• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.129-141
• /
• 2024

This study derived production-production multipliers using a regional input-output table and estimated the induced effect of aggregates through the non-metallic minerals sector and the concrete products sector. In deriving the induced effect of aggregates, it is difficult to use the regional input-output table due to the sector classification problem. This study analyzed the non-metallic mineral sector, including aggregates, as aggregates sector, and the concrete products sector, which uses most of the aggregate production. By analyzing this, we attempted to alleviate difficulties caused by sector classification restrictions. In the process of estimating the induced effect, it was assumed that there was a decrease in aggregate production, and in the process of analyzing the concrete products sector, the effect of the decrease in concrete product production due to the decrease in aggregate production, that is, the decrease in production of one unit of aggregate was 0.8511 in the concrete product sector. The analysis was conducted on the premise of a decrease in unit production. Inducing effects within and between regions were calculated for the 17 metropolitan cities and provinces classified by the regional input-output table. The employment effect was also calculated, assuming a 10% production decrease to show differences according to the size of the aggregate and concrete product sectors in each region.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.188-197
• /
• 2010

This paper presents experimental results of a series of 1-g shaking table model tests performed on end-bearing single piles and pile groups to investigate the effect of particle size on the dynamic behavior of soil-pile systems. Two soil-pile models consisting of a single-pile and a $4{\times}2$-pile group were tested twice; first using Jumoonjin sand, and second using Australian Fine sand, which has a smaller particle size. In the case of single-pile models, the lateral displacement was almost within 1% of pile diameter which corresponds to the elastic range of the pile. The back-calculated p-y curves show that the subgrade reaction of the Jumoonjin-sand-model ground was larger than that of the Australian Fine-sand-model ground at the same displacement. This phenomenon means that the stress-strain behavior of Jumoonjin sand was initially stiffer than that of Australian Fine sand. This difference was also confirmed by resonant column tests and compression triaxial tests. And the single pile p-y backbone curves of the Australian fine sand were constructed and compared with those of the Jumoonjin sand. As a result, the stiffness of the p-y backbone curves of Jumunjin sand was larger than those of Australian fine sand. Therefore, using the same p-y curves regardless of particle size can lead to inaccurate results when evaluating dynamic behavior of soil-pile system. In the case of the group-pile models, the lateral displacement was much larger than the elastic range of pile movement at the same test conditions in the single-pile models. The back-calculated p-y curves in the case of group pile models were very similar in both sands because the stiffness difference between the Jumoonjin-sand-model ground and the Australian Fine-sand-model ground was not significantly large at a large strain level, where both sands showed non-linear behavior. According to a series of single pile and group pile test results, the evaluation group pile effect using the p-multiplier can lead to inaccurate results on dynamic behavior of soil-pile system.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.53-58
• /
• 2001

This paper presents a high resolution capacitive microaccelerometer for applications to personal information systems. We reduce the mechanical noise level of the microaccelerometer by increasing the proof-mass based on deep RIE process. We reduce the electrical noise level by increasing the amplitude of an AC sense voltage. The high sense voltage is obtained by DC-to-DC voltage multiplier. In order to solve the nonlinearity problem caused by the high sense voltage, we modify the conventional comb electrode of straight finger type into that of branched finger type, resulting in self force-balancing effects for enhanced detection linearity. The proposed branched finger capacitive microaccelerometer was fabricated by the deep RIE process of an SOI wafer. The fabricated microaccelerometer reduces the electrical noise at the level of $2.4{\mu}g/\sqrt{Hz}$ for the sense voltage of l6.5V, which is 10.1 times smaller than the electrical noise level of $24.3{\mu}g/\sqrt{Hz}$ at 0.9V. For the sense voltage higher than 2V, the electrical noise level of the microaccelerometer became smaller than the constant mechanical noise level of $11{\mu}g/\sqrt{Hz}$. Total noise level, including the electrical noise and the mechanical noise, has been measured as $9{\mu}g/\sqrt{Hz}$ for the sense voltage of 16.5V, which is 3.2 times smaller than the total noise of $28.6{\mu}g/\sqrt{Hz}$ for the sense voltage of 0.9V. The self force-balancing effect results in the increased stiffness of 1.98 N/m at the sense voltage of 17.8V, compared to the stiffness of 1.35 N/m at 0V, thereby generating the additional stiffness at the rate of $0.002N/m/V^{2}$.

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.11-17
• /
• 2012

The past combats depended often on a number of firepower and manpower. However, integrated decision support viewpoint from communications, surveillance, reconnaissance, intelligence and so forth in combats witnessed in the Gulf, the Middle East, and Afghanistan have changed the trends of combat. That is, the force multipliers which many support systems enhance the combat potential of the fighting forces significantly become big issues to win or not in that combat. According to changing recent combat trend, Lanchester's combat model is being challenged to develop keeping pace with the new trend. We approach this paper as mathematical modeling about how the effect of terrain affects in the combat. Terrain information is invisible, but it is necessary to consider for analysis of warfare. Additionally, tangible or intangible elements affecting to attrition coefficients are continuely reflected to the combat model from decision-makers, then it will be a model closer to the reality and very suggestive to the actual world.

• Environmental Engineering Research
• /
• v.17 no.1
• /
• pp.35-39
• /
• 2012

In this study, multiparametric flow cytometry (FCM) was installed to enumerate the diagnosis of Pseudomonas aeruginosa ATCC 10145 and Escherichia coli K12 (IFO 3301). The nucleic acids (DNA/RNA) were double stained by a LIVE/DEAD bacLight viability kit, involving green SYTO 9 and red propidium iodide (PI), based on the permeability of two chemicals according to the integrity of plasma membrane. As the results showed, the gate for dead bacteria was defined as the range of $0.2{\times}10^0$ to $6.0{\times}10^1$ photo multiplier tube (PMT) 2 fluorescence (X-axis) and $2.0{\times}10^0$ to $2.0{\times}10^2$ PMT 4 fluorescence (Y-axis), and the gate for live bacteria was defined as the range of $6.0{\times}10^0$ to $6.0{\times}10^2$ PMT 2 fluorescence (X-axis) and $2.0{\times}10^0$ to $4.0{\times}10^2$ PMT 4 fluorescence (Y-axis). In the comparison of the number of the tested bacteria detected by FCM (viability assessment) and plate culture (cultivability assessment), the number of bacteria detected by FCM well represented the number of bacteria that was detected by the colony forming unit (CFU) counting method when bacteria were exposed to isopropyl alcohol and silver/copper cations. Consequently, it is concluded that the application of FCM to monitor the functional effect of disinfectants on the physiological status of target bacteria can offer more rapid and reliable data than the plate culture colony counting method.

• Journal of Elementary Mathematics Education in Korea
• /
• v.15 no.1
• /
• pp.1-18
• /
• 2011

The purpose of this study was to investigate the effects of estimation strategy on placing decimal point in multiplication and division of decimals. To examine the effects of improving calculation ability and reducing decimal point errors with this estimation strategy, the experimental research on operation with decimal was conducted. The operation group conducted the decimal point estimation strategy for operating decimal fractions, whereas the control group used the traditional method with the same test paper. The results obtained in this research are as follows; First, the estimation strategy with understanding a basic meaning of decimals was much more effective in calculation improvement than the algorithm study with repeated calculations. Second, the mathematical problem solving ability - including the whole procedure for solving the mathematical question - had no effects since the decimal point estimation strategy is normally performed after finishing problem solving strategy. Third, the estimation strategy showed positive effects on the calculation ability. Th Memorizing algorithm doesn't last long to the students, but the estimation strategy based on the concept and the position of decimal fraction affects continually to the students. Finally, the estimation strategy assisted the students in understanding the connection of the position of decimal points in the product with that in the multiplicand or the multiplier. Moreover, this strategy suggested to the students that there was relation between the placing decimal point of the quotient and that of the dividend.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.1
• /
• pp.113-135
• /
• 1998

There have been several research methodologies to measure the impacts of tourism development on the regional economy, which include input-output analysis, income multiplier analysis, labor creation effect analysis, etc. Most of these are based on regional economic indices using secondary data for medium to large regional units. This study tests the possibility of adopting tourist money now analysis, which encompasses a series of money flows beginning with tourists'payment for room, board and shopping, followed by tourist companies'expenditure for material and service purchase, wage, utilities, rent, tax and so forth, and by tourism workers'expenses for living and savings. This method makes it possible to reveal the amount and geographical extent of tourist money flow and draws some meaningful regional economic figures. Case studies of three torist developing areas show that it is utilized for impact studies for small scale areas.

• KDI Journal of Economic Policy
• /
• v.34 no.4
• /
• pp.27-68
• /
• 2012

This study outlines measures related to fiscal policies aimed at responding to the financial crisis according to the timing of commencement and then examines impacts of expansionary fiscal policies on macro variables so as to extract policy implications. The size of expansionary fiscal policy to respond to the financial crisis is found to total 59.8 trillion won (6.1% of GDP in 2007), among which a total of 30.5 trillion won was the increased fiscal expenditure made by the 2008 supplementary budget, the 2009 revised budget and the 2009 supplementary budget. In addition, tax reductions are found to be a total of 29.3 trillion won, mainly driven by the tax reforms in 2008 and 2009. Examining dynamic changes in macro variables caused by the temporary increase in fiscal expenditure and the tax reductions reveals that the increase effect of the real GDP growth rate brought by a temporary rise in fiscal expenditure excluding tax reduction effects turned out to be 1.1%p in 2009 and 0.3%p in 2010, compared to the period without the increase in fiscal expenditure. Meanwhile, when taking into account the effect of expansionary fiscal policies including tax reduction effects, the increase effect of real GDP turns out to be much higher. In the case of 2009, the real GDP rose additionally by 1.9%p, in which 1.1%p by the increase in fiscal expenditure and 0.8%p by tax reduction. Based on these results, the expansionary fiscal policy conducted during the financial crisis since the second half of 2008 can be seen to have played a significant role in helping the Korean economy post a higher-than-anticipated recovery pace from the economic slowdown triggered by the crisis.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.440-450
• /
• 2013

This purpose of this paper is to study the economic effects of port-liquid freight by focusing on Korea port and induce its policy implication. For this, 29 sectors' input-output tables with port-logistic sector as an individual sector is constructed. The direct industrial effects of port-liquid freight are analysed to be an increase in about 3.6billion dollars' worth of production of the port-logistic industry, an increase in about 1.98billion dollars' worth of value-added of the industry, and the creation of about 11,589 employment in the industry. Including the indirect effects, the total effects on Korea economy are estimated to be an increase in about 4.9 billion dollar's worth of production, an increase in about 2.4 billion dollars' worth of value-added and an increase in about 17,746 employment. The total effects of port-liquid freight on Korea economy is about 2.5-3.0% of that of port-logistic total freight. the results suggest tkat thought economic effects of port-liquid freightare not large, we have to focus on policy support for port of port-liquid freight.

• KDI Journal of Economic Policy
• /
• v.35 no.2
• /
• pp.71-105
• /
• 2013

Now that fiscal soundness is increasingly important influenced by the euro area fiscal crisis, early budget execution has been under the spotlight as a tool for economy control, other than typical expansionary method, such as supplementary budget. Basically, early budget execution is a fiscal policy instrument that reponses to economic fluctuations through modifying the inter-temporal allocation of fiscal expenditure within budget, without affecting fiscal soundness. This study empirically examines how effective the intert-temporal reallocation of fiscal expenditure is in economy control. Using Korea's Consolidated Fiscal data, the size of inter-temporal reallocation of fiscal expenditure is defined as changes of fiscal expenditure for one year excluding seasonal factors and used to explain real economic growth rate, a dependent variable. The result shows that the macroeconomic effect of the inter-temporal reallocation turns out meaningful in general, though some policy time lag exists. Meanwhile, a simulation using macroeconomic model finds that overall effect on economic growth is not large because increase in fiscal expenditure allocation at a certain point of time is canceled by the opposite direction within the same fiscal year. However, the inter-temporal reallocation is found to reduce volatility of key macroeconomic variables so as to contribute to partially stabilizing macroeconomy. In particular, such effect of economic stabilization seems to be highly apparent at the time of financial crisis, but not very noticeable in normal economic cycle.