• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.3
• /
• pp.53-62
• /
• 1986

For the research on the fatigue fracture behavior in the welded joints of steel structures, base metal specimens and welded ones were selected, and the direct fatigue tests were carried out. Thereafter, fatigue-life (S-N) curves, plastic strain-number of cycles (${\varepsilon}_p$-N) curve, the extrapolated fatigue-life (${\varepsilon}_p$-$N_c$) curve, and da/dN-${\Delta}K$ curves were plotted. By these results the followings were obtained. It was shown that the ratio of fatigue strength at $2{\times}10^6$ cycles of the welded specimen to that of the base metal one was 0.6, and that 0.72 for the base metal and 0.65 for the welded one were the ratio of fatigue strength at $2{\times}10^6$ cycles to yielding stress. The S-N curve for the welded specimen was separated into two sections, the low gradient section and the steep section. As this result, it was shown that the more stress became to reduce, the more the reduction of fatigue strength became to be great. It was shown that fatigue strength at $2{\times}10^6$ cycles from this case was about 83 % of that from the S-N curve plotted with one section. It was thought that the reason was that weld flaw acted greatly on the fatigue strength within the low stress range. It was shown that at the instart of crack initiation plastic strain increased abrupt1y in the case of the welded specimen more than the case of the base metal specimen, and increased abruptly in the upper stress range in both cases. It was shown that the experimental constant ${\alpha}$, 0.42, in the base metal nearly accorded with Manson-Coffin's result, but this made a great difference with the case in the welded specimen. It was thought that it was due to the abrupt change of plastic strain and the influence of weld flaw.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.108-108
• /
• 1998

최근의 GaN에 관한 연구는 주로 MOCVD법과 MBE법이 이용되고 있으며 대부분 800¬1$\alpha$)()t 정도의 고옹에서 이루어지고 었다. 그러나 이러한 고온 성장은 GaN 성장 과청에서 질 소 vacancy를 생성시켜 광특성을 저하시키고 청색 발광충인 InGaN 화합물에 In의 유입울 어 렵게 하며 저온에서보다 탄소 오염이 증가하는 동의 문제캠을 가지고 있다. 이러한 고온 생장 의 문제점을 해결하기 위한 방법중의 한 가지로 제시되고 있는 것이 저온 성장법이다. 본 연구 에 사용된 RPE-UHVCVD법은 Nz률 rf plasma로 $\sigma$acking하여 공급함으로써 NI-h롤 질소원으 로 사용하는 고온 성장의 청우와는 다르게 온도에 크게 의존하지 고 질소원올 공급할 수 있 어 저옹 성장이 가능하였다. 기판으로는 a - Alz03($\alpha$)()1)를 사용하였고 3족원은 TEGa(triethylgallium)이며,5족원으로는 6 6-nine Nz gas를 rf plasma로 cracking하여 활성 질소원올 공급하였다 .. Nz plasma로 질화처리 를 한 sapphire 표면 위에 G따애 핵생성충을 성장 옹도(350 t, 375 t, 400 t)와 성장시간(30 분,50 분) 그리고 VIllI비(1$\alpha$)(), 2뼈)둥을 변화시키면서 성장시킨 후 GaN 에피택시충을 450 $^{\circ}C$에서 120 분 동안 성장시켰다 .. XPS(x-ray photoelectron spectroscopy), XRD(x-ray d diffraction), AFM(atomic force microscope)둥올 이용하여 표면의 조성 및 morphology 변화와 결정성을 관찰하였다. X XPS 분석 결과 질화처리를 한 sapphire 표면에는 AlN가 형성되었다는 것을 확인 할 수 있 었으며 질화처리를 한 후 G따J 핵생성충올 성장시킨 경우에 morphology 변화를 AFM으로 살 펴본 결과 표면에 facet shape의 island가 형성되었고 이러한 결파는 질화처리 과청이 facet s shape의 island 형성을 촉진시킨다는 것을 알 수 있었다. 핵생성충의 성장온도가 중가함에 따 라 island의 모양은 round shape에서 facet shape으로 변화하였다. 이러한 표면의 morphology 변화와 GaN 에피택시충의 결정성과의 관계를 살펴보면 GaN 에피택시충 표면의 rms(root m mean square) roughness가 중가하는 경 우 XRD (j -rocking curve의 FWHM(full width half m maximum) 값이 감소하는 것으로 나타났다. 이러한 현상은 결정성의 향상이 columnar 성장과 관계가 었다는 것올 알 수 있었다 .. columnar 성장은 결함의 밀도가 낮은 column의 형생과 G GaN 에피택시충의 웅력 제거로 인해 G값{의 결정성을 향상시킬 수 있는 것으로 생각된다. 톡 히 고온 성장의 경우와는 달리 rms roughness의 중가가 100-150 A청도로 명탄한 표면올 유 지하면서 결정성을 향상시킬 수 있었다. 본 실험에서는 핵생성충올 375 t에서 30 분 생장시킨 경우에 hexagonal 모양의 island로 columnar 성장을 하였고 GaN 에피태시충의 결정성도 가장 향상되었다 이상의 결과로부터 RPE-UHVCVD법용 이용한 GaN 저온 성장에서도 GaN의 결청성올 향 상시킬 수 있음융 확인할 수 있었다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.59-65
• /
• 2009

Adsorption of an oil-proof agent (OPA）onto cellulose fibers during the papermaking process was investigated using UV-Vis spectrophotometry by measuring the OPA concentration decrease in the solution. From the calibration curve, the spectrum were converted to chemical concentrations in solution, from which the amount adsorbed onto the fiber surface could be determined. Thus, it was possible to determine the total amount adsorbed onto the fibers and in solution. Using this approach, we studied the adsorption behavior of the OPA onto the fiber surface and derived its, ${\Gamma}^s_t={\Gamma}^s_{\infty}(1-e^{-k_{\alpha}t})$. The values of the parameters kaand ${\Gamma}^s_{\infty}$ were determined using a mathematic model based on a mass transfer equation. Ultimately, a complete was derived: $Q={\alpha}{\cdot}\sum\limits_{i-1}^m{\pi}d_il_i{\cdot}M_A{\cdot}(1-e^{-k_{\alpha}t})/A_N$.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.210-219
• /
• 2000

The magnetoresistance characteristics of FeN/Co/Cu/Co and FeN/Co/Cu/Co/Cu/Co/FeN multilayers using ferromagnetic iron-nitrides (FeN) has been studied. The microstructure of FeN film is the mixed ${\alpha}$-Fe and $\varepsilon$-Fe$_3$N phase on the condition that the flow rate of N$_2$ gas is over 0.4 sccm. The magnetoresistance effect is observed because of shape magnetic anisotropy induced by needle-shaped $\varepsilon$-Fe$_3$N phase. This magnetoresistance effect changes, because the degree that the shape magnetic anisotropy adheres to the adjacent Co pinned layer is varied according to the flow rate of N$_2$ gas and the thickness of FeN film. The best magnetoresistance effect is obtained on the condition that the thickness of Co free layer is 70 ${\AA}$ and the maximum MR ratio(%) value of 3.2% shows in the FeN(250 ${\AA}$)/Co(70 ${\AA}$)/Cu(25 ${\AA}$)/Co(70 ${\AA}$)/Cu(25 ${\AA}$)/Co(70 ${\AA}$)/FeN(250 ${\AA}$) mutilayer film which is fabricated at the N, gas flow rate of 0.5 sccm and the FeN film thickness of 250 ${\AA}$. Four steps are observed in the magnetoresistance curve owing to this difference of coercive force, because respective magnetic layers in the multilayer possess different coercive forces. These effects observed in these mutilayer films can be expected to application to the memory device the same MRAM as can carry out simultaneously four signals.

• Nutrition Research and Practice
• /
• v.4 no.2
• /
• pp.99-105
• /
• 2010

Obesity is considered a mild inflammatory state, and the secretion of inflammation-related cytokines rises as adipose tissue expands. Inflammatory cytokines, including tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$), interlukin 6 (IL-6) and monocyte-chemoattractant protein 1 (MCP-1), are modulated by adipose tissue and known to play an important role in insulin resistance which is the common characteristics of obesity related disorders. In this study we analyzed the effects of Sasa borealis leaves extract on inflammatory cytokines and insulin resistance in diet induced obese C57/BL6J mice. The obese state was induced by a high fat diet for 20 weeks and then the mice were divided into two groups; obese control group (OBC, n = 7) and experimental group (OB-SBE, n = 7). The OBC group was fed a high fat diet and the OB-SBE group was fed a high fat diet containing 5% Sasa borealis leaves extract (SBE) for 12 weeks. We also used mice fed a standard diet as a normal control (NC, n = 7). The body weight and adipose tissue weight in the OB group were significantly higher than those in the NC group. The effects of the high fat diet were reduced by SBE treatments, and the body weight and adipose tissue deposition in the OB-SBE group were significantly decreased compared to the OBC group. The OBC group showed higher serum glucose and insulin levels which resulted in a significant increase of incremental area under the curve (IAUC) and HOMA-IR than the NC group. Also, serum leptin, TNF-${\alpha}$, and IL-6 levels were significantly higher in the OBC group than in the NC group. In contrast, the OB-SBE group showed a reversal in the metabolic defects, including a decrease in glucose, insulin, IAUC, HOMA-IR, TNF-${\alpha}$, IL-6 and leptin levels. These results suggest that BSE can suppress increased weight gain and/or fat deposition induced by a high fat diet and theses effects are accompanied by modulation of the inflammatory cytokines, TNF-${\alpha}$ and IL-6 secretion resulting in improved insulin resistance.

• Journal of Chest Surgery
• /
• v.39 no.11 s.268
• /
• pp.828-837
• /
• 2006

Background: Tissue hypoxia is characteristic of many human malignant neoplasm, and hypoxia inducible factor-1(HIF-1) plays a pivotal role in essential adaptive response to hypoxia, and activates a signal pathway for the expression of the hypoxia-regulated genes, resulting in increasing $O_2$ delivery or facilitating metabolic adaptation to hypoxia. Increased level of HIF-$1{\alpha}$ has been reported in many human malignancies, but in non-small cell lung carcinoma the influence of HIF-$1{\alpha}$ on tumor biology, including neovascularization, is not still defined. In present study the relationship of HIF-$1{\alpha}$ expression on angiogenetic factors, relationship between the tumor proliferation and HIF-$1{\alpha}$ expression, interaction of HIF-$1{\alpha}$ expression and p53, and relationship between HIF-$1{\alpha}$ expression and clinico-pathological prognostic parameters were investigated. Material and Method: Archival tissue blocks recruited in this study were retrieved from fifty-nine patients with primary non-small cell lung carcinoma, who underwent pneumonectomy or lobectomy from 1997 to 1999. HIF-$1{\alpha}$, VEGF(vascular endothelial growth factor), and p53 protein expression and Ki-67 labeling index in tumor tissues were evaluated, using a standard avidin-biotin-peroxidase complex(ABC) immunohistochemistry. Relationship between the HIF-$1{\alpha}$ expression and VEGF, p53 overexpression and correlation between the HIF-$1{\alpha}$ expresseion and Ki-67 index were analyzed. Clinico-pathologic prognostic parameters were also analyzed. Result: HIF-$1{\alpha}$ expression in cancer cells was found in 24 of 59 cases of non-small cell lung carcinoma(40.7%). High HIF-$1{\alpha}$ expression was significantly associated with several pathological parameters, such as pathological TMN stage(p=0.004), pT stage(p=0.020), pN stage (p=0.029), and lymphovascular invasion(p=0.019). High HIF-$1{\alpha}$ expression was also significantly associated with VEGF immunoreactivity(p<0.001), and aberrant p53 expression(p=0.040). but was marginally associated with Ki-67 labeling index(p=0.092). The overall 5-year survival rate was 42.3%. The survival curve of patients with a high HIF-$1{\alpha}$ expression was worse than that of patients with low-expression(p=0.002). High HIF-$1{\alpha}$ expression was independent unfavorable factors with a marginal significance in multivariate analysis performed by Cox regression. Conclusion: It is suggested that high HIF-$1{\alpha}$ expression may be associated with intratumoral neovascularization possibly through HIF-VEGF pathway, and high HIF-$1{\alpha}$ expression could be associated with lymph node metastasis and post operative poor prognosis in patients with non-small cell lung carcinoma.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.1 s.14
• /
• pp.13-16
• /
• 2006

AIN thin films were prepared on amorphous glass and $SiO_2(1{\mu}m)/Si(100)$ substrate by the facing targets sputtering (FTS) apparatus, which can provide high density plasma, a high deposition rate at a low working gas pressure. The AIN thin films were deposited at a different nitrogen gas flow rate ($1.0{\sim}0.3$) and other sputtering parameters were fixed such as sputtering power of 200w, working pressures of 1mTorr and AIN thin film thickness of 800 nm, respectively. The thickness and crystallographic characteristics of AIN thin films as a function of $N_2$ gas flow rate $[N_2/(N_2+Ar)]$ were measured by $\alpha$-step and an X-ray diffraction (XRD) instrument. And the c-axis preferred orientations were evaluated by rocking curve. In the results, we could prepared the AIN thin film with c-axis preferred orientation of about $5^{\circ}$ on substrate temperature R.T. at nitrogen gas flow rate 0.7.

• The Journal of Engineering Geology
• /
• v.22 no.2
• /
• pp.145-155
• /
• 2012

The matric suction and volumetric water content of Jumunin standard sand with a relative density of 60% were measured using an Automated Soil-Water Characteristic Curve (SWCC) apparatus during both drying and wetting processes. The test time for the drying process was longer than that for the wetting process, because the flow of water is likely to be protected by air trapped in voids within the soils during the drying process. Based on the matric suction and volumetric water content, the SWCC was estimated using the model proposed by van Genuchten (1980). For the drying process, the unsaturated fitting parameters ${\alpha}$, n, and m were 0.399, 8.586, and 0.884, respectively; for the wetting process, the values were 0.548, 5.625, and 8.220, respectively. The hysteresis phenomenon occurred in the SWCCs, which means the SWCC of the drying process is not matched with the SWCC of the wetting process. Using these unsaturated parameters, we estimated the Suction Stress Characteristic Curve (SSCC), based on the relationship between suction stress and the effective degree of saturation. The suction stress showed a rapid decrease when the matric suction exceeds the Air Entry Value (AEV). Therefore, the effective stress of unsaturated soils is different from that of saturated soils when the matric suction exceeds the AEV. The suction stress of the drying process exceeds that of the wetting process for a given effective degree of saturation. The hysteresis phenomenon was also recognized in SSCCs. The hysteresis phenomenon of SSCCs arises from that of SWCCs, which is induced by the ink bottle effect and the contact angle effect. In the case of a sandy slope, the suction stress is positive and acts to enhance the slope stability as the water infiltrates the ground, but is negative when the suction stress exceeds the AEV. The results obtained for the wetting process should be applied in analyses of slope stability, because the process of water infiltration into ground is similar to the wetting process.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1102-1104
• /
• 1995

This study presents the results of an investigation on the electrical characteristics of $PVF_2$ film, to be regarded as the excellent piezo and pyroelectricity, using dielectric relaxation technique by the variation of temperature and frequency. As one of the results, we confirmed that crystal form with Infrared absorption and XRD was ${\alpha}$ type and its crystalline was 59[%]. Also, the results of observation conformed to Debye theory for frequency variation of relative permitivity and dielectric relaxation. Especially, we confirmed each constant values in comparision with equation related to diffusion behavior of ion, so we obtained that activation energy was computed 17.25[kcal/mole] from the relation curve with frequency and temperature.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.128-133
• /
• 1997

Due to their high strength and good wear resistance, nitro-carburizing materials have been used for many machine components. However, the nitro-carburizing materials are found to have one disadvantage ; that is, their strength and fatigue life show larger scatter than those of non-heated metals. In this paper, therfore, the statistical chracteristics of non-heated and nitro-carburized specimens for SCM415 are investi- gated under two different of stress levels 1.15 .sigma. /sub .omega. / .leq. / .sigma. / sub .alpha. / .leq. / 1.25 .sigma. /sub .omega. /. Seven specimens at each stress level are tested by using rotating bending fatigue tester. The relation between a crack length and fatigue cycles can be arranged for Weibull distribution, and S-N curve using 95% reliability function is obtalined for nitro-carburized specimen.