• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.2
• /
• pp.169-179
• /
• 1998

This paper was performed to estimate interrelations between humus level of sediments and nutrient release from sediments in Dae-cheong reservoir. For investigations, sediments were sampled in June and October, in 1997 at fish farms, embayment, and the main stream of Dae-cheong reservoir. Items for investigation are as follows; water content, weight loss on ignition(IG), porosities of sediments, contents of element such as hydrogen, nitrogen, carbon, and nutrient release rates. Water contents and porosities were measured to conjecture the physical trait and grain size trait. Weight loss on ignition was measured to determine the contents of organic substance. For determination of the humus level of sediments, carbon and nitrogen contents were measured by elemental analyzer. As a result of elemental analysis, C/N ratio was determined in the range of $3.0\~13.1$. From the elemental analysis, humus level of Dae-cheong reservoir sediment was estimated from mesohumic state to oligotrophic state. For the determination of nutrient release rate, $PO_4-P$ and $NH_4-N$ concentrations of interstitial water and overlying water were measured. By using the concentration difference between interstitial water and overlying water and using the Fick's diffusion law, the release rates of phosphorus and nitrogen from the sediment samples were calculated. Release rates of nutrients which directly influence to the water quality were $0.05\~8.63mgP/m^2day$ and $4.99\~36.56mgP/m^2day$. It was found that release rate was measured higher in the 1st sampling period than in the 2nd sampling period. For the determination of phosphorus content in sediment, TPs were measured in 807\~1542{\mu}g/g$ in the 1st samling period and $677\~5238{\mu}g/g$ in the End samling period. Phosphorus release rate and phosphorus content were not interrelated each other.

• Environmental Mutagens and Carcinogens
• /
• v.22 no.4
• /
• pp.229-235
• /
• 2002

Thimerosal, a widely used preservative, has been well known to induce intracellular calcium mobilization in various cell types. However, the mechanism of its calcium mobilization is not clearly understood yet. For studying the mechanism of thimerosal-mediated calcium release, we have used HL60 cells in calcium-free Lockes solution that has no extracellular calcium. Thimerosal significantly reduced the lag period of initial calcium release whereas it enhanced the rate and magnitude of the calcium release in a dose-dependent manner. At the same time, we found that thimerosal generated superoxide anion by activating NADPH oxidase in dose- and time-dependent manner. Interestingly, the kinetics and the dosedependency of superoxide anion generation were very similar to those of intracellular calcium mobilization. In inhibitors study, the thimerosal-induced superoxide anion generation was significantly suppressed by DMSO as well as superoxide dismutase but not by genistein or EGTA. Surprisingly, the pretreatment with N-Acetyl-$_{L}$-Cysteine blocked almost completely the thimerosal-induced calcium increase, indicating that ROS playa key role in the calcium mobilization. The present results suggest that thimerosal-induced calcium mobilization is possibly mediated by the activation of NADPH oxidase and subsequent ROS generation.n.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.2
• /
• pp.149-153
• /
• 1992

The applicability of sodium alginate as a carrier of 5-fluorouracil as an oral delivery system was investigated. Hydrophobicity of sodium alginate was controlled by introducing cetyl group to this polymer. The effects of degree of esterification for n-cetyl partial ester on the rate of release of 5-fluorouracil in artificial gastric juice and artificial intestinal juice were examined. The release rete of the drug in the gastric juice was mainly affected by the diffusion of the drug. The release rate of the drug in the intestinal juice could be controlled by the degree of esterification. The alginate matrices may be a valuable addition as the carrier of 5-fluorouracil for an oral delivery system.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.18-25
• /
• 2020

In this study, the heat release rate of pipe insulation is analyzed by considering the installation status in accordance with the standards ISO 20632 and NFPA 274. The flame retardation rate was evaluated for six types of test samples: polyethylene foam covered with beaten silver (PE(S)), PE foam tapped (PE(N)), elastomeric closed cell thermal insulation (rubber), Japanese PE foam (PE(J)), Japanese polyurethane foam (PU(J)), and Japanese styro form (ST(J)) by EN 13501-1 and fire growth curve. The results show that PU(J), PE(J), and PE(N) were Class E and ultra-fast, NFPA 274 test standards for Class D and Fast, and PE(S) by ISO 20632 were Class C and Slow, and Rubber and ST(J) were Classes and Low. However, the changes in the time-averaged maximum heat release rate for each test standard (ISO 20632 and NFPA 274) to evaluate the flame retardation rate differed among identical materials. This means that the fundamental study is necessary to analyze the more accurate reasons.

• Archives of Pharmacal Research
• /
• v.10 no.2
• /
• pp.88-93
• /
• 1987

Chitosan ($\beta$-D-glucosaminan) is chemically prepared from chitin (N-acetyl-$\beta$- D-glucosaminan) which is an unutilized natural resource. We now report on the suitability of the chitosan matrix for use as vehicles for the controlled release of drugs. Salicylic acid and aspirin were used as model drugs in this study. The permeation of salicylic acid in the chitosan membranes was determined in a glass diffusion cell with two compartments of equal volume. Drug release studies on the devices were conducted in a beaker containing 5% sodium hydroxide solution. Partition coefficient (Kd) value for acetate membrane (472) is much greater than that for fluoro-perchlorate chitosan membrane (282). Higher Kd value for acetate chitosan membrane appears to be inconsisstent with the bulk salicylic acid concentration. The permeability constants of fluoro-perchlorate and acetate chisotan membranes for salicylic acid were 3.139 ${\times}10^{-7}cm^2$ min up to 60 min and that of 30% aspirin in the devices was 4.739${\times}10^{-7}cm^2$sec upto 60 min. As the loading dose of aspirin in a chitosan device increased, water up-take of chitosan device increased, but in case of salicylic acid it decreased. The release rate increased with increase in the molecular volume of the drugs. Thses result suggest that the release mechanism may be controlled mainly by diffusion through pores.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.1
• /
• pp.1-12
• /
• 1997

As it has been reported that the depolarization induced acetylcholine (ACh) release is modulated by activation of presynaptic $A_1$ adenosine heteroreceptor and various evidence suggest that indicate the $A_2$ adenosine receptor is present in the striatum, this study was undertaken to delineate the role of adenosine receptors on the striatal ACh release. Slices from the rat striatum were equilibrated with $[^3H]$choline and then the release amount of the labelled product, $[^3H]$ACh, which was evoked by electrical stimulation (rectangular pulses, 3 Hz, 2 ms, 24 mA, $5\;Vcm^{-1}$, 2 min), was measured, and the influence of various agents on the evoked tritium outflow was investigated. And also, quantitative receptor autoradiography and drug-receptor binding assay were performed in order to confirm the presence and characteristics of $A_1$ and $A_2$ adenosine receptors in the rat striatum. Adenosine $(10{sim}100\;{mu}M)$ and $N^6$-cyclopentyladenosine (CPA, $1{sim}100\;{mu}M)$ decreased the $[^3H]$ACh release in a dose-dependent manner without changing the basal rate of release in the rat striatum. The reducing effects of ACh release by adenosine and CPA were abolished by 8-cyclopentyl-1,3-dipropy-Ixanthine (DPCPX, 2 ${mu}M$), a selective $A_1$, adenosine receptor antagonist, treatment. The effect of adenosine was potentiated markedly by 3,7-dimethyl-1-propargylxanthine (DMPX, 10 ${mu}M$), a specific $A_2$ adenosine receptor antagonist. 2-P-(2-carboxyethyl)phenethylamimo-5'-N- ethylcarboxamidoadenosine hydrochloride (CGS-21680C), in concentrations ranging from 0.01 to 10 ${mu}M$, a recently introduced potent $A_2$ adenosine receptor agonist, increased the $[^3H]$ACh release in a dose related fashion without changing the basal rate of release. These effects were completely abolished by DMPX $(10\;{mu}M)$. In autoradiograrhy experiments, $[^3H]$2-chloro-$N^6$-cyclopentyladenosine ($[^3H]$ CCPA) bindings were highly localized in the hippocampus and the cerebral cortex. Additionally, lower levels of binding were found in the striatum. However, $[^3H]$CGS-21680C bindings were highly localized in the striatal region with the greatest density of binding found in the caudate nucleus and putamen. Lower levels of binding were also found in the nucleus accumbens and olfactory tubercle. In drug-receptor binding assay, binding of $[^3H]$ CCPA to $A_1$ adenosine receptors of rat striatal membranes was inhibited by CPA ($K_i$ = 1.6 nM) and N-ethylcarboxamidoadenosine (NECA, $K_i$ = 12.9 nM), but not by CGS-21680C ($K_i$ = 2609.2 nM) and DMPX ($K_i$ = 19,386 nM). In contrast, $[^3H]$CGS-21680C binding to $A_2$ denosine receptors was inhibited by CGS-21680C ($K_i$ = 47.6 nM) and NECA ($K_i$ = 44.9 nM), but not by CPA ($K_i$ = 2099.2 nM) and DPCPX ($K_i$ = 19,207 nM). The results presented here suggest that both types of $A_1$ and $A_2$ adenosine heteroreceptors exist and play an important role in ACh release in the rat striatal cholinergic neurons.

• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.593-598
• /
• 2005

This work studied the loading capabilities and release behaviors of poly(ethylene-alt-maleic anhydride) (PEMAh)/poly(4-vinyl pyridine) (P4VP) multilayer films formed by the layer-by-layer(LbL) sequential self-assembly method, using Rodamine 6G(R6G) as an indicator. Thickness of the multilayer, and loading and subsequent release behavior of R6G from the multilayer were studied using UV-visible spectroscopy. The amount of R6G loaded in multilayer film increased linearly with increasing film thickness. pH-Sensitive permeability was observed, where lower pH environments increased both release rate and release amount. By additional assembling of PEMAh/poly(ethyleneimine) (PEI) capping layers on top of (PEMAh/P4VP)n multilayers, the release of R6G was better controlled.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.145-148
• /
• 2010

Nitrogen (N) is one of the most important nutrients among 17 essential nutrients for maintaining turfgrass color and quality. The slow release fertilizers were initially developed to provide a more consistent release of nitrogen over a longer period and are often used to decrease leaching potential from sandy soils. The goal of this study is to determine if various slow release N sources affect the rate at which turfgrass establishes. Six nitrogen sources were evaluated; Nitroform (38-0-0), Nutralene (40-0-0), Organiform (30-0-0), Sulfur coated urea (SCU, 37-0-0), urea (46-0- 0), and Milorganite (6-0-0). The root zone media was seeded and sodded with 'Limousine' Kentucky bluegrass (Poa pratensis L.). Sodded pots produced 182 to 518 g more clipping dry weight than seeded pots. Among seeded pots, Milorganite produced greater amount of root dry weight than any other N sources. Because the period of turfgrass growth is different between sodded and seeded plots, there were differences on clipping yield and root growth. Overall, high N rate had turf color greater than acceptable color of 6 among seeded pots throughout the study. However, low N rate didn't produce acceptable turf color throughout the study. Based on the result of this tudy, ilorganite would be ecommended for new establishment of Kentucky bluegrass an urea with less clipping yield which can lead to reduce abor.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.8
• /
• pp.554-563
• /
• 2013

The purpose of this study is to evaluate the possibility of nutrient release at up and downstream of Kangchun weir, upstream of Yuju and Ipo weir in Namhan River. For this survey, we measured basic characteristics of the sediments (water content, ignition loss, TOC, TP, SRP, TN, phosphorus fractionation) and conducted nutrients release experiments under both aerobic and anaerobic condition. The overlying water from the sediment-water column was analyzed for nutrients (i.e. TP, $PO_4$-P, TN, $NO_3$-N, $NH_3$-N) everyday for 18days. Result of soil texture experiment showed that sediments are Sand. SRP concentration before the release experiment was different with the value after the release experiment. According to this result, we can find that there were more activated release processes in anaerobic condition. $PO_4$-P increased from 1 to 8 days and remained at the maximum value (7~8 days) afterward. The rapidly increase of $PO_4$-P was observed from 1 to 2~3 days whereas the TP continuously increase from 1 to 18 days. The $PO_4$-P release rate calculated by up to 7~8 days data highly correlated with initial SRP concentration with $R^2$=0.8502. $NO_3$-N release rate appears constantly decreasing trend as -5.7~-3.08 $mg/m^2{\cdot}day$, otherwise the $NH_3$-N release rate, by-product of a organic matter decomposition using nitrate as electron acceptor, was 0.57~2.41 $mg/m^2{\cdot}day$. Substantial portion in TN can be induced by organic nitrogen which originated from the tributary passing through non-point pollutant source. Compared with other similar researches, phosphorus and nitrogen release rates obtained in this study can be considered as relatively low values. Since this study targeted the sediments accumulated by one time of flooding season, there are limitation to generalize theses results. Therefore, it is necessary to consistently monitor and investigate the accumulation of nutrients in the sediment for understanding the effect of weir construction on the overlying water quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.1
• /
• pp.8-14
• /
• 2013

The newly developed fertilizer is the slow-releasing fertilizer which can be used as a basal fertilizer without no additional fertilization at tillering stage. It has 30-4-6% of $N-P_2O_5-K_2O$ and was coated with mixture of LDPE (Low density polyethylene), EVA (Ethylene vinyl acetate), BDP (Bio degraded polymer), TALC and nonionic surfactant for the controlled release up to 50 days after application. Coating materials were designed to be decomposed naturally. This fertilizer can be applied directly to the seedling tray mechanically just before transplanting, resulting in significant labor saving effect. The developed slow-release fertilizer, which can replace both basal fertilization and top dressing at tillering stage by single application directly to seedling tray, showed the highest release at 14~21 days after transplanting. Considering the plant growth at different growth stages and yield, the optimal application rate of developed slow-release fertilizer was 300 g per rice nursery tray and the yield of rice at this application rate was 5.25 MT/ha. Rice quality in terms of head rice grain ratio, amylose content, whiteness, and taste value decreased as fertilization rate increased from 200 g to 500 g per nursery tray. Fertilization rate based on quantity of fertilizer ingredients (N, P, K) was reduced by 49.3% compared to the standard application rate and there was 49.2% reduction in labor input for fertilization.