit and assign the code to each node of DCG(Directed Cyclic Graph) of length 1. The conventional Nakajima's algorithm have some problems, so this paper introduce the matrix equation from DCG of length 1 and proposes circuit design algorithms according to the DCG of length 1. Using the proposed circuit design algorithms in this paper, it become realized that was not able to design from Nakajima's algorithm. Also, making a comparision between the circuit design using Nakajima's algorithm and this paper's, we testify that proposed paper's algorithm is able to realize more optimized circuit design. According to proposed curcuit design algorithm in this paper, it is possible to design curcuit that DCG have natural number, so it have the following advantages; reduction of the curcuit input/output digits, simplification of curcuit composition, reduction of computation time and cost. And we show compatibility and verification about this paper's algorithm.