• Journal of Sensor Science and Technology
• /
• v.4 no.4
• /
• pp.47-54
• /
• 1995

Sensory measurements are inevitably uncertain, and this may decrease the reliability of sensor feedback systems. In this paper we present a method to achieve reliable measurements using multiple sensors. Assuming sensors with unknown characteristics in dynamic surroundings, readings from the sensors are clustered and fused with the estimated degrees of credit. In the experiment performed with logical sensors the technique proposed is employed to adaptively estimate the measurand under the circumstances where an existing probabilistic technique is difficult to be applied. The technique proposed may be useful for automatic systems working in unstructured environments - for example, sensory robots employed for intelligent manipulation.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.271-278
• /
• 2012

Recently, infrared (IR)-based depth sensors have proliferated as consumer electronics thanks to decreased price, which led to various applications including gesture recognition in television virtual studios. However, the depth sensors fail to capture depth information correctly under strong light conditions emitting infrared light which are very common in television studios. This paper analyzes the mechanism of such interference between the depth sensors relying on certain IR frequencies and infrared light emitting sources, and provides methods to get correct depth information by applying filters. Also, it describes experiment methods and presents the results of applying multiple combinations of filters with different cut-off frequencies. Finally, it proves that the interference due to IR can be filtered out using proposed filtering method practically by experiment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.315.2-315.2
• /
• 2014

Pt-functionalized ZnS nanowires were synthesized on Au-deposited c-plane sapphire substrates by thermal evaporation of ZnS powders followed by wet Pt coating and annealing. The $NO_2$ gas sensing properties of multiple-networked Pt-functionalized ZnS nanowire sensors were examined. Scanning electron microscopy showed the nanowires with diameters of 20-80 nm. Transmission electron microscopy and X-ray diffraction showed that the nanowires were wurtzite-structured ZnS single crystals. The Pt-functionalized ZnS nanowire sensors showed enhanced sensing performance to $NO_2$ gas at $150^{\circ}C$ compared to pristine ZnS nanowire sensors. Pristine and Pt-functionalized ZnS nanowire sensors showed responses of 140-211% and 207-488%, respectively, to 1-5 ppm $NO_2$, which are better than or comparable to those of many oxide semiconductor sensors. In addition, the underlying mechanism of the enhancement of the sensing properties of ZnS nanowires by Pt functionalization is discussed.

• Smart Structures and Systems
• /
• v.1 no.4
• /
• pp.385-404
• /
• 2005

The paper presents a model to calculate reinforcement strain using measured crack width in members under applied tension, flexure, and/or shear stress. Crack mapping using a new type of distributed coaxial cable sensors for health monitoring of large-scale civil engineering infrastructure was recently proposed and developed by the authors. This paper shows the results and performance of such sensors mounted on near surface of two flexural beams and a large scale reinforced concrete box girder that was subjected to cyclic combined shear and torsion. The main objectives of this health monitoring study was to correlate the sensor's response to strain in the member, and show that magnitude of the signal's reflection coefficient is related to increases in applied load, repeated cycles, cracking, and reinforcement yielding. The effect of multiple adjacent cracks, and signal loss was also investigated. The results shown in this paper are an important step in using the sensors for crack mapping and determining reinforcement strain for in-situ structures.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.184-188
• /
• 2008

Performance degradation of concrete structures is generally caused by structural deteriorations, such as cracks. It may result in serious defects of concrete structures. Methods of damage detection are used a visual angle of human or non-destructive test, and they are using various sensors. Problems of crack damage detection are occurred to directions of cracks by using 1 axial type of accelerometer in concrete element. In addition, these sensors are not used to occurring fire in RC building. Thermocouple sensors are able to using measurement of temperature in fire, and then deformations of main element and structures are not used. In this study, fundamental studies for development of multiple function sensor using 3 axial type of accelerometer and electric resistance property of thermocouple sensors are discussed estimation to stability of structures when happened form active load or fire, and so on.

• Journal of Sensor Science and Technology
• /
• v.24 no.4
• /
• pp.252-257
• /
• 2015

This paper proposes a single slope A/D converter (SSADC) that is possible to process the signal of the ultraviolet, visible and infrared rays with a single chip. And the proposed SSADC is a type of single channel ADC. In the conventional SSADC, it is possible to process the only one signal with a kind of the sensor because the speed of the operating frequency and the slope of ramp signal generated by the ramp generator are fixed. In order to improve the disadvantages, a ramp generator which has variable slope in ramp function is designed and $3{\times}1$ MUX(multiplexer) is adopted so that we can change the speed of the operating frequency and the slope of ramp signal. Therefore, the multiple signal processing of the wanted sensors can be possible. The designed circuit is layout by the $0.35-{\mu}m$ CMOS 2-poly 4-metal technology process and is checked through DRC and LVS tools.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.4
• /
• pp.65-74
• /
• 2010

At the aim of solving the problems appearing in traditional optical motion capturing systems such as the interference among multiple patches and the complexity of sensor and patch allocations, this paper proposes a new motion capturing system which is composed of a single camera and multiple motion sensors. A motion sensor is consisted of an acceleration sensor and a gyro sensor to detect the motion of a patched body and the orientation (roll, pitch, and yaw) of the motion, respectively. Although Image information provides the positions of the patches in 2D, the orientation information of the patch motions acquired by the motion sensors can generate 3D pose of the patches using simple equations. Since the proposed system uses the minimum number of sensors to detect the relative pose of a patch, it is easy to install on a moving body and can be economically used for various applications. The performance and the advantages of the proposed system have been proved by the experiments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.6
• /
• pp.561-566
• /
• 2016

A subway platform is equipped with screen doors in oder to avoid accidents of passengers, where Area sensors are installed for detecting obstacles in the screen doors. However, there exist frequent operating errors in screen doors due to dusts, sunlight, snow, and bugs. It is required to develope a detection device which reduces errors and elaborates detection function. In this paper, we compared the detection rates of the Area sensor the 3D sensor using CCTV-based image data with installing sensors at the screen door in Munyang station Daegu, where 3D sensor is applied with the space division multiple detection algorithms. It is measured that the detection rate of 3D sensor and Area sensor is approximately 89.61% and 78.88%, respectively. The results confirmed that 3D senor has higher detection rate compared with Area sensor with the rate of 6.87~9.79%, and 3D sensor has benefit in the aspect of installation fee.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.298-306
• /
• 1997

Ultrasonic sensors are widely used in various applications due to advantages of low cost, simplicity in construction, mechanical robustness, and little environmental restriction in usage. But the main purposes of the noncontact sensors are rather narrowly confined within object detection and distance measurement. For the application of object recognition, ultrasonic sensors exhibit several shortcomings of poor directionality which results in low spatial resolution of an object, and specularity which gives frequent erroneous range readings. To resolve these problems in object recognition, an array of the sensors has been used. To improve the spatial resolution, more number of sensors are used in essence throughout the various devices of the sensor arrays. Under the disguise of a fixed number of the sensors, the array can be shifted mechanically in several steps. In this paper we propose a practical sensor resolution enhancement method using an electronic circuit accompanying the sensor array. The circuit changes the transmitter output voltage in several steps. Using the known sensor characteristics, a set of different return echo signals provide enhanced spatial resolution. The improvement is obtained without the cost of the increased number of the sensors nor extra mechanical devices.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1531-1538
• /
• 2015

In this paper, we proposed receiver structure based on an iterative turbo equalization to cope with phase difference between two sensors in MIMO underwater communication channel. In a space-time coded system, it is often assumed that there are no phase errors among the multiple transmitter and receiver chains. In this paper, we have studied the effect of the phase errors between different transmit sensors and different propagation paths in the environment of MIMO underwater communication system, and have shown through BER performance by computer simulations that the bit-error-rate performance can be severely degraded. A decision-directed estimation and compensation algorithm has been proposed to minimize their effects on the system performance. In this paper, we investigate the phase differences and their effects on multiple-input and multiple-output systems, and propose a compensation algorithm for underwater channel model to minimize their effects.