• 산업공학
• /
• 제10권3호
• /
• pp.197-208
• /
• 1997

In workplace design, an ergonomic solution should ensure low postural stress in the operator during his/her work. Stress caused by awkward working postures of the trunk, shoulders and legs can result in fatigue, discomfort, musculo-skeletal disorders and nerve entrapment syndromes. Since discomfort and musculo-skeletal disorders are both related to exposure to biomechanical load on the musculo-skeletal system, minimization of discomfort will contribute to reduction of the risk for musculo-skeletal disorders as well. Therefore, in this study, perceived discomfort on the human body joints was measured in the standing postures using the magnitude estimation in order to have a standardized numerical scale for joint discomfort. Nine healthy graduate students participated voluntarily in the laboratory study. The results revealed that perceived discomfort of all the joints increased as the joints deviated from neutral position. Especially, it showed drastic increment on perceived discomfort when deviation from neutral position in each human body joint increased from 75% to 100%. in terms of relative range of motion(R0M). On the basis of these experimental results, a preliminary ranking for assessment of stressfulness of non-neutral postures around the human body joints was suggested.

• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.59-62
• /
• 2010

At the present time, Musculo-Skeletal Disorders breaks out and it is increased in a high speed. It is a serious problem for the labors and managements. People becoming greatly interested in it. It is caused by the labor intensity which is according to the work form, hours of labor, and the labors and the labor unions have a correct understanding in it, and the labor powers becoming older, and the change of divisional social environment which is latent. Before working do the simple preparation gymnastics or operate insensitive exercise remedy without scientific verification only in the present circumstances. Although operate the Work-related Musculo-Skeletal Disorders exercise remedy, it can not get a sufficient effectiveness. So the study develop one type of exercise remedy which are divided the upper limbs exercise remedy, the trunk exercise remedy, the lower limbs exercise remedy. It can be done without using any exercise equipments and regardless places. We should also enable the exercise remedy to be easily applied to workers who are in different circumstances. To use EMG to measure the burden of exercise remedy. By doing so, employees can easily do exercises and it will help to prevent and even can treat MSD. It is just the objective of the research.

• Journal of Biosystems Engineering
• /
• 제34권4호
• /
• pp.286-294
• /
• 2009

A high prevalence of protected horticulture farmer's work-related musculo-skeletal disorders (MSDs) have been reported in precedent studies. One of the tasks required ergonomic intervention to reduce the musculo-skeletal risks is the task of product transporting. The purpose of this study is to evaluate quantitatively the spinal load of operator using manual vehicles to predict and prevent musculo-skeletal risks. Spinal load in operators using 4 kinds of manual vehicle were analyzed. Before evaluating spinal load on operator using the manual vehicles by bio-mechanical approach, it is needed to validate human model. In this study, ADAMS LifeMOD human model shows satisfactory results, comparing with already validated model's results or measured results. While Operators pushed the manual vehicles(wheelbarrow, Trolley, 2 wheel cart, and 4 wheel cart) contained loads that were 0 N and 800 N, their spinal loads(compression force, shear force) were evaluated. The compression force demonstrated under the NIOSH action limits - 3410N - for all 4 manual vehicle's operators(McGill 1997; Marras 2000). However, the lateral shear force demonstrated over the University of Waterloo - 500N - for all 3 manual vehicle's operators except 4Wheel cart (Yingline and McGill, 1999). Therefore, operators have risks in prevalence of the musculo-skeletal disorders due to shear force. The findings of this study suggest that it need to be determine the spinal load, especially lateral shear force in designing the manual vehicles in the future.

• Journal of Biosystems Engineering
• /
• 제36권1호
• /
• pp.58-67
• /
• 2011

A high prevalence of protected horiculture farmer's work-related musculo-skeletal disorders (MSDs) have been reported in precedent studies. One of the tasks required ergonomic intervention to reduce the musculo-skeletal risks is the task of harvesting. The purpose of this study is to evaluate quantitatively the spinal load of worker harvesting with squatting posture to predict and prevent musculo-skeletal risks. Spinal load in Squatting posture with asymmetric trunk motion were analyzed. Before evaluating spinal load on harvesting worker by bio-mechanical approach, it is needed to validate human model. In this study, ADAMS LifeMOD human model shows satisfactory results, comparing with already validated model's results or measured results. While worker reached arms (20%, 40%, 70% arm reach) with various asymmetric trunk motion (0, 45, 90 degree), their spinal loads (extension, twisting and lateral bending moment) were evaluated. In case of extensor moment at lumbo-sacral joint, the more the arm reach got increased, the moment increased. however, in case of twisting moment and lateral bending moment, the more both arm reach and asymmetric trunk motion got increased, the moment increased significantly. The findings of this study suggest that it need to be determine the spinal load, especially twisting, lateral bending moment in evaluating musculo-skeletal workload in squatting posture.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.168-175
• /
• 1999

The objective of this research is to review the ergonomic keyboard developed to prevent musculo-skeletal disorders from being occurred during keyboard work. It was studied by comparing it with the traditional keyboard after analyzing and comparing the typing performance and work advantages both the two keyboards. Twelve male subjects with no history of musculo-skeletal disorders participated in the experiment. The quantitative data such as typing speed, accuracy, performance time, and the number of typing errors were obtained from the HTT software that was adjusted for this experiment. RULA worksheet and the degrees of extension and ulnar deviation on right and left wrist were used to analyze the upper body postures. The experiment results showed that the typing performance of the ergonomic keyboard decreased a little, but no significant difference statistically, compared with that of the traditional keyboard. On the work posture, the ulnar deviation during typing decreased in case of the ergonomic keyboard. But, the wrist extension was increased unexpectedly. Therefore, it can be regarded as these results occur due to the shape of wrist rest and the overall height of keyboard on a table. As a result, the reconsideration and redesign on the ergonomic keyboard are requested.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3552-3560
• /
• 2012

본 연구는 한 비철금속 제조업 생산직 남성 근로자들의 인구사회학적특성, 건강관련행위 특성 및 직업관련 특성별 근골격계 자각증상호소율을 파악하고 그의 관련요인을 알아보고자 시도하였다. 조사대상은 대전광역시 소재한 비철금속 제조업체 근로자 302명을 대상으로 하였으며, 2011년 5월 1일부터 6월 30일까지의 기간 동안에 표준화된 무기명식 설문조사를 실시하였다. 연구결과, 연구대상자의 근골격계 질환 발생부위별 증상 호소율은 어깨부위의 증상이 42.7%로 가장 높았고, 다음은 허리부위 36.8%, 목 부위와 손/손목/손가락 부위가 각각 30.5%, 다리/발 부위 30.1%, 팔/팔꿈치 부위 20.9%의 순위였다. 인구사회학적 특성별 근골격계 자각증상 호소율은 연령, BMI가 낮을수록, 주관적인 건강상태가 좋지 않다는 군에서 유의하게 높았다. 건강관련 행위 특성별 자각증상 호소율은 질병으로 인한 결근한 적이 있다는 군, 외래 진료를 받은 적이 있다는 군, 입원진료를 받은적이 있다군, 규칙적인 운동이 비운동군, 수면시간이 부적당한 군에서 유의하게 높았다. 직업관련 특성별 자각증상 호소율은 업무의 신체적 부담정도가 힘들다는 군, 허리를 구부리는 작업을 하는군, 직장생활에 만족하지 않는다는 군, 근속기간이 10년 이상인 군, 허리를 구부리는 작업을 한다는 군, 반복 작업을 한다는 군에서 유의하게 높았다. 결론적으로, 생산직 남성근로자들의 근골격계 자각증상은 여러 인구사회학적 특성, 건강관련 행위특성 및 직업관련 특성과 유의한 관련성이 있었다.

• 한국도서관정보학회지
• /
• 제42권4호
• /
• pp.243-262
• /
• 2011

이 연구는 근골격계 질환의 발생에 영향을 미칠 것으로 예상되는 요인들에 대해 20개 대학도서관 300명(266명 응답)의 사서들을 대상으로 설문조사를 실시하여 그 결과를 분석하였다. 응답자의 62.5%가 근골격계 질환 자각증상을 호소하였다. 근골격계 증상의 요인들을 분석한 후, 각 부위별로 유의미한 영향을 미치는 주요 요인들을 독립변수로 하여 다중회귀분석을 한 결과는 아래와 같다. 즉, 목의 증상에 영향을 미치는 변수는 근무조건 만족도였으며, 근무 만족도가 높을수록 목 부위의 증상 정도가 낮은 것으로 나타났다. 어깨부위의 증상에 대해서는 근무만족도, 작업강도, 식사시간이 설명변수로 선택되었다. 식사시간이 불규칙적일수록, 작업강도가 높을수록, 근무만족도가 낮을수록 증상의 정도가 높은 것으로 나타났으며, 이중에서도 특히 근무 만족도의 영향이 큰 것으로 나타났다. 팔 팔꿈치에서는 숙련도가 설명변수로 선택되었으며, 업무 숙련도가 높을수록 증상 정도가 높게 나타났다. 손가락 손목을 설명해주는 설명변수로는 업무 스트레스가 선택되었으며, 업무 스트레스가 많을수록 증상 정도가 높은 것으로 나타났다. 등 허리에서는 작업강도, 직장 만족도가 설명변수로 선택되었고, 작업강도가 높을수록, 직장 만족도가 낮을수록 증상이 높은 것으로 나타났다. 마지막으로 무릎 다리의 경우 흡연여부가 선택되었으며 비흡연자일수록 증상이 낮은 것으로 나타났다.

• 대한물리치료과학회지
• /
• 제10권2호
• /
• pp.163-172
• /
• 2003

Background and Purpose. Physical therapists are at risk for work-related musculoskeletal disorders (WMSDs). Little understand the characteristics of work in physical therapist or the effort they take to prevent injury. The purpose of this study was to investigate the characteristics of work in physical therapist and the efforts for prevent injury Subjects. Standardized questionnaire was administered to 103 physical therapist in Pusan association. Methods. An questionnaire was given to each subject. Questions investigated the characteristics of work in physical therapist, efforts and caring of injury prevention. Chi-square Test used to assess the association of general characteristics with the characteristics of work in physical therapist. AVONA and T-test used to assess the association of efforts of prevent injury in independent variable Results. Physical therapist was reported a higher prevalence of WMSDs in most body areas. These attributes sometimes resulted in behaviors that contributed to the development of their WMSDs.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.136-142
• /
• 2000

One of the major requirements in preventing Work-related MusculoSkeletal Disorders(WMSDs) is to know definitely what vigorous exertion requirements are contained in a job. This requires improved job analysis tools which can accurately evaluate potentially harmful stresses to the musculoskeletal system. But to simply evaluate the level of stress at a joint, or in a muscle is not enough to motivate job changes. Therefore, the development of ergonomic evaluation tools for the jobs are important to ergonomics. The main objective is compared of the results that made by the ergonomic evaluation tools (e.g., BRIEF and RULA) in actually shoes manufacturing. These were developed in the foreign. So, it is priory needed to research of the ergonomics about Korean characteristic work by physiology and biomechanics.

• 대한추나의학회지
• /
• 제4권1호
• /
• pp.99-109
• /
• 2003

Dr. Lawrence H Jones developed innovative approach for the treatment of neuromuscular and musculo-skeletal disorders such as fibromyalgia, myofacial pain syndrome, any other muscle pain. This technique is called Strain/Counterstrain technique which uses effect of neuromuscular reflex for treatment of strain. First, Relieving spinal or other joint pain by passively putting the joint into its position of greatest comfort; secondly relieving pain by reduction and arrest of the continuing inappropriate proprioceptor activity. This was accomplished by markedly shortening the muscle that contains the malfunctioning muscle spindle by applying. mild strain to its antagonists. In other words, the inappropriate strain reflex is inhibited by application of counterstrain. Many other techniques have been developed for treating of muscle pain due to somatic dysfunction, but we want to introduce you to strain/counterstrain technique because this is basic concept and theory of Chum therapy for controling motor system.