• 한국세라믹학회지
• /
• 제44권3호
• /
• pp.182-187
• /
• 2007

10 mol% $Gd_{2}O_{3}-CeO_{2}$ powder was sintered by microwave in a 2.45 GHz multimode cavity to develop a dense electrolyte layer for intermediate temperature solid oxide fuel cells (IT-SOFCs). Samples were sintered from $1100^{\circ}C$ upto $1500^{\circ}C$ by $50^{\circ}C$ difference and kept for 10 min and 30 min at the maximum temperature respectively. Theoretical density of the sample sintered at $1200^{\circ}C$ for 10 min was 95.4% and increased gradually upto 99% in the sample sintered at $1500^{\circ}C$ for 30 min. All of sintered samples showed very fine microstructures and the maximum average grain size of the sintered sample at $1500^{\circ}C$ for 30 min was $(0.87{\pm}0.42){\mu}m$. Ionic conductvity of the samples were measured by DC 4 probe method.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.

• 대한의용생체공학회:의공학회지
• /
• 제16권1호
• /
• pp.67-76
• /
• 1995

Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd: YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as BrJ, and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased. To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained.

• 한국안광학회지
• /
• 제10권2호
• /
• pp.119-126
• /
• 2005

2개사 칼라콘택트렌즈에 대한 물성적 특성을 평가 비교하였다. 제조된 인공누액을 사용하여 단백질 침착율과 습윤성, 주사전자현미경과 원자간력현미경을 이용하여 렌즈의 표면 거칠기를 관찰하였다. 결과는 다른 특성들은 일반 소프트콘택트렌즈와 비교해서 큰 차이를 보이지 않았으나 주사전자현미경적 관찰에서 건조시 심한 균열을 보였다. 원자간력현미경적 관찰에서 렌즈 표면요철은 발견되지 않아 표면거칠기는 일반 소프트콘택트렌즈와 차이가 없었다. 렌즈 앞면과 뒷면에 대한 염료 침착을 확인한 결과 염료는 렌즈내부에 존재함을 알 수 있었다.

• 한국항해항만학회지
• /
• 제32권9호
• /
• pp.723-727
• /
• 2008

Sensing performances of evanescent field absorption (EFA) hetero-core fiber sensor has been presented based on EFA by changing the length and the core diameter of the single mode fiber. Experimental results have demonstrated a good feature in their relationship between the length and the core diameter of the single mode fiber. The sensor consists of 2 fiber optics which have the same cladding diameter of $125{\mu}m$ However one fiber optic used is single mode and has varying core diameter ranging from 3.3 to $5.6{\mu}m$. The other fiber is multimode type and has a thicker fixed core diameter of $62.5{\mu}m$. The 2 fiber optics are thermally spliced together. Experiments conducted to measure the resonance wavelength were carried out over a range of refractive index, to find the optimum sensing length Experiments show that core diameter of the single mode fiber and sensing length offects the linearity and sensitivity.

• 천문학회지
• /
• 제26권2호
• /
• pp.115-134
• /
• 1993

The light curve and radial velocity curve of multiperiodic dwarf cepheid VI719 Cyg (HD200925) with peculiar light curve have been reanalyzed in order to identify the oscillation modes to confirm the helium settling within the envelope. To do these, through the period search for the photometric and radial velocity data from the literature, two different periods were determined and the oscillation modes corresponding to the first and second periods were identified as the fundamental and first radial overtones. Hence the helium settling within the envelope was confirmed from the period ratio. The color excess, metallicity, effective temperature, and surface gravity corresponding to two different modes were determined and it was found that these parameters almost do not depend upon different oscillation mode. By utilizing the surface brightness method, we investigated the variation of angular diameter and radial displacement and it was found that the angular variation is very peculiar. Also by referring to the stellar models, mass and age were determined as $2.7M_{\bigodot}$ and 0.42 Gyr respectively which make this variable star heavier and younger than other multimode dwarf cepheids. Preliminary spectroscopic CCD observations were carried out and it was found that Mg in VI719 Cygni is nearly solar abundent according to the analysis of $5172.68{\AA}MgI$ line which is inconsistent with the photometric result. It was suggested that VI719 Cyg may be classified as a $\rho$ Pup stars according to the photometric characteristics.

• Wind and Structures
• /
• 제24권4호
• /
• pp.351-365
• /
• 2017

The minimization method is widely used to predict the dynamic characteristics of a system. Generally, data recorded by experiment (for example displacement) tends to contain noise, and the error in the properties of the system is proportional to the noise level (NL). In addition, the accuracy of the results depends on various factors such as the signal character, filtering method or cut off frequency. In particular, coupled terms in multimode systems show larger differences compared to the true value when measured in an environment with a high NL. The iterative least square (ILS) method was proposed to reduce these errors that occur under a high NL, and has been verified in previous research. However, the ILS method might be sensitive to the signal processing, including the determination of cutoff frequency. This paper focused on improving the accuracy of the ILS method, and proposed the modified ILS (MILS) method, which differs from the ILS method by the addition of a new calculation process based on correlation coefficients for each degree of freedom. Comparing the results of these systems with those of a numerical simulation revealed that both ILS and the proposed MILS method provided good prediction of the dynamic properties of the system under investigation (in this case, the damping ratio and damped frequency). Moreover, the proposed MILS method provided even better prediction results for the coupling terms of stiffness and damping coefficient matrix.

• Asian Journal for Public Opinion Research
• /
• 제6권1호
• /
• pp.1-17
• /
• 2018

As societal interest in inequality increases in Korea, both public and academic discussion on inequality is also on the rise. In order to more effectively discuss the problems of rising inequality, however, it is essential to study the consequences and implications of inequality. This study examines one of the consequences of inequality, particularly on individuals - the relationship between an individual's perception of inequality and his/her evaluation of societal health, such as social trust and social mobility. According to a statistical analysis of the Korean Academic Multimode Open Survey for Social Sciences (KAMOS), those who perceive the level of income and wealth inequality in Korea as more unequal tend to have a lower level of trust toward Korean society and Korean people, as well as a lower expectation for both intra- and intergenerational social mobility. This study, which shows that rising inequality could have a negative impact at the individual level, not only extends the scope of the consequence-of-inequality studies from the society-oriented toward the individual-oriented, but it also has significant implications for the field, suggesting a new direction for future studies.

• 한국음향학회지
• /
• 제32권6호
• /
• pp.484-493
• /
• 2013

통상의 수중 음향 센서는 단일 센서로는 음압의 크기만 측정할 뿐 외부 음원의 방향은 측정 할 수 없는 한계가 있다. 이에 본 논문에서는 링 센서를 사용하여 음원의 방향을 찾을 수 있는 구조를 제안하였다. 제안된 구조의 링 센서는 내부 압전 세라믹이 8등분되어 배열되어 있으며, 외부 음압에 대한 각 압전 세라믹 조각의 출력 전압을 적절히 조합하여 외부 음원의 방향을 파악할 수 있는 특성을 가진다. 나아가 링 센서의 반경, 압전 세라믹의 두께, 길이와 같은 구조 변수들의 영향을 분석하여, 벡터 센서의 감도를 향상 시킬 수 있는 방안을 제시하였다.

• 디지털산업정보학회논문지
• /
• 제12권4호
• /
• pp.81-87
• /
• 2016

Recently, as the heterogeneous network (HetNet) has been deployed widely to support various kinds of Radio Access Networks(RANs) with a combination of Macro, Pico, and/or Femto cells, research and standardization efforts have been very active regarding the concept of Licensed Shared Access (LSA) for supporting spectrum sharing. In order for a mobile device to efficiently support the spectrum sharing, the mobile device shall be reconfigurable, meaning that its radio application code has to be adaptively changed in accordance with the hopping of desired spectral band. Especially, Working Group 2 (WG2) of Technical Committee (TC) Reconfigurable Radio System (RRS) of European Telecommunications Standards Institute (ETSI) has been a main driving force for developing standard architecture for Multi-mode Mobile Device (MD) that can be applied to the LSA system. In this paper, we introduce the Multi-mode MD architecture for supporting LSA-based spectrum sharing. An implementation of a test-bed of Multi-mode MD is presented in order to verify the feasibility of the standard MD architecture for the purpose of LSA-based spectrum sharing through various experimental tests.