• Journal of KIISE
• /
• v.41 no.11
• /
• pp.974-981
• /
• 2014

These days, use of multimedia streaming service and demand of QoS (Quality of Service) improvement have been increased because of development of network. QoS of streaming service is influenced by a jitter, delay, throughput, and loss rate. For guaranteeing these factors which are influencing QoS, the role of transport layer is very important. But existing TCP which is a typical transport layer protocol increases the size of congestion window slowly and decreases the size of a congestion window drastically. These TCP characteristic have a problem which cannot guarantee the QoS of UHD multimedia streaming service. In this paper, we propose a router buffer based congestion control method for improving the QoS of UHD streaming services. Our proposed scheme applies congestion window growth rate differentially according to a degree of congestion for preventing an excess of available bandwidth and maintaining a high bandwidth occupied. Also, our proposed scheme can control the size of congestion window according to a change of delay. After comparing with other congestion control protocols in the jitter, throughput, and loss rate, we found that our proposed scheme can offer a service which is suitable for the UDH streaming service.

• Journal of Korea Soil Environment Society
• /
• v.5 no.1
• /
• pp.85-96
• /
• 2000

The purpose of this study was to Investigate the effect of environmental conditions on the degradation of total petroleum hydrocarbons(TPH) in soil. The soil used for this study was sandy loam. Target contaminant, diesel oil, was spiked at 10.000mgTPH/kg dry soil. Moisture content was controlled to 50%, 70%, and 90% of field capacity of the soil. Temperature was controlled to $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, and $30^{\circ}C$. The active degradation of TPH was observed at the moisture contents of 50% and 70% of field capacity, and temperature of $10^{\circ}C$ to $30^{\circ}C$. Degradation rate of n-alkanes was about two times greater than that of TPH. Volatilization loss of TPH was about 2% of initial concentration. Biocide control and no aeration experiments indicated that removal of TPH was primarily occurred by biodegradation under aerobic condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.795-804
• /
• 2009

An HSS(Home Subscriber Server) system requires a main-memory database on main-memory unit for the real-tine management of the subscriber information in the mobile communication service, in that the system controls not only basic data for handling calls of users, but also additional service data related to user authentication and operational data. Nonetheless, HSS-DBS system, requiring the reliability and stability, need more secure data store method and a back-up technique because the system have a long startup time and the big problem on the failures of main-memory. This paper proposes an efficient back-up replication technique, on the basis of enhancing the stability and performance of HSS system. The proposed shadowing back-up technique adopting the delayed recovery process, can help minimize the real-time back-up overloads by location registration, while the proposed backup replication method enables more stable system operations with replicating the data to remote server in real time.

• Microbiology and Biotechnology Letters
• /
• v.10 no.3
• /
• pp.191-196
• /
• 1982

In order to prevent the losses of the rice by fungal deterioration during storage, fungal contaminants were isolated and identified from the grain samples (Milyang Nr.23) stored for seven months from December, 1978 to June, 1979 in silo, flat store and Tongari. Out of thirty cultures isolated from Korean paddy and brown rice samples, twenty seven species were identified, and there are eleven species of Aspergillus (A. caespitosus, A. condidus, A. chevalieri, A fischeri, A. fumigatus, A. flavus, A. nidulans, A. oryzae, A. ruber, A. sydowii, A. versicolor), five species of Penicillium (P. atramentosum, p. chrysogenum, P. cyaneofulvum, P. nototum, P. steckii), two species of each Alternaria (Al. faesiculata, Al. grisea) and Curvalaria (C, interseminata, C. tetromea), and one species of each Trichothecium roseum, Nigrospora sphaerica, Rhizopus nigricans, Fusarium spp., Mucor spp., Helminthosporium spp., and Gliocladiopsis spp. The major types of fungi grown on the surface of paddy during storage were A. flavus and A. candidus, while A. ruber and A. sydowii appeared in brown rice samples. And also A. candidus, A. versicolor and A. glacus groups were considered as major deteriorating microorganisms in stored brown and paddy rice in Korea.

• Journal of KIISE:Information Networking
• /
• v.37 no.2
• /
• pp.122-134
• /
• 2010

With the rapidly increasing demand of traffic applications, the need to support seamless and robust multimedia services in the Vehicular Ad hoc Network is growing. Fast handover for the MIPv6 (FMIPv6) developed to solve the MIPv6's problem as well as Mobile IPv6 (MIPv6) for basic mobility protocol have been developed to support seamless handover in mobile environment. However, MIPv6 and FMIPv6 are useless for Quality-of-Service (QoS) services such as multimedia applications due to the long handover latency and the packet loss problem. In this paper, we propose a seamless and robust handover scheme that supports multimedia services in Vehicular Ad hoc Network using oCoA and background DAD. Through performance evaluation, we show that the proposed scheme is more proper for Vehicular Ad hoc Network than other schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.1
• /
• pp.166-172
• /
• 2001

A RF wideband receiver for INMARSAT-B satellite communications system was composed of low noise amplifier and high gain amplifier, The low noise amplifier used to the resistive decoupling circuit for input impedance matching and self-bias circuits for low noise. The high gain amplifier consists of matched amplifier type to improve receiver gain. The active bias circuit can be used to provide temperature stability without requiring the large voltage drop or relatively high-dissipated power needed with a bias stabilization resistor. The bandpass filter was used to reduce a spurious level. As a result, the characteristics of the receiver implemented here show more than 60 dB in gain and less than 1.8:1 in input and output voltage standing wave ratio(VSWR), especially the carrier to noise ratio which is input signal level -126.7 dB m at 1537.5 MHz is a 45.23 dB /Hz at a 1.02 kHz.

• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.139-145
• /
• 1984

For the ultimate manufacture of vinegar with watermelon juice, we examined the preliminarily alcoholic fermentation of watermelon juice using Saccharomyces cerevisiae, Saccharomyces cerevisiae var. ellipsoideus and Kluyveromyces fragilis. The juice contained 3.2% total reducing sugar by the Somogyi-Nelson method. Strains of yeast culture, pH, temperature and concentration of sugar in the juice were important factors affecting alcoholic fermentation. Saccharomyces cerevisiae var. ellipsoideus produced 5.3% alcohol from the juice fortified with 12% glucose under the conditions of pH 5.73 and $27^{\circ}C$ for 8 days. Generally, small quantities of various salts and N-sources affected little the alcoholic fermentation of the juice. The sterilization of the juice by autoclaving improved efficiency of fermentation than that by $SO_2$ sterilization. Determination of alcohol was carried out by the gas chromatographic method using Chromosorb W: Carbowax as packing material.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.11
• /
• pp.1342-1349
• /
• 1988

The dependence of the etch rates of differently doped poly-Si films on the gas composition, the chamber pressure and the RF power was investigated in detail. The highest anisotropy and the lowest CD loss were achieved at the $SF_6$-rich compositions, i.e., $Cl_2:SF_6$=17:33 (SCCM), in the $POCl_3$-doped poly-Si. The etch rates increased for n-type dopant (phosphorus), while decreased for p-type (boron) with increasing the doping levels irrespective of plasma parameters. And from the results of the activation of doped poly-Si films the active carrier concentrations as well as the doping concentrations were found to be responsible for the increase of the etch rate of the phosphorus-doped poly-Si.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.9-16
• /
• 2005

The performance of satellite range measurement using tone method was analyzed in the presence of satellite link AWGN. The phase errors in range measurement are generated by AWGN of satellite up- and down-link and the degradations of satellite range measurement are dependent on the transmission mode and loop bandwidth of satellite measurement system. The analyzed effects for satellite measurement in presence of satellite link noise were also analyzed with the measured satellite range data via satellite range measurement system operating in satellite link AWGN. In RAU mode, the satellite range differences of 14.4 to 40.6 m were occurred according to the loop bandwidth of satellite range measurement system and the degradation of 0.3 dB compared with theoretical value was generated under condition of the signal-to-noise ratio of 43 dB. In RAU and TM mode, the performances of range measurement were approximately agreed to the that of RAU mode. In order to get the equal performance characteristics with RAU mode, the signal-to-noise ratio of satellite link for RAU and TM mode should be increased by signal power of 2.3 dB, which is a power loss due to transmission of telemetry signal.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.2
• /
• pp.224-234
• /
• 1997

In order to make high purity materials including low contents of interstitial impurities, 70 ㎾ electron beam melter was manufactured. The sponge Ti and Ti-6Al-4V alloy were required and melted by electron beam melter. Based on the experimental results of sponge Ti refining by electron beam melting, the purity of Ti was increased for 180 seconds but thereafter did not significantly vary. In addition, it was found that with number of melting, the purity of Ti did and vary but the yield of Ti was decreased. As a results of Ti refining, high purity Ti of 3N (99.9 wt%) could be obtained including interstitial impurities with total contents of which were maximum 900 ppm. From the experimental results of Ti-6Al-4V alloy electron beam melting, the amounts of Al loss could be estimated through thermodynamic data calculated from the regular solution model and the model of solute removal kinetics and the alloy composition calculated from the models was in accord with the experimental composition of the alloy, It took 10 minutes to make Ti-29Al-4V alloy calculated from the model into Ti-6Al-4V alloy and the composition of Ti-6Al-4V alloy was very homogeneous.