• Journal of environmental and Sanitary engineering
• /
• v.10 no.3
• /
• pp.29-34
• /
• 1995

This study was on the characteristics and heating values analysis of municipal solid wastes according to the volume- rate garbage collection system in Busan. Each waste sample was analyzed to obtain physical composition, proximate analysis, heating value, chemical composition. And the heating value were compared with those of the past waste collection system. The average physical composition of A.P.T. area was food waste 54.0~65.7% , while that of common residence was food waste 57.9~61.2% . The density of solid waste were largely different for site and the highest densities of waste was $399.6kg/m^{3}$ from Market. The low heating value of waste from residence site was 996.9kca1/kg~1, 238.1 kcal/kg which was lower than 1, 000kcal/kg~1, 800kca1/kg of the past wastes. These difference was mainly due to the difference of moisture content and the amount of vegetables.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.103-108
• /
• 2002

This research was performed to investigate the generation and physico-chemical characteristics of municipal solid wastes. The results were as follows: i) The generation rate and bulk density were 0.157 kg/cap/d and 147.8 g/L in residential zone, respectively. In non-residential zone, the generation and bulk density were 1.71 kg/cap/d and 85.6 g/L, respectively. Consequently, bulk density of non-residential zone was lower than that of residential zone. ii) The wastes consisted of 90% of combustibles and 10% of incombustibles in residential zone. And the wastes from non-residential zone was composed 85% of combustibles and 15% of incombustibles. iii) Water content was estimated at 47~50% in residential zone and restaurants. In non-residential zone, except restaurants, water content was in the range of 10~30%. Ash content was nearly 10% in overall zone.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.1
• /
• pp.3-18
• /
• 1994

Municipal solid wastes in Korea have physical and chemical properties suitable for composting, but composting has had little practical use in solid waste disposal until now because of a lack of understanding of process control. For practical use of composting, process control must be capable of maintaining good product quality while large quantities are composted in a short period of time. Ventilation control to maintain optimum temperature(Temperature Feedback Aeration Method) is reported to be convenient to operate. The purpose of this study is to analyze process efficiency and optimum temperature in the temperature feedback aeration method for composting of municipal solid wastes. The results of this study show that degradation and drying of substrate in the temperature feedback aeration method are higher than those in the constant aeration method. And the optimum temperature range for composting of solid wastes appears to be $50{\sim}54^{\circ}C$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.76-85
• /
• 2004

Anaerobic decomposition of municipal solid waste (MSW) had potential adverse impacts such as the production of methane and long-term post closure on human health and the environment. It was demonstrated that aerobic degradation of MSW resulted in the reduction of a methane yield and the enhancement of stabilization of MSW. Excavated solid wastes were both aerobically and anaerobically treated in order to evaluate the effects of air injection on the stabilization of landfill site. The municipal solid waste (MSW) samples were excavated from a 10-year old landfill (operation period: 1991. 11~1994. 11), Jeonju, Korea. Excavated municipal solid wastes are primarily composed of soils and vinyl/plastics. For the two aerobic simulated lysimeters, the levels of $O_2$ ranged 1.6~23.1% and the levels of $CO_2$ ranged 1.5~15.1%, which confirmed the aerobic decomposition. Aeration did prevent methane formation. For the anaerobic simulated lysimeter, the $CO_2$ rose as $O_2$ was consumed and low levels of CH4 were produced. The pH levels ranged from 7.7 to 8.9 for anaerobic lysimeter and from 7.3 to 8.5 for aerobic lysimeters. As expected, aerobic treatment proved to enhance the removal of biodegradable materials in the excavated solid wastes when monitoring the concentration of BOD, COD, $NH_4-N$, and $NO_3-N$ in the leachate.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.93-101
• /
• 1998

This study was carried out to investigate and analyze the citizen's attitude for the issue of the municipal solid wastes in Miryang city. The waste generation rate was decreased by 56% compared with 1991, and 71.8% of generated wastes were treated by landfill method. 61.6% among respondents were contacted waste problem by TV and the majority of respondents felt seriousness of food-waste problem. The majority of people felt that waste discharge decreased after "volume-base charge system" and 71% of total respondents were burdened down with use of volume-base charge envelope. The greater part of citizens answered that they experienced damage due to wastes and satisfied with the collection system but they recognized the necessity of the establishment of collection system and increase of cleaners must be nessary.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.63-68
• /
• 1992

This study was performed to investigate the seasonal variation of the composition of domestic solid wastes and the characteristics of the leachate sampled in In-Cheon sanitary landfill site. The results were as follows 1. Combustible part was larger than incombustible part of the domestic solid wastes in spring and sumer. 2. The food waste was major source of solid wastes in In-Cheon city as 36.5%, and its variation by seasons was negligible. 3. BOD of the leachate was in the range of 853~7, 350mg/l, and fluctuated by seasons. 4. The mean of COD$_{cr}$ Was 5, 044mg/l, the mean of COD$_{Mn}$ was 2, 212mg/l. Namely, the method by $K_{2}Cr_{2}O_{7}$ was more sensitive than the method by KMnO$_{4}$. 5. TOC was in the range of 773~3, 958mg/l, it was lower than BOD.

• Journal of Environmental Science International
• /
• v.12 no.4
• /
• pp.461-467
• /
• 2003

This study was conducted to provide the basic information to know reasonable method f3r the removal and treatment of municipal solid wastes(MSWs). MSWs four different sources(apartment residence, commerce, office/industry) in Daegu city were collected, and bulk density, physical composition, moisture, combustible, ash, elements and heating values were investigated. The values of bulk density were at range of 0.30∼0.41ton/m$^3$. The percentages of foods, papers, vinyls/plastics, textiles, rubbers/leathers, metals and glasses/ceramics of wet muncipal solid wastes from three sources except office/industry were at range of 27.3∼46.4%, 21.2∼38.4%, 10.3∼11.9%, 3.8∼5.2%, 0.5∼1.7%, 6.9∼8.7% and 1.9∼2.6% respectively. The percentages of papers, foods, vinyls/plastics, textiles, rubbers/leathers, metals and glasses/ceramics of dry muncipal solid wastes from three sources except office/industry were at range of 21.1∼40.4%, 14.2∼30.1%, 15.2∼17.8%, 4.0∼6.0%, 0.9∼2.8%, 12.2∼14.1% and 3.1∼3.7％ respectively. The moisture contents of foods, woods, textiles and papers in wastes were at range of 65.7∼76.2%, 34.6∼50.0%, 22.2∼44.8 and 30.6∼44.4% respectively. The carbon contents of vinyls/plastics, rubbers/leathers, textiles, woods, papers and foods in wastes were at range of 75.88∼79.87%, 58.24∼70.74%, 45.23∼51.63%, 42.29∼45.58%, 40.19∼48.4% and 25.86∼36.25% respectively. The low heating values of foods, papers, woods, textiles, rubbers/leathers and vinyls/plastics by Dulong's law were at range of 178∼1,353kcal/kg, 770∼1,660kcal/kg, 995∼1,629kcal/kg, 2,133∼2,432kca1/kg, 4,200∼7,275 kcal/kg and 6,384∼8,722kcal/kg respectively, and the high heating values of them were at range of 782∼2,056 kcal/kg, 2,459∼3,314kca1/kg, 3,056∼3,592kcal/kg, 4,381∼5,087kca1/kg, 5,005∼8,066kca1/kg and 10,032∼10,739 kcal/kg respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.101-111
• /
• 2009

In this study, the physico-chemical characteristics of municipal solid waste (MWS) which was treated in gangwon area were investigated. It is necessary to measure the characteristics of municipal solid waste for build a waste treatment and RDF facility and for data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $101.8{\sim}199.8kg/m^3$. This MSW was composed of 30.7% of food wastes, 36.3% of papers, 15.8% of plastics & vinyls, 1.9% of textiles, 3.2% of wood and 1.5% of rubber & leathers respectively. Most of MSW are composed of food, paper and plastic waste and the combustible waste is more than 90%. For three components, moisture is 44.6%, combustible component is 47.7% and ash is 7.7% respectively. The chemical elements are carbon, oxygen, and hydrogen on the dry basis of wastes. The low heating value of the MSW measured by calorimeter was obtained as 2,631 kcal/kg, and the high heating value of the MSW was obtained as 3,310 kcal/kg.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.58-62
• /
• 1992

The objective of this study is to investigate the generation rates, composition, propertion and lower heating values of each material in the municipal solid wastes(MSW) as well as the effect of landfill leachate on the environment in Taejon. The results are as follows: 1. The annual average generation rate of MSW in Taejon is approximately 1.7kg/c.d. 2. The weight percent of combustible matters is on average 80 and the lower heating value of MSW is measured to be more than 1,700 kcal/kg after removing the briquette component. 3. It is necessary for us to take a proper management system for leachate treatment in the landfill because it has many problems in the sewage and groundwater. 4. It is recommeded that MSW be treated by multiple methods such as the sanitary landfill, resources and recovery, composting and incineration.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2006.04a
• /
• pp.197-200
• /
• 2006