• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.56-62
• /
• 2000

The purpose of this study was to assess the effects of restorative materials on the marginal leakage of wedge-shaped class V cavity. The study was performed in vitro in 25 defect-free permanent, extracted teeth. Wedge-shaped class V cavities were prepared and then the teeth were randomly selected and restored according to the following. Group A : restoration with Tetric Ceram(composite resin) Group B : restoration with Tetric flow(flowable resin) Group C : restoration with Compoglass after acid etching(compomer) Group D : restoration with Compoglass(compomer) Group E : restoration with Fuji II LC improved(resin-modified GIC) After thermocycling, the specimens were immersed in 5% basic fuchsin solution for 6 hours and sectioned longitudinally through the center of the restoration. The degree of marginal leakage was measured as the extent of dye penetration under the stereomicroscope. The data were analysed using one-way ANOVA. When significant differences found, multiple comparisons were made using Duncan's Multiple Range Test. The results were as follows: 1. The occlusal margins of all groups except for Fuji II LC improved showed lesser leakage than gingival margins and there was statistically significant difference(p<0.05). 2. At the occlusal margins, group A, B showed same marginal leakage scores, and others were decreased as group C, D, E in that order. There were statistically significant difference between group A, Band group D, E, group C and group E(p<0.05). 3. At the gingival margins, group B, C showed same marginal leakage scores, and others were decreased as group A, D, E in that order. But there was statistically significant difference between group B, C and group E(p<0.05). 4. In the Compoglass restoration, acid-etching technique was beneficial for marginal sealing ability at all of margins. But there was no statistically significant difference (p>0.05). In the restorations for wedge-shaped class V cavities, resin restoration with acid etching technique is recommended.

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.1-6
• /
• 2019

With the increase in number of the athletic population and elderly demographic, the demand for orthopedic splints, which are used to support a damaged body, has rapidly increased. Current splints mainly consist of inner and outer parts, which are multiple fabrics covered with polyurethane and nonwoven fabrics, respectively. However, the laminated materials with directly applied pre-polymer coating lead to a high defect rate because of the uneven thickness on the surface. Thus, this study proposes an indirect coating method using a precise clearance controller, which enables the even application of the coating material on multiple inner parts while maintaining a constant thickness. In addition, a roll-to-roll (R2R) technique is applied instead of the sewing mechanism to bond the inner and outer materials together and enhance the productivity in the final stage. In the advanced methods, there is a storage tank that contains polyurethane, a clearance controller, and pairs of rollers in the upper and lower rows. To improve the quality of the products and optimize the equipment, three controllable factors are determined: the viscosity of polyurethane, angle of the gap controller and number of pairs of rollers in the R2R system.

• Journal of Genetic Medicine
• /
• 제18권2호
• /
• pp.142-146
• /
• 2021

Alagille syndrome (AGS) is a rare autosomal dominant inherited disorder, with major clinical manifestations of bile duct paucity, cholestasis, cardiovascular anomaly, ophthalmic abnormalities, butterfly vertebrae, and dysmorphic facial appearance. It is caused by heterozygous mutations in JAG1 or NOTCH of the Notch signaling pathway presenting with variable phenotypic penetrance and involving multiple organ systems. The following case report describes a unique case of a 16-year-old female with AGS who presented with the primary complaint of renovascular hypertension. She had a medical history of ventricular septal defect and polycystic ovary syndrome. The patient had a dysmorphic facial appearance including frontal bossing, bulbous tip of the nose, a pointed chin with prognathism, and deeply set eyes with mild hypertelorism. Stenoocclusive changes of both renal arteries, celiac artery, lower part of the abdominal aorta, and left intracranial artery, along with absence of the left internal carotid artery were found on examination. Whole exome sequencing was performed and revealed a pathologic mutation of JAG1, leading to the diagnosis of AGS. Reverse phenotyping detected butterfly vertebrae and normal structure and function of the liver and gallbladder. While the representative symptom of AGS in most scenarios is a hepatic problem, in this case, the presenting clinical features were the vascular anomalies. Clinical manifestations of AGS are diverse, and this case demonstrates that renovascular hypertension might be in some cases a presenting symptom of AGS.

• Journal of Genetic Medicine
• /
• 제18권1호
• /
• pp.48-54
• /
• 2021

Genetic imbalances are a major cause of congenital and developmental abnormalities. We report the first case of a 3p26 microdeletion and 5q35.2q35.3 microduplication in a newborn with multiple congenital anomalies evaluated using chromosomal microarray analysis (CMA) and fluorescence in situ hybridization (FISH). The patient was born at 30 weeks and 2 days of gestation with a body weight of 890 g. He had symmetric intrauterine growth restriction, microcephaly, facial dysmorphism (hypertelorism, blepharophimosis, mild low-set ears, high-arched palate, and micrognathia), and right thumb polydactyly. Echocardiography revealed an atrial septal defect and patent ductus arteriosus. Furthermore, CMA revealed a concurrent microdeletion in 3p26 and a microduplication in 5q35.2q35.3. FISH analysis showed that these genetic changes resulted from a translocation mutation between chromosomes 3 and 5. The patient's mother had mild intellectual disability, short stature, and facial dysmorphism, while his father had a normal phenotype. However, parental FISH analysis revealed that the asymptomatic father carried a balanced translocation of chromosomes 3p26 and 5q35. CMA and FISH tests are useful for diagnosing neonates with multiple congenital abnormalities. Further parental genetic investigation and proper genetic counseling are necessary in cases of chromosomal abnormalities inherited from parental balanced translocations.

• Archives of Plastic Surgery
• /
• 제50권6호
• /
• pp.593-600
• /
• 2023

Background Soft tissue reconstruction around the knee area is still an open question, particularly in persistent infections and multiple reoperations scenario. Flap coverage should guarantee jointmobility and protection, even when foreign materials are implanted. The chimeric harvesting of the musculocutaneous gastrocnemius flap, based on the sural artery perforators, can extend its applicability in soft tissue reconstruction of the upper leg, overcoming the drawbacks of the alternative pedicled flaps. Methods A multicenter retrospective study was conducted enrolling patients who underwent to a pedicled, chimeric gastrocnemius musculocutaneous-medial sural artery perforator (GM-MSAP) or lateral sural artery perforator (GM-LSAP) flap for knee coverage in total knee arthroplasty (TKA) recurrent infections and oncological or traumatic defects of the upper leg from 2018 to 2021. Outcomes evaluated were the successful soft tissue reconstruction and flap complications. Surgical timing, reconstruction planning, technique, and rehabilitation protocols were discussed. Results Twenty-one patients were included in the study. Nineteen GM-MSAPs and 2 GM-LSAPs were performed (soft tissue reconstruction in infected TKA [12], in infected hardware [4], and in oncological patients [5]). Donor site was closed primarily in 9 cases, whereas a skin graft was required in 12. Flap wound dehiscence (1), distal flap necrosis (1), distal necrosis of the skin paddle (1), and donor site infection (1) were the encountered complications. Flap reraise associated to implant exchange or extensive debridement was successful without requiring any further flap surgery. Conclusion The propeller-perforator GM-MSAP offers qualitative defect coverage and easiness of multiple flap reraise due to skin availability and its laxity.

• 대한치과보철학회지
• /
• 제51권4호
• /
• pp.339-346
• /
• 2013

외상이나 선천적 결손에 의한 영구치아의 결손은 치료 방법과 적용 시기의 결정이 치료의 예후에 중요한 영향을 미친다. 본 증례는 성장기 환자로서 치아와 두개안면골 상태에 대한 정확한 진단 및 적절한 치료방법을 선택하고 성장 양식을 고려해서 일정기간 임시수복물과 임시 가철성 보철물을 사용하였으며, 성장 완료 후 임플란트 등을 이용한 고정성 보철수복 치료를 시행한 경우로써 교정과와 보철과의 협진 진료, 붕괴된 교합고경의 재확립 과정, 임플란트 보철치료 시 고려해야할 사항들에 대해 발표하고자 한다.

• Journal of Genetic Medicine
• /
• 제9권2호
• /
• pp.89-92
• /
• 2012

Campomelic dysplasia (CMD) is a rare, often lethal, genetic disorder characterized by multiple congenital anomalies and abnormal development of the reproductive organs in males. Mutations in the SOX9 gene are known to cause CMD. We present a Korean CMD girl with a normal 46,XX karyotype and a female reproductive organ phenotype. She was born at 2.35 kg at 38 weeks of gestation and showed characteristic phenotypes, including cleft palate, micrognathia, hypertelorism, flat nasal bridge, congenital bowing of limbs, hypoplastic scapulae, deformed pelvis, and 11 pairs of ribs. She also had an atrioseptal defect of the heart and marked laryngotracheomalacia requiring tracheostomy and tracheopexy. SOX9 mutation analysis revealed the presence of a novel nonsense mutation, $p.Gln369^*$, and the patient was genetically confirmed to have CMD. Although she showed marked failure to thrive and neurodevelopmental delay, she is now 40 months of age and is the only surviving patient with CMD in Korea.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.176-179
• /
• 2002

In recent years, an increasing amount of computer network research has focused on the problem of cluster system in order to achieve higher performance and lower cost. The load unbalance is the major defect that reduces performance of a cluster system that uses parallel program in a form of SPMD (Single Program Multiple Data). Also, the load unbalance is a problem of MPP (Massive Parallel Processors), and distributed system. The cluster system is a loosely-coupled distributed system, therefore, it has higher communication overhead than MPP. Dynamic load balancing can solve the load unbalance problem of cluster system and reduce its communication cost. The cluster systems considered in this paper consist of P heterogeneous nodes connected by a switch-based network. The master node can predict the average execution time of tasks for each slave node based on the information from the corresponding slave node. Then, the master node redistributes remaining tasks to each node considering the predicted execution time and the communication overhead for task migration. The proposed dynamic load balancing uses execution time prediction to optimize the task redistribution. The various performance factors such as node number, task number, and communication cost are considered to improve the performance of cluster system. From the simulation results, we verified the effectiveness of the proposed dynamic load balancing algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.107-109
• /
• 2004

In this paper, authors propose the sensor fusion system that can recognize multiple 3D objects from 2D projection images and tactile information. The proposed system focuses on improving recognition performance of 3D object. Unlike the conventional object recognition system that uses image sensor alone, the proposed method uses tactual sensors in addition to visual sensor. Neural network is used to fuse these informations. Tactual signals are obtained from the reaction force by the pressure sensors at the fingertips when unknown objects are grasped by four-fingered robot hand. The experiment evaluates the recognition rate and the number of teaming iterations of various objects. The merits of the proposed systems are not only the high performance of the learning ability but also the reliability of the system with tactual information for recognizing various objects even though visual information has a defect. The experimental results show that the proposed system can improve recognition rate and reduce learning time. These results verify the effectiveness of the proposed sensor fusion system as recognition scheme of 3D object.

• Imaging Science in Dentistry
• /
• 제49권4호
• /
• pp.323-329
• /
• 2019

Pierre Robin sequence (PRS) is characterized by the triad of micrognathia, glossoptosis, and airway obstruction. PRS does not have a single pathogenesis, but rather is associated with multiple syndromes. This report presents the case of a 35-year-old woman with PRS and scoliosis. Among the syndromes related to PRS, cerebro-costo-mandibular syndrome (CCMS), which is characterized by posterior rib gap defects and vertebral anomalies, was suspected in this patient. However, no posterior rib gap defect was detected on radiological examinations. Although over 80 cases of CCMS have been reported to date, few cases of PRS with scoliosis alone have been reported. Therefore, this report demonstrated the clinical, radiological, and cephalometric characteristics of an adult patient with PRS and scoliosis, but without rib anomalies.