• Journal of environmental and Sanitary engineering
• /
• v.15 no.2
• /
• pp.49-57
• /
• 2000

The objective of this study is to find solid waste decomposition in landfill without leachate discharge. This study was observed variation of landfill gas production rate and leachate for stabilization assessment, and using four sets of lysimeter as experimental apparatus. Soild waste decomposition was accelerated in without leachate discharge system by sufficient moisture for methane bacteria. And gas production rate was between 54.2ℓ/kg VS∼335.9ℓ/kg VS in each lysimeter. Generation time of methane gas was showed different in each lysimeter, but it was much faster than literature research. The time of stabilization phase were began as follows : L-1 400 day, L-2 350 day, L-3 170 day and L-4 70 day respectively. Decreasing times of BOD/COD ratio and C/N ratio were necessary more than literature research because organic matter was not discharge such as wash out.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.97-102
• /
• 2000

This paper presents the design, construction and performance of ground treatment to support road embankment on refuse landfill. Long-term settlement of refuse landfill is analysised by Sower and Yen/scanlon. As a results of site test, predicting settlement excess the allowable settlement and ultimate bearing capacity is not satisfied. The effectiveness of DDR(Deep Dynamic Replacement) is monitered by field tests (SPT, PBT, PMT) before, during and after construction of the stone columns. The ultimate bearing capacity for reinforced landfill by stone columns obtained from the in-situ test results has been compared with the existing theories. In municipal wastes landfill, settlement after treatment using stone column is satisfied to allowable residual settlement. Therefore, long-term stability can be gain in these cases.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1199-1204
• /
• 2000

This study concerns the cement-solidification/stabilization of the municipal waste incineration fly-ash. Compressive strength and leaching test of heavy metals were evaluated for varying types and ratios of cements and the effects of some additives of Hauyne clinker and slag were also discussed. In the cases of using cement binders more than 10%, the compressive strength after 3 days showed the values over $20kgf/cm^2$. Type III cement and Hauyne clinker improved the compressive strength, especially early strength. And the values of leaching test showed that cement-solidification is effective method to stabilize heavy metals especialy when using type III cement and adding Hauyne clinker and slag,.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.9 no.1
• /
• pp.25-32
• /
• 2003

Packaging has been regarded as a environmental problem because of its relatively high portion of municipal solid wastes. Especially, cosmetic packaging has been focused because of characteristics of cosmetic packaging. Cosmetic products are highly sensitive products that pursue the beauty differently from other products. Cosmetic packaging materials are difficult to be recycled. Purpose of this study is to suggest the method to improve the environmental friendly packaging of cosmetic products. This study contains the major governmental policies on the cosmetic packaging in terms of environment issues in Korea, and suggested methods to develop the environmental friendly packaging of cosmetic products.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.149-156
• /
• 2011

In case of domestic pyrolysis dry distillation gassification technology, it stays at the stage of its early introduction and development. Moreover, the companies possessed of this technology are limited to Japan and some countries in Europe, and domestic operative performance of this system is nominal, so there exist a lot of difficulties in securing its basic data. In addition, considering its operation and management, there happens a corrosion of metals by the production of corrosive gases in time of combustion of waste, and there arise a problem of occurrence of low temperature corrosion on exterior casing or gas ducts of a combustion chamber due to the high temperature corrosion around the burner of an incinerator, lowering the durability of an incinerator. Therefore, this study looked at the problems arising in time of incineration by understanding the characteristics of the pyrolysis dry distillation gassification incinerating facility, and did research on the improvement plan for durability of an incinerator for more economic, efficient waste incineration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4679-4688
• /
• 2011

This study was performed to the municipal waste generation amounts and characteristics for B city in Gangwon province, predicted the methane gas generation rate emitted from landfill, and analyzed the possibility of energy recovery to RDF(Refuse Derived Fuel) using combustible waste. The study results showed that the average bulk density of municipal waste for B city was 144.0 kg/$m^3$, and the average ratios of combustible waste were 36.0 % of paper, 21.6 % of vinyl, and 19.7 % of food waste. respectively. In the experiment for heating value, high and low heating value(moisture) was measured to 3,471 $kca{\ell}$/kg and 2,941 $kca{\ell}$/kg, respectively. After the prohibition of burying of food waste in landfill, the heating value of municipal waste was dramatically increased due to increase of the ratio of paper, vinyl, and plastic waste. The prediction results of methane gas generation rate emitted from landfill showed that the gas generation rate is increasing to 2,505.7 CH4 ton/year in 2021. After then, the rate is decreasing gradually. When the RDF facility is installed, the rate is decreasing after peaking at 1,956.9 CH4 ton/year in 2013. The generation rate of LFG emitted from waste landfill of B city was analyzed to 9.92 $m^3$/min, similar to 10.11 $m^3$/min for other city.

• Journal of the Korean Dietetic Association
• /
• v.14 no.1
• /
• pp.51-63
• /
• 2008

The purpose of this study was to understand the management status of food wastes in school meal to find the effective ways that would reduce and recycle them. Data was collected using questionnaires from 223 school dietitians located in Jeonbuk area. The results were as followed : 1) Waste was managed by the dietitians(54.7%) and cook(42.2%). The waste disposal contract was made by dietitians(65.0%), executives(31.4%). Therefore, school dietitians had primary responsibilities in the waste management. 2) As disposal ways, 48.9% processed municipal solid waste and food waste together and 46.6% processed separately. 3) A half of schools(52.9%) produced food wastes weighed under 10$\sim$15kg daily and using food wastes as animal food for farms was most popular method to dispose(87.4%). 4) Reasons to have food-wastes were disliking the taste of menu(50.2%) and the inappropriate ways of dealing with remaining food(64.1%) and donating to food bank(33.6%) in order. 5) The suggested ways to reduce the food-waste was to improve on cooking method(72.2%), changing of portion size(61.0%), measuring the amount of leftover food(53.4%) and requesting cooperation to educators(52.9%). 6) The reported consequences of reducing the food waste were: lowered grocery expenses(46.2%), and inspiring students on helping environmental preservation(23.8%). Therefore, the administration should work on finding a method to reduce food-waste and a way to use these resources efficiently. It is important to induct student's attitude on recycling remaining products by using food bank via nutrition education. Dietitian also should consider to reduce the leftover of food by using a standardized recipe.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.109-112
• /
• 2009

Various environmental problems due to the rapid industralization and urbanization have been worsened as much as to threaten the environmental restitution of globe and become a critical international issue. Korean government presented the green growth as a new state vision for 60 years afterwards and is making efforts to solve the environmental problems. Daegu metropolitan city has faced various environmental problems including overpopulation of cities, traffic pollution, household wastes and green zone problem because of urbanization for the last decades. As such urbanism continues, the quality of residential environment is rapidly deteriorating and the intensive use of land leads to increase of building area raising the temperature of cities. Therefore there have been demands for the healthy, pleasant and satisfying residential environment and the improvement of residential environment and such recognition rises from society in full measure. Nevertheless the current residential complex concentrates only on raising the efficiency of land use. Related laws in the past(Daegu Metropolitan City, Urban Planning Municipal Ordinance as of October 10, 2003) tried to prepare a standard to segmentalize the building-to-land ratio, floor area ratio and regulations of number of floors vertically, but currently it is abolished and the regulations are becoming eased. The purpose of this study was to analyze the characteristics of the floating wind before and after the vertical segmentation of residential areas(Daegu Metropolitan City, Urban Planning Municipal Ordinance as of October 10, 2003) by using KLAM_21, a model that enables analysing and predicting the flow and generation of clod wind, and to present a plan to improve the quality of residential areas afterwards when developing building lot and re-developing housing areas.

• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.453-460
• /
• 2009

In order to provide fundamental data for developing high-grade(high-quality and low-pollution) Refuse Derived Fuel(RDF), we analyzed caloric value and HCl content by Municipal Solid Waste(MSW) type. The caloric value was analyzed using calorimeter and HCl content was analyzed using mercury(II) thiocyanate method. In case of paper type the caloric value was 3,060~3,608kcal/kg and the HCl content was 239~6,135ppm. In case of vinyl-plastics the caloric value was 5,946~9,888kcal/kg and the HCl content was 429~455,771ppm. According to the result of quality assessment by MSW type, the calroric value of vinyl-plastics type was showed higher than that of paper type and in case of HCl content the paper type was showed lower than vinyl-plastics type. So, We mixed paper and plastic wastes. The caloric value of mixed MSW(paper and plastics) was 5,046~9,125kcal/kg and the HCl content was 239~6,135ppm. Also, The caloric value of packaging waste(film-plastics) was 5,982~8,045kcal/kg. Therefore It is possible to develop high-grade Refuse Derived Fuel through suitable mixing of paper and plastic in municipal solid waste.

• Environmental Engineering Research
• /
• v.21 no.1
• /
• pp.15-21
• /
• 2016

Magnesium potassium phosphate cement (MKPC) is an effective agent for solidification/stabilization (S/S) technology. To further explore the mechanism of the S/S by MKPC, two kinds of Cd including $Cd(NO_3)_2$ solution (L-Cd) and municipal solid waste incineration fly ash (MSWI FA) adsorbed Cd (S-Cd), were used to compare the effects of the form of heavy metal on S/S. The results showed that all the MKPC pastes had a high unconfined compressive strength (UCS) above 11 MPa. For L-Cd pastes, Cd leaching concentration increased with the increase of Cd content, and decreased with the increase of curing time. With the percentage of MSWI FA below 20%, S-Cd pastes exhibited similar Cd leaching concentrations as those of L-Cd pastes, while when the content of MSWI FA come up to 30%, the Cd leaching concentration increased significantly. To meet the standard GB5085.3-2007, the highest addition of S-Cd was 30% MSWI FA (6% Cd contained), with the Cd leaching concentration of 0.817 mg/L. The S/S of L-Cd is mainly due to chemical fixation, and the hydration compound of Cd was $NaCdPO_4$, while the S/S of S-Cd is due to physical encapsulation, which is dependent on the pore/crack size and porosity of the MKPC pastes.