• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.553-555
• /
• 2003

Mobile Ad hoc network에서 이동 노드들의 안정적이고 신뢰성이 높은 데이터 전송을 하기 위해서 multipath routing을 통하여 소스 목적지 노드간에 다중 경로를 구하고 기존의 라우팅 방법과 비교해 본다. 또한 다중 경로를 활용하는 방법과 경로구간의 링크 다운 시에 보다 빠른 복원을 할 수 있는 방법을 제시하고자 한다. 모바일 노드들의 이동성과 낮은 대역폭으로 인한 데이터 손실을 줄이는 방법으로 데이터 트래픽을 다중경로에 분산시키는 Traffic Load Balancing 방법과 데이터 전송 중에 발생하는 링크 다운 시에 새로운 경로를 찾는 메커니즘이 아닌 중간 경로에서 기존에 유효한 경로를 이용하는 Local recovery 방법을 소개하고자 한다.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.278-283
• /
• 2005

This paper proposes a blind channel estimation scheme for long code direct sequence code division multiple access (DS­CDMA) systems with multipath fading channels. This scheme combines the advantages of Toeplitz displacement and correlation matching methods to achieve improved performance. The basic idea is to remove the effects of noise and interferences with Toeplitz displacement operation and then estimate the multi path channel parameters with the correlation matching method. Simulation results are presented to show that the proposed scheme provides better MSE performance and robustness against the near-far problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2026-2034
• /
• 2015

Wireless sensor networks (WSNs) consist of a lot of sensor nodes having limited transmission range. So multi-hop transmission is used for communication among nodes but the multi-hop transmission degrade the end-to-end reliability. Multipath routing and opportunistic routing are typical approaches for guaranteeing end-to-end reliability in WSNs. The existing protocols improve the reliability effectively in small networks but they suffer from rapid performance degradation in large networks. In this paper, we propose the opportunistic multipath routing protocol for guaranteeing end-to-end reliability in large WSNs. Applying multipath routing and opportunistic routing simultaneously is very hard because their conflicting routing features. The proposed protocol applies these approaches simultaneously by section-based routing thereby enhancing end-to-end reliability. Additionally, the proposed protocol guarantees required reliability by the concept of section reliability. The section reliability over a certain level might satisfy required end-to-end reliability. Our simulation results show that the proposed protocol is more suitable for guaranteeing reliability than existing protocols in large-scale WSNs.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.131-140
• /
• 2017

Multipath TCP (MPTCP) is a transport layer protocol that simultaneously transmits data using multiple interfaces. MPTCP is superior to existing TCP in network environment with homogeneous subflows, but it shows worse performance compared to existing TCP in network environment with bufferbloat. If a bufferbloat occurs in one of the MPTCP multipaths, the packet will not arrive at the MPTCP receive buffer due to a sudden increase in delay time, resulting in a HoL blocking phenomenon. It makes the receive window of the other path to be zero. In this paper, we apply Adaptive Random Early Detection (ARED), Controlled Delay (CoDel) and Proportional Integral Controller Enhanced (PIE) among the proposed Active Queue Management (AQM) to limit the delay of bufferbloat path. Experiments were conducted to improve the performance of MPTCP in heterogeneous networks. In order to carry out the experiment, we constructed a Linux-based testbed and compared the MPTCP performance with that of the existing droptail.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.101-109
• /
• 2011

In this paper, we present a new routing protocol, multipath and multi-priority based routing protocol, (MMRP) for wireless multimedia sensor networks. The proposed MMRP chooses the multiple routing paths from source to the sink, then the selected paths are assigned with different priority levels depending upon the residual energy and transmission delay in the routing paths. That is, the highly prioritized I frames of the MPEG video are transmitted over the high priority routing paths, and other P and B frames are transmitted over the lower priority routing paths. The proposed MMRP protocol can be applied to time critical applications which require both lower latency and low power consumption over wireless multimedia sensor network. Simulations results of MMRP protocol show respectively an improvement of 23.48% and 23.11% in energy conservation and 81.6% and 32.01% improvement in latency as compared to protocols without and with multipath routing.

• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.374-385
• /
• 2003

The growing interest towards ultra-wideband (UWB) communications stems from its unique features such as baseband operation, ample multipath diversity, and the potential of enhanced user capacity. But since UWB has to overlay existing narrowband systems, multiple access has to be achieved in the presence of narrowband interference (NBI). However, existing baseband spreading codes for UWB multiple access are not flexible in handling NBI. In this paper, we introduce two novel spreading codes that not only enable baseband UWB multiple access, but also facilitate flexible NBI cancellation. We construct our codes using a single carrier or multiple carriers (SC or MC), which can be implemented with standard discrete-cosine transform (DCT) circuits. With our SC/MC codes, NBI can be avoided by simply nulling undesired digital carriers. Being digital, these SC/MC codes give rise to multiband UWB systems, without invoking analog carriers. In addition, our SC/MC codes enable full multipath diversity, and maximum coding gains. Equally attractive is their capability to reduce the number of interfering users, with simple matched filter operations. Comprehensive simulations are also carried out to corroborate our analysis.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.167-173
• /
• 2003

We treat the problem of channel estimation and interference cancellation in multiuser ultra-wide-band (UWB) communication systems over multipath fading channels. The UWB system under consideration employs a random time-hopping impulse radio format. We develop a channel estimation method based on linear weighted algorithm. An iterative channel estimation and interference cancellation scheme is proposed to successively improve the receiver performance. We also consider systems employing multiple transmit and/or receive antennas. For systems with multiple receive antennas, we develop a diversity receiver for the wellseparated antennas. For systems with multiple transmit antennas, we propose to make use of Alamouti’s space-time transmission scheme, and develop the corresponding channel estimation and interference cancellation receiver techniques. Simulation results are provided to demonstrate the performance of various UWB receiver techniques developed in this paper.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.385-395
• /
• 2012

This paper tackles the problem of generating shared secret keys based on the physical characteristics of the wireless channel. We propose intelligent quantization mechanisms for key generation, achieving high secret bits generation rate. Moreover, some practical issues affecting the performance of the key generation mechanism are deeply investigated. Mainly, we investigate the effects of delay and mobility on the performance and we enhance the key generation mechanism accordingly. As a result, this paper presents a framework towards robust key generation from multipath wireless channels.

• Journal of Communications and Networks
• /
• v.9 no.1
• /
• pp.28-33
• /
• 2007

Estimated channel information, especially multipath length and multipath channel of the desired user, is necessary for most previously reported linear blind multiuser detectors in code division multiple access (CDMA) systems. This paper presents a new blind intersymbol decorrelating detector in asynchronous CDMA systems, which uses the cross correlation matrix of the consecutive symbols. The proposed detector is attractive for its simplicity because no channel estimation is required except the synchronization of the desired user. Compared with other reported multiuser detectors, simulation results show that the proposed detector provides a good performance when the active users have significant intersymbol interference and the multipath length is short.

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.191-197
• /
• 2013

In this paper, a mobile relay station (MRS) for vehicles with a beamforming antenna is considered to increase the reliability of the transmission link, particularly for the MRS at the cell boundary. A cell searching and direction-of-arrival estimation method for an MRS with a uniform linear array is proposed for OFDM-based cellular systems in a multipath environment, even with the existence of the symbol timing offsets and carrier frequency offsets. The performance of the proposed method is evaluated by computer simulation using the standard profile of IEEE 802.16e.