• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.172-177
• /
• 2015

PURPOSE. The purpose of this study was to evaluate cell toxicity due to ion release caused by galvanic corrosion as a result of contact between base metal and titanium. MATERIALS AND METHODS. It was hypothesized that Nickel (Ni)-Chromium (Cr) alloys with different compositions possess different corrosion resistances when contacted with titanium abutment, and therefore in this study, specimens ($10{\times}10{\times}1.5mm$) were fabricated using commercial pure titanium and 3 different types of Ni-Cr alloys (T3, Tilite, Bella bond plus) commonly used for metal ceramic restorations. The specimens were divided into 6 groups according to the composition of Ni-Cr alloy and contact with titanium. The experimental groups were in direct contact with titanium and the control groups were not. After the samples were immersed in the culture medium - Dulbecco's modified Eagle's medium[DMEM] for 48 hours, the released metal ions were detected using inductively coupled plasma mass spectrometer (ICP-MS) and analyzed by the Kruskal-Wallis and Mann-Whitney test (P<.05). Mouse L-929 fibroblast cells were used for cell toxicity evaluation. The cell toxicity of specimens was measured by the 3-{4,5-dimethylthiazol-2yl}-2,5-diphenyltetrazolium bromide (MTT) test. Results of MTT assay were statistically analyzed by the two-way ANOVA test (P<.05). Post-hoc multiple comparisons were conducted using Tukey's tests. RESULTS. The amount of metal ions released by galvanic corrosion due to contact between the base metal alloy and titanium was increased in all of the specimens. In the cytotoxicity test, the two-way ANOVA showed a significant effect of the alloy type and galvanic corrosion for cytotoxicity (P<.001). The relative cell growth rate (RGR) was decreased further on the groups in contact with titanium (P<.05). CONCLUSION. The release of metal ions was increased by galvanic corrosion due to contact between base metal and titanium, and it can cause adverse effects on the tissue around the implant by inducing cytotoxicity.

• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.125-131
• /
• 2011

Objectives: The purpose of this study was to evaluate the effect of surface treatment of FRC-Post on bonding strength to resin cements. Materials and Methods: Pre-surface treated LuxaPost (DMG), Rely-X Fiber Post (3M ESPE) and self adhesive resin cement Rely-X Unicem (3M ESPE), conventional resin cement Rely-X ARC (3M ESPE), and Rely-X Ceramic Primer (3M ESPE) were used. After completing the surface treatments of the posts, posts and resin cement were placed in clear molds and photo-activation was performed. The specimens were sectioned perpendicular to the FRC-Post into 2 mm-thick segments, and push-out strength were measured. The results of bond strength value were statistically analyzed using independent samples t-test and oneway ANOVA with multiple comparisons using Scheffe's test. Results: Silanization of posts affect to the bond strength in LuxaPost, and did not affect in Rely-X Fiber Post. Rely-X ARC showed higher value than Rely-X Unicem. Conclusions: Silanization is needed to enhance the bond strength between LuxaPost and resin cements.

• Restorative Dentistry and Endodontics
• /
• v.36 no.2
• /
• pp.132-138
• /
• 2011

Objectives: The purpose of this study was to evaluate curing degree of three dual-cure resin cements with the elapsed time in self-cure and dual-cure mode by means of the repeated measure of micro-hardness. Materials and Methods: Two dual-cure self-adhesive resin cements studied were Maxcem Elite (Kerr), Rely-X Unicem (3M ESPE) and one conventional dual-cure resin cement was Rely-X ARC resin cement (3M ESPE). Twenty specimens for each cements were made in Teflon mould and divided equally by self-cure and dual-cure mode and left in dark, $36^{\circ}C$, 100% relative humidity conditional-micro-hardness was measured at 10 min, 30 min, 1 hr, 3 hr, 6 hr, 12 hr and 24 hr after baseline. The results of micro-hardness value were statistically analyzed using independent samples t-test and one-way ANOVA with multiple comparisons using Scheffe's test. Results: The micro-hardness values were increased with time in every test groups. Dual-cure mode obtained higher micro-hardness value than self-cure mode except after one hour of Maxcem. Self-cured Rely-X Unicem showed lowest value and dual-cured Rely-X Unicem showed highest value in every measuring time. Conclusions: Sufficient light curing to dual-cure resin cements should provided for achieve maximum curing.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.9-18
• /
• 2017

Objectives: This study evaluated color differences (${\Delta}Es$) and translucency parameter changes (${\Delta}TPs$) of various computer-aided design/computer-aided manufacturing (CAD/CAM) blocks after immersion in coffee. Materials and Methods: Eight CAD/CAM blocks and four restorative composite resins were evaluated. The CIE $L^{\ast}a^{\ast}b^{\ast}$ values of 2.0 mm thick disk-shaped specimens were measured using the spectrophotometer on white and black backgrounds (n = 6). The ${\Delta}Es$ and ${\Delta}TPs$ of one day, one week, and one month immersion in coffee or water were calculated. The values of each material were analyzed by two-way ANOVA and Tukey's multiple comparisons (${\alpha}=0.05$). The ${\Delta}Es$ after prophylaxis paste polishing of 1 month coffee immersion specimens, water sorption and solubility were also evaluated. Results: After one month in coffee, ${\Delta}Es$ of CAD/CAM composite resin blocks and restorative composites ranged from 1.6 to 3.7 and from 2.1 to 7.9, respectively, and ${\Delta}TPs$ decreased. The ANOVA of ${\Delta}Es$ and ${\Delta}TPs$ revealed significant differences in two main factors, immersion periods and media, and their interaction except for ${\Delta}Es$ of TEL (Telio CAD, Ivoclar Vivadent). The ${\Delta}Es$ significantly decreased after prophylaxis polishing except GRA (Gradia Block, GC). There was no significant correlation between ${\Delta}Es$ and water sorption or solubility in water. Conclusions: The ${\Delta}Es$ of CAD/CAM blocks after immersion in coffee varied among products and were comparable to those of restorative composite resins. The discoloration of CAD/CAM composite resin blocks could be effectively removed with prophylaxis paste polishing, while that of some restorative composites could not be removed.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.201-215
• /
• 1993

The health status of workers in a foundry was analyzed in a study which consisted of evaluations of respiratory health together with environmental measurements. The results from environmental measurements showed values exceeding permissible exposure limits. A t-test was done with log transformed and untransformed data to examine the statistical significance for the noncompliance with exposure standards. For the analysis of categorical health outcomes, $\chi$-square test with 2 $\times$ 2 tables and logistic regression analysis were employed. For continuous variables, multiple linear regression was done against assessed risk factors. Pros and cons of different parameters in the compliance (or noncompliance) testing were presented. Respiratory function did not show any relation with occupational exposures, which may be due to the healthy worker effects. Strategies for controlling time dependent covariates were discussed in relation to the healthy worker effect. The scope of statistical analysis in occupational health studies is still limited in Korea without a suitable external comparison group such as credible vital statistics for the whole nation. Internal comparisons between different exposure status often result in unstable estimates of effect, and proportional morbidity study is discussed as an alternative potential research tool.

• Journal of muscle and joint health
• /
• v.2 no.1
• /
• pp.41-72
• /
• 1995

The purpose of this study is to examine the effects of assertiveness training and value clarification training on nurse's conflict and conflict management mode. Fifty seven registered nurses participated in the study ; they were employed by three general hospital located in Daegu, Korea. The study employs two treatment groups. The assertiveness training group consisted of subjects who participated in 90-120 minutes sessions of assertiveness training nine times over five weeks. The other treatment group, was adiministed nine, 90-120 minutes sessions of value clarification during the same period. For the control group, nursing subjects were appointed the training after five weeks. Pre-test evaluation were administered to all subjects in three groups prior to one week of the treatment. Role conflict Inventory-general(RCI-G) and Communication Conflict Inventory-general (CCI-G) measure nurse's conflict management mode. Post-test evaluation were administered to all subjects in three groups two weeks after the last session by Role Conflict Inventory-Specific(RCI-S), Communication Conflict Inventory-Specific (CCI-S), Management Model-Specific(CMMI-S). The analysis of variance(ANOVA) and covariance(ANCOVA) on gain scores were running the SPSS program. In order to test statistical differences among mean scores of the scales obtained after treatment, multiple comparisons were carried out by Turkey method. Conclusions obtained from the results are as follows. 1. The assertiveness training and the value clarification training were effective in decreasing the nurse's role conflict. The value clarification was more effective than the assertiveness training in decreasing the nurse's role conflict. 2. Both assertiveness training and value clarification training were effective in decreasing nurse's communication conflict. There was, however, no differences between assertiveness training and value clarification training in decreasing the nurse's communication conflict. 3. The assertiveness training and the value clarification training were quite effective in compromizing and collaborating conflict management mode, to reducing the withdrawl and accomodate, force and accomodate conflict management mode to conflict. There was no difference in the effectiveness of assertiveness training and value clarification. In assessing the effects of the treatments, this study employed different measurements. It is unclear whether the measurement affected the test results. It is worth conducting a further test using the same measurements. The results of future studies can be compared with those of this study. The homogeneity of the control group and treatment group is questionable. Futher studies may employ homogeneous sample group to evaluate whether the sample characteristics bias the test results. Assertiveness training or value clarification training for nurses can be utilized in nursing intervention.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.36-48
• /
• 2008

Variable Message Signs(VMS) is one of the important subsystems of Intelligent Transportation Systems (ITS), which is useful for providing drivers with real-time information on traffic, roadway or weather conditions. In order to maximize the effectiveness of the VMS system, it is required to reflect drivers's preference on designing and operating the system. In this context, this study was conducted to develop strategies to deliver the messages in an efficient manner while many other previous studies focused primarily on the contents of the messages, from drivers's perspectives. Drivers's preference on message expression formats and message display orders were investigated through image analysis in the perspectives of a total of 40 subjects. With respect to message expression formats, drivers preferred Gulim or Dodum in font style, middle arrangement of the letters, pictogram combination as opposed to letters only, blank time less than 0.5 sec, appearing message in animation effect, messages in single phase, non-flashing message. In the matter of message display orders, drivers preferred to obtain link or traffic information in the lust place. Then, they desired to be informed of roadway condition and instructions or recommendations for drivers to cope with unexpected events among various messages for traffic condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.12
• /
• pp.1923-1932
• /
• 2019

Objective: We investigated visual marbling level (VML) influence on pork loin physicochemical traits, consumer palatability responses, VML liking, purchase intent, and their relationships. Methods: For each of five slaughtering dates, at 24-h postmortem, nine paired Duroc castrated male boneless Longissimus dorsi (LD) muscles were categorized into low (LM, score 1 to 2, n = 3), medium (MM, score 3 to 4, n = 3), and high (HM, score 5 to 6, n = 3) VML. Meat physicochemical quality traits and consumer responses (n = 389) on palatability and VML liking, and purchase intent were evaluated. The experiment was in randomized complete block design. Analysis of variance, Duncan's multiple mean comparisons, and correlation coefficients were determined. Results: VML correspond to crude fat (r = 0.91, p<0.01), but both were reversely related to moisture content (r = -0.75 and -0.91, p<0.01, respectively). As VML increased, ash (p<0.05) and protein (p = 0.072) decreased, pH and $b^{\star}$ increased (p<0.05), but drip, cooking (p<0.05) and thawing (p = 0.088) losses decreased. Among treatments, muscle fiber diameter, sarcomere length, total and insoluble collagen contents, $L^{\star}$, and $a^{\star}$ did not differ (p>0.05). Compared to the others, HM had lower collagen solubility percentage (p<0.05), but similar (p>0.05) Warner-Bratzler shear force (WBSF). No differences (p>0.05) were found in juiciness, overall flavor, oiliness, and overall acceptability, but HM was more tender (p<0.05) than the others. Based on VML, consumers preferred MM to HM (p<0.05), while LM was similar to MM and HM (p>0.05). Corresponding to VML preference (r = 0.45, p<0.01), consumers (83%) would (p<0.01) definitely and probably buy MM, over LM (74%), and HM (68%), respectively. Conclusion: Increasing VML in pork LD altered its chemical composition, slightly increased pH, and improved water holding capacity, thereby improving its tenderness acceptability. Marbling might reduce chewing resistance, as lower collagen solubility in HM did not impact tenderness acceptability and WBSF. While HM was rated as most tender, consumers visually preferred and would purchase MM.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.10
• /
• pp.1495-1505
• /
• 2019

The Burkholderia cepacia complex (BCC) is capable of remaining viable in low-nutrient environments and harsh conditions, posing a contamination risk in non-sterile pharmaceutical products as well as a challenge for detection. To develop optimal recovery methods to detect BCC, three oligotrophic media were evaluated and compared with nutrient media for the recovery of BCC from autoclaved distilled water or antiseptic solutions. Serial dilutions ($10^{-1}$ to $10^{-12}CFU/ml$) of 20 BCC strains were inoculated into autoclaved distilled water and stored at $6^{\circ}C$, $23^{\circ}C$ and $42^{\circ}C$ for 42 days. Six suspensions of Burkholderia cenocepacia were used to inoculate aqueous solutions containing $5{\mu}g/ml$ and $50{\mu}g/ml$ chlorhexidine gluconate (CHX) and $10{\mu}g/ml$ benzalkonium chloride (BZK), and stored at $23^{\circ}C$ for a further 199 days. Nutrient media such as Tryptic Soy Agar (TSA) or Tryptic Soy Broth (TSB), oligotrophic media (1/10 strength TSA or TSB, Reasoner's $2^{nd}$ Agar [R2A] or Reasoner's $2^{nd}$ Broth [R2AB], and 1/3 strength R2A or R2AB) were compared by inoculating these media with BCC from autoclaved distilled water and from antiseptic samples. The recovery of BCC in water or antiseptics was higher in culture broth than on solid media. Oligotrophic medium showed a higher recovery efficiency than TSA or TSB for the detection of 20 BCC samples. Results from multiple comparisons allowed us to directly identify significant differences between TSA or TSB and oligotrophic media. An oligotrophic medium pre-enrichment resuscitation step is offered for the United States Pharmacopeia (USP) proposed compendial test method for BCC detection.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.933-943
• /
• 2021

Objective : Percutaneous pedicle screw (PPS) fixation is a needle based procedure that requires fluoroscopic image guidance. Consequently, radiation exposure is inevitable for patients, surgeons, and operation room staff. We hypothesize that reducing the production of radiation emission will result in reduced radiation exposure for everyone in the operation room. Research was performed to evaluate reduction of radiation exposure by modifying imaging manner and mode of radiation source. Methods : A total of 170 patients (680 screws) who underwent fusion surgery with PPS fixation from September 2019 to March 2020 were analyzed in this study. Personal dosimeters (Polimaster Ltd.) were worn at the collar outside a lead apron to measure radiation exposure. Patients were assigned to four groups based on imaging manner of fluoroscopy and radiation modification (pulse mode with reduced dose) : continuous use without radiation modification (group 1, n=34), intermittent use without radiation modification (group 2, n=54), continuous use with radiation modification (group 3, n=26), and intermittent use with radiation modification (group 4, n=56). Post hoc Tukey Honest significant difference test was used for individual comparisons of radiation exposure/screw and fluoroscopic time/screw. Results : The average radiation exposure/screw was 71.45±45.75 µSv/screw for group 1, 18.77±11.51 µSv/screw for group 2, 19.58±7.00 µSv/screw for group 3, and 4.26±2.89 µSv/screw for group 4. By changing imaging manner from continuous multiple shot to intermittent single shot, 73.7% radiation reduction was achieved in the no radiation modification groups (groups 1, 2), and 78.2% radiation reduction was achieved in the radiation modification groups (groups 3, 4). Radiation source modification from continuous mode with standard dose to pulse mode with reduced dose resulted in 72.6% radiation reduction in continuous imaging groups (groups 1, 3) and 77.3% radiation reduction in intermittent imaging groups (groups 2, 4). The average radiation exposure/screw was reduced 94.1% by changing imaging manner and modifying radiation source from continuous imaging with standard fluoroscopy setting (group 1) to intermittent imaging with modified fluoroscopy setting (group 4). A total of 680 screws were reviewed postoperatively, and 99.3% (675) were evaluated as pedicle breach grade 0 (<2 mm). Conclusion : The average radiation exposure/screw for a spinal surgeon can be reduced 94.1% by changing imaging manner and modifying radiation source from real-time imaging with standard dose to intermittent imaging with modified dose. These modifications can be instantly applied to any procedure using fluoroscopic guidance and may reduce the overall radiation exposure of spine surgeons.