• 대한산업공학회지
• /
• 제10권1호
• /
• pp.11-16
• /
• 1984

An economic model is developed for determining optimal locations of screening inspection stations in a multistage production system. The effect of screening inspection on the production rate is explicitly considered, and a fixed cost for maintaining an inspection station is assumed. The product is allowed to have multiple defects, each of which may be inspected at any inspection station after the defect-generating operation. The problem is formulated as a mixed 0-1 linear program which offers the advantage of versatility in handling various system constraints.

• Journal of Chest Surgery
• /
• 제24권8호
• /
• pp.819-823
• /
• 1991

The congenital cystic adenomatoid malformation of the lung is a rare disease, and is one of the most common congenital lung diseases which require prompt surgical intervention. The prognosis depends on its tissue type, prompt diagnosis and surgical intervention. The lesion consists of enlarged, variable sized multiple cyst with overgrowth of terminal bronchioles, like hamartoma. This disease can be associated with other vascular anomalies or other congenital defect especially in type II lesion We recently experienced one case of congenital cystic adenomatoid malformation The patient was 2 months old infant who showed respiratory distress without associated anomaly. After right upper lobe lobectomy, the patient was recovered uneventfully.

• Journal of Periodontal and Implant Science
• /
• 제27권1호
• /
• pp.117-128
• /
• 1997

Using barrier membrane, guided bone regeneration(GBR) and guided tissue regeneration(GTR) of periodontal tissue are now widely studied and good results were reported. In bone regeneration, not all cases gained good results and in some cases using GTR, bone were less regenerated than that of control. The purpose of this study is to search for the method to improve the success rate of GBR and GTR by examination of the cause of the failure. For these study, rats and beagle dogs were used. In rat study, 5mm diameter round hole was made on parietal bone of the rat and 10mm diameter of bioresorbable membrane was placed on the bone defects and sutured. In 1 ,2, 4 weeks later, the rats were sacrificed and Masson-Trichrome staining was done and inspected under light microscope for guided bone regeneration. In dog study, $3{\times}4mm^2$ Grade III furcation defect was made at the 3rd and 1th premolar on mandible of 6 beagle dogs. The defects were covered by bioresorbable membrane extending 2-3mm from the defect margin. The membrane was sutured and buccal flap was covered the defect perfectly. In 2, 4. 8 weeks later. the animals were sacrificed and undecalcified specimens were made and stained by multiple staining method. In rats. there was much amount of new bone formation at 2 weeks. and in 4 weeks specimen, bony defect was perfectly dosed and plenty amount of new bone marrow was developed. In some cases, there were failures of guided bone regeneration. In beagle dogs, guided tissue regeneration was incomplete when the defect was collapsed by the membrane itself and when the rate of resorption was so rapid than expected. The cause of the failure in GBR and GTR procedure is that 1) the membrane was not tightly seal the bony defects. If the sealing was not perfect, fibrous connective tissue infiltrate into the defect and inhibit the new bone formation and regeneration. 2) the membrane was too tightly attached to the tissue and then there was no space to be regenerated. In conclusion, the requirements of the membrane for periodontal tissue and bone regeneration are the biocompatibility, degree of sealingness, malleability. space making and manipulation. In this animal study. space making for new bone and periodontal ligament, and sealing the space might be the most important point for successful accomplishment of GBR and GTR.

• 품질경영학회지
• /
• 제33권4호
• /
• pp.88-95
• /
• 2005

Multistage screening is a common practice when a component has a critical effect on the function of the assembly. A defect in a component might incur malfunction of an electronic device, resulting in a great amount of loss. Multistage screening, including duplicated screening inspections, may provide a good solution for this problem when inspection errors are present. In the company studied here, the manufacturing process of the multiple layer chip capacitor includes two-stage screening. In the first stage, screening inspection is performed repeatedly until no defects are found in the lot. In the second stage, sampling inspection is performed by a group of experts prior to shipment. In this article, we review the procedure used in the field and suggest a revised model of the multiple screening procedure and solution method for this situation. The usefulness of the proposed model is discussed through a practical example.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.76-80
• /
• 2000

This paper describes a coordinate measuring technique based on optical triangulation using the two images. To overcome the defect of structured light system which measures coordinate point by point, light source is replaced by CCD camera. Pixels in CCD camera were considered as virtual light source. The overall geometry including two camera images is modeled. Using this geometry, the formula for calculating 3D coordinate of specified point is derived. In a word, the ray from a virtual light source was reflected on measuring point and the corresponding image point was made on the other image. Through the simulation result, validation of formula is verified. This method enables to acquire multiple points detection by photographing.

• Journal of Chest Surgery
• /
• 제12권2호
• /
• pp.105-109
• /
• 1979

Since 1973, 40 patients with Patent Ductus Arteriosus were operated in The Department of Thoracic and Cardiovascular Surgery, Korea University Medical College. Clinical analysis of these cases: 1. Age ranged from 8 months old to 28 years old Sex ratio was 22 females to 18 males. 2. Pulse pressure widening above 50 mmHg was appeared in 27 patients. In 31 patients, continuous machinery murmur was heard on left second and third intercostal space, but 9 patients has holosystolic murmur on left sternal border. 3. Retrograde Aortography was performed in 11 patients and right heart catheterization, 17 patients, In 8 patients, pulmonary hypertension [above 30 mmHg in` systole] was noted. 3 out of 8 patients was combined with Ventricular Septal Defect. Severe pulmonary hypertension [above 80mmHg in systole] was presented in 3 patients. 4. In 38 patients, operative method was performed with multiple suture ligation of PDA, and in 2 patients, suture closure through pulmonary arteriotomy under cardiopulmonary bypass. 5. One operative death occurred in a patient in this group. Cause of death was right heart failure after multiple suture ligation of PDA and pulmonary artery bandings.

• Journal of the Korean Data and Information Science Society
• /
• 제15권4호
• /
• pp.867-877
• /
• 2004

The sequential sampling inspection method is an extension of the multiple-sampling methods, and its theory is based on the sequential probability ratio test (SPRT) of Wald. In this paper, the characteristics of SPRT for testing the number of defects are approximated by using the estimated excess over the boundaries. The use of the estimated excess shows good performances in estimating the operating characteristic function and the average sample number of SPRT compared to the method by neglecting the excess. It also makes it possible to determine the boundary values which satisfy the desired error probabilities.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.251-256
• /
• 2006

The purpose of this study was to confirm multiple retention system of C-PAM, A-PAM and Inorganic micro particles vs. traditional micro particle system and dual polymer system by measuring retention, drainage and formation using RDA HSF and Techpap 2D -F Sensor The benefits of dual polymer system were easy to use, low chemical consumption and good retention property but defect was worse drainage property than inorganic microparticle systems. On the other hand, Inorganic microparticle system had benefit of good drainage effect but defects were difficult to use, high chemical consumption. Therefore, we tried to find optimal morphology of polyacrylamide and applied to multiple retention system of C-PAM, A-PAM and inorganic microparticles to compensate defects of both of retention systems. As a result, we found the performance of branched C-PAM, branched A-PAM and inorganic micro particle triple system was more appropriate than traditional inorganic mircoparticle systems or dual polymer systems by comparing retention, drainage and formation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.267-267
• /
• 2013

Band engineering of a nanowire is related to the question what is the minimum size of a nanowire-based device. At the subnanometer scale, there has been a long standing problem whether it is possible to both control an energy band of an isolated nanowire by a dopant and measure it using angle-resolved photoemission spectroscopy (ARPES). This is because an extra atom in the subnanometer wire plays as a defect rather than a dopant and it is challenging to assemble isolated subnanometer wires into an array for an ARPES measurement. We demonstrate that only one of multiple metallic subnanometer wires canbe controlled electronically by a dopant maintaining the whole metallic bands of other wires, which was observed directly by ARPES. Here,the multiple metallic subnanometer wires were produced on a stepped Si(111) surface by a self-assembly method. The selective band engineering proves that the selectively-controlled metallic wire is nearly isolated electronically from other metallic wires and an electronic structure controlcan be realized down to subnanometer scale.

• Journal of the Korean Data and Information Science Society
• /
• 제17권1호
• /
• pp.63-76
• /
• 2006

Marine production forecasting in fisheries is a crucial factor for managing and maintaining fishery resources. Thus this paper aims to generate a forecasting model of total marine production. The most generally method of time series model is to generate the most optimal single forecasting model. But the method could induce a different forecasting results when it does not properly infer a model To overcome the defect, I am trying to propose a single forecasting through multiple time series model. In other word, by comparing and integrating the output resulted from ARIMA and VAR model (which are typical method in a forecasting methodology), I tried to draw a forecasting. It is expected to produce more stable and delicate forecasting prospect than a single model. Through this, I generated 3 models on a yearly and monthly data basis and then here I present a forecasting from 2006 to 2010 through comparing and integrating 3 models. In conclusion, marine production is expected to show a decreasing tendency for the coming years.