• 대한통합의학회지
• /
• 제9권1호
• /
• pp.133-140
• /
• 2021

Purpose: This study aimed to compare the relative muscle activity on the erector spinae, gluteus maximus, and hamstring, using a non-visual feedback bridge exercise and a visual feedback bridge exercise with a tension sensor and clinometer. Methods: Twenty-two healthy subjects participated in this study. The study subjects performed bridge exercises without visual feedback, bridge exercises using a tension sensor, and bridge exercises using an inclinometer in the supine position, and the muscle activity of the left and right erector spinae, gluteus maximus, and hamstring muscles was measured while maintaining isometric contraction during the bridge movement. Muscle activity was measured by using surface an electromyography equipment. To standardize the measured action potential of each muscle, the maximum voluntary isometric contraction was measured. The bridge exercise was repeated 3 times for 5s each. Using repeated analysis of variance, we compared the significant difference in EMG activity for each muscle between the three experiments, and all statistical processing was performed using SPSS version 26. The statistical significance level was set at α = 0.05. Results: During bridging exercises, the asymmetry of the muscle activity of the erector spinae and gluteus maximus during visual feedback guiding was lower than that during no visual feedback. However, there was no significant difference. Moreover, the asymmetry of the muscle activity of the hamstring muscles was significantly lower during tension sensor visual feedback than that during no visual feedback (p<0.05). Conclusion: These findings suggest that bridge exercise with visual feedback using a tension sensor and an inclinometer is effective in inducing symmetrical movement. When it is necessary to symmetrically adjust the weight load of both feet during the bridge exercise, it is effective to apply visual feedback using a tension sensor.

• 대한의용생체공학회:의공학회지
• /
• 제43권3호
• /
• pp.177-184
• /
• 2022

The purpose of this study was to present the IMU sensor based trunk stabilization exercise and to evaluate the changes in the muscle activity and thickness with non-specific low back pain patients (N=30). They were classified into two groups; lumbar stabilization exercise using IMU sensor (ILS), (n₁=20) and general lumbar stabilization exercise (GLS), (n₂=10). By comparing the difference between pre and post intervention via trunk muscle activity and muscle thickness, the significant differences were identified. Muscle activity was measured on external oblique (EO), internal oblique (IO), and multifidus (MF) by using surface electromyography (sEMG). Muslce thickness was measured on external oblique, internal oblique, transverse abdominis (TrA), and multifidus (MF) by using ultrasonography. sEMG activity was recorded at right side-bridge position. Each group performed the proposed lumbar stabilization exercise for 30 minutes a day, 5 times a week for 4 weeks. Trunk muscle activity was observed with a significant increase in the IO of ILS (p<.05) and a decrease in the MF of GLS (p<.05). Trunk muscle thickness was significantly increased in left EO and both IO of GLS (p<.05), and also significant increased right EO, both IO, both TrA, and both MF of the ILS (p<.05). In the future, a convergence approach of rehabilitation and engineering is needed to select a sensor suitable for rehabilitation purposes, study the validity and reliability of data, and produce appropriate rehabilitation contents.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1169-1172
• /
• 2005

For elderly people, an advanced training machine that uses actuator and can adjust load according to muscle activity is proposed. The proposed machine allows users to have a safe and effective training through exercise close to ordinal motion appears in daily life such as stretching or stooping motion. A muscle activity sensor real-timely monitors the activation level of user's muscle during the exercise and the training load is adjusted based on the measured data. The training load is exerted and continuously controlled by electric/pneumatic actuator.

• 한국전자통신학회논문지
• /
• 제10권3호
• /
• pp.425-431
• /
• 2015

본 연구는 태극권이 노인의 균형과 센서 USN을 이용하여 발목관절 근활성도에 미치는 영향을 알아보기 위해 다음과 같이 실시하였다. 대상자는 65세 이상 노인 36명을 태극권을 시행한 실험군과 태극권을 하지 않은 대조군을 각각 18명씩 무작위 배정하였다. 실험군은 태극권을 주 3회 6주 동안 18회 실시하였다. 모든 대상자는 실험 전과 실험 후에 정적 및 동적균형검사와 센서 USN을 이용하여 발목관절 근활성도 변화를 측정하였다. 정적균형은 기능적 뻗기 검사, 동적균형은 외발서기검사 그리고 발목관절 근활성도 측정은 눈을 감고 발을 모아 서있는 자세에서 안뜰계에 평류안뜰 자극을 적용한 상태에서 측정하였다. 연구결과, 정적 및 동적균형 모두 두 집단 간 통계적인 차이를 나타냈고, 발목관절 근활성도 분석도 통계적으로 유의한 차이가 나타났다. 따라서 태극권이 노인에게 균형과 발목관절 근활성화에 효과적임을 알 수 있었다.

• 융합정보논문지
• /
• 제7권5호
• /
• pp.47-51
• /
• 2017

본 연구는 스마트폰 사용으로 인해 발생하는 전방머리자세의 유발 스트레스를 줄이기 위한 웨어러블 센서 착용이 전방머리자세 유발을 일으키는 목세움근과 위등세모근의 근피로에 미치는 영향을 알아보고자 하였다. 본 연구는 20~30대 건강한 성인을 대상으로 하여 일반적으로 스마트폰을 사용하는 대조군, 전방머리자세에 대한 자세를 의식하며 사용하는 비착용군 그리고 웨어러블 센서를 착용하는 실험군으로 나누어 근활성도를 살펴보았다. 목세움근과 윗등세모근의 근활성도는 대조군, 비착용군, 실험군과 비교하여 차이가 없는 것으로 나타났다. 또한 목세움근의 근활성도의 변화는 모든 군에서 증가하였고, 윗등세모근의 경우 비착용군과 대조군에 비해 착용군의 근활성도가 증가하였으나 통계적 유의성은 없었다. 즉 웨어러블 센서의 착용은 의식적인 자세 조절에 있어서 효과적일 수 있지만 다른 부위의 근긴장을 유발 할 수도 있다.

• The Journal of Korean Physical Therapy
• /
• 제32권1호
• /
• pp.52-57
• /
• 2020

Purpose: This study compared the muscle activities of the Vastus medialis oblique (VMO) and the Vastus lateralis (VL) at three different knee extension angles: 90°, 135°, and 180° in the sitting position. Methods: Twenty subjects between 20 and 30 years of age participated in the study. A mobile phone application called the Clinometer was used to measure the knee joint angle. Electromyography (EMG) was performed to measure the muscle activities of the VMO and VL muscles during knee isometric extension exercises. The pulling sensor was used to maintain 70% of the maximum strength of the knee extensor continuously in the sitting position. After attaching the EMG sensor, the subjects were asked to perform isometric knee extension exercises randomly among three knee extension angles (90°, 135°, or 180°) in the sitting position. One-way repeated measures analysis of the variance and a Bonferroni post hoc test was used to identify the VMO and VL muscle activity during knee extension angles among 90°, 135°, and 180°. Results: The VMO and VL muscle activities increased with increasing knee extension angle in the sitting position (p<0.01). Conclusions: Knee extension exercise at a 180° angle in the sitting position can be recommended to increase the muscle activity of the VMO and VL muscle activities efficiently.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1231-1235
• /
• 2016

In this study, it measures electromyogram to estimate scoliosis by using sensors in both sides of spinal erector muscle. A device is measured raw data to input mcu through a filter and amplifier. MCU is named "arduino" that is calculated muscle activity with algorithm by inputting data. By comparing with both sides of spinal erector muscle's activity, it studies about estimation of scoliosis

• PNF and Movement
• /
• 제20권2호
• /
• pp.215-222
• /
• 2022

Purpose: The purpose of this study was to compare the effects of passive scapular upward rotation and posterior tilt and active scapular posterior tilt on the muscle activity of the upper trapezius (UT), lower trapezius (LT), and serratus anterior (SA). Methods: Fifteen healthy subjects performed general arm elevation, arm elevation with passive scapular upward rotation and posterior tilt, and arm elevation with active scapular posterior tilt. For active scapular posterior tilt, the subjects were trained in this movement using visual biofeedback and a motion sensor. During each arm elevation condition, electromyography was used to measure the muscle activity of the UT, LT, and SA. The measured data were analyzed using a one-way repeated ANOVA. Results: LT muscle activity was significantly increased during arm elevation with active scapular posterior tilt compared to both general arm elevation and arm elevation with passive scapular upward rotation and posterior tilt (p < 0.05). SA muscle activity was greater during arm elevation with passive scapular upward rotation and posterior tilt than during general arm elevation (p < 0.05). There was no significant change in UT muscle activity among the tested arm elevation conditions (p > 0.05). Conclusion: Performing arm elevation with active scapular posterior tilt and performing arm elevation with passive scapular upward rotation and posterior tilt may be useful strategies for increasing muscle activation of the LT and SA, respectively.

• 국제물리치료학회지
• /
• 제10권4호
• /
• pp.1868-1872
• /
• 2019

Background: Lower trapezius muscle function is important for the prevention and treatment of shoulder injuries. However, scapular posterior tilt movement has been overlooked in lower trapezius strengthening exercise programs. Objective: To examine the effects of prone arm lifting with scapular posterior tilt (PALSPT) on trapezius muscles. Design: Crossover study Methods: 17 healthy males were recruited for participation in this study. Participants performed backward rocking diagonal arm lifting (BRDAL) and PALSPT. To train participants in scapular posterior tilt movements for PALSPT, visual biofeedback of scapular movements was provided using a motion sensor. Electromyography (EMG) activities of the middle and lower trapezius were recorded using a surface EMG system. Differences in middle and lower trapezius muscle activity between BRDAL and PALSPT exercises were analyzed. Results: Lower trapezius muscle activity was significantly greater during PALSPT than during BRDAL (p=.006). Although greater EMG activity was observed in the middle trapezius during PALSPT than during BRDAL, this difference was not significant (p=.055). Conclusions: The results of the present study indicate that scapular posterior tilt movements must be considered in lower trapezius muscle strengthening programs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.77.5-77
• /
• 2002

A mechanical device was developed for assisting the grasping function of a person whose fingers suffered cervical injury and thus are unable to grasp. This device is composed of a mechanical glove put on the user's hand and a muscle sensor to measure the activity of his or her muscle. The mechanical glove consists of a finger frame, a base and an air cylinder mounted on the base. With the kinematics carefully designed, the finger frame can achieve the grasping motion under the actuation of the air cylinder. For controlling this motion, an innovative sensor was developed to detect the user's motion intention. The sensor measures the change of the muscle stiffness...