• 생체재료학회지
• /
• 제22권4호
• /
• pp.290-302
• /
• 2018

Background: The main purpose of drug delivery systems is to deliver the drugs at the appropriate concentration to the precise target site. Recently, the application of a thin film in the field of drug delivery has gained increasing interest because of its ability to safely load drugs and to release the drug in a controlled manner, which improves drug efficacy. Drug loading by the thin film can be done in various ways, depending on type of the drug, the area of exposure, and the purpose of drug delivery. Main text: This review summarizes the various methods used for preparing thin films with drugs via Layer-by-layer (LbL) assembly. Furthermore, additional functionalities of thin films using surface modification in drug delivery are briefly discussed. There are three types of methods for preparing a drug-carrying multilayered film using LbL assembly. First methods include approaches for direct loading of the drug into the pre-fabricated multilayer film. Second methods are preparing thin films using drugs as building blocks. Thirdly, the drugs are incorporated in the cargo so that the cargo itself can be used as the materials of the film. Conclusion: The appropriate designs of the drug-loaded film were produced in consideration of the release amounts and site of the desired drug. Furthermore, additional surface modification using the LbL technique enabled the preparation of effective drug delivery carriers with improved targeting effect. Therefore, the multilayer thin films fabricated by the LbL technique are a promising candidate for an ideal drug delivery system and the development possibilities of this technology are infinite.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.603-608
• /
• 2019

In this study, the multilayered thin films of (Ba,Sr)TiO3/K(Ta,Nb)O3 were fabricated by the sol-gel and spin coating methods, and their structural and electrical properties were investigated. The specimen showed polycrystalline X-ray diffraction (XRD) characteristics with a tetragonal structure. The average grain size and film thickness for one coating were about 30~40nm and 60nm, respectively. The phase transition temperature of specimen was lower than 10 ℃. The dielectric constant and loss at 20 ℃ of the specimen coated six times were 1,231 and 0.69, respectively. The rate of change in dielectric constant at an applied direct current (DC) voltage of the six times coated thin films was 17.3%/V. The electrocaloric effect was the highest around the temperature at which the remanent polarization rapidly changed. When an electric field of 660kV/cm was applied to the triply coated thin films, the highest electrocaloric property of 4.41 ℃ was observed.

• 비파괴검사학회지
• /
• 제34권3호
• /
• pp.233-240
• /
• 2014

나노/마이크로 소자의 개발이 활발해짐에 따라 나노/마이크로 박막의 기계적 물성의 정밀 측정에 대한 필요성이 점차 커지고 있다. 기존의 파괴적인 방법의 한계를 극복하기 위한 방법으로, 유도초음파를 이용한 비파괴적인 박막 물성 방법에 대한 관심이 늘어나고 있다. 유도초음파를 이용하여 박막의 물성을 측정하는 실험을 설계하거나, 물성 측정에 대한 실험 결과를 이해하는데 있어 박막의 분산선도를 이해하는 것은 필수적이라 할 수 있다. 본 연구에서는, 전달 행렬법을 이용하여 박막의 분산선도를 계산하는 방법을 제시하고, 이를 금속 박막에 적용하여 그 특성을 관찰하였다. 전달 행렬법을 이용하여 다층판에서의 주파수에 따라 유도초음파가 전파하는 속도를 계산하여 상용 프로그램과 비교하여 그 타당성을 확인하였다. 이러한 방법을 Si 기판 위에 증착된 Al 금속 박막에 적용하여 얻은 분산곡선의 분석을 통해, 박막의 두께 조건에 따른 모드와 분산 및 비분산 특성이 나타나는 구간을 관찰할 수 있었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.189-189
• /
• 2016

In this study, the Al-rich AlTiSiN thin films that consisted of TiN/AlSiN nano-multilayers were deposited on the steel substrate by magnetron sputtering, and their high-temperature oxidation behavior was investigated, which has not yet been adequately studied to date. Since the oxidation behavior of the films depends sensitively on the deposition method and deposition parameters which affect their crystallinity, composition, stoichiometry, thickness, surface roughness, grain size and orientation, the oxidation studies under various conditions are imperative. AlTiSiN nano-multilayer thin films were deposited on a tool steel substrate, and their oxidation behavior of was investigated between 600 and $1000^{\circ}C$ in air. Since the amount of Al which had a high affinity for oxygen was the largest in the film, an ${\alpha}-Al_2O_3-rich$ scale formed, which provided good oxidation resistance. The outer surface scale consisted of ${\alpha}-Al_2O_3$ incoporated with a small amount of Ti, Si, and Fe. Below this outer surface scale, a thin ($Al_2O_3$, $TiO_2$, $SiO_2$)-intermixed scale formed by the inwardly diffusing oxygen. The film oxidized slower than the $TiO_2-forming$ kinetics and TiN films, but faster than ${\alpha}-Al_2O_3-forming$ kinetics. During oxidation, oxygen from the atmosphere diffused inwardly toward the reaction front, whereas nitrogen and the substrate element of iron diffused outwardly to a certain extent.

• 한국결정성장학회지
• /
• 제19권2호
• /
• pp.70-74
• /
• 2009

Sol-gel 법으로 제조한 $Pb(Sc_{1/2}Nb_{1/2})O_3$(이하 PSN) sol을 이용하여 스핀 코팅법으로 Pt(111)/Ti/$SiO_2$/Si 기판위에 제조한 박막의 제조 공정에 따른 영향을 연구하였다. Pt 기판위에 PSN sol을 증착, 건조한 후에 $370^{\circ}C$에서 5분간 열처리를 행한 후 $10^{\circ}C/sec$의 급속 가열로 $600{\sim}700^{\circ}C$에서 최종 열처리한 경우에 박막은 (111)면으로 우선 배향하는 것으로 나타났다. 그러나 중간 열처리를 거치지 않고, 급속가열에 의한 최종 열처리만을 행한 경우에는 (100)면으로 우선 배향하는 것으로 나타났다. 한편, 중간 열처리 후 $4^{\circ}C/min$의 승온속도로 관상로에서 최종 열처리를 행한 경우에는 (111)면과 (100)면이 동시에 나타나는 것으로 나타났다. 동일한 조건하에서 박막의 두께는 모두 300로 중간 열처리 공정이 어떠한 영향도 미치지 않는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.197-197
• /
• 2010

Pb(Zr,Ti)O3/BiFeO3/(PZT/BFO) multilayer thin films were coated on Pt/Ti/SiO2/Si substrates by chemical solution deposition. With increasing the annealing temperature, the dielectric and leakage current density properties of multilayered PZT/BFO/PZT thin films were improved. The current density of the PZT/BFO/PZT filmannealing at $600^{\circ}C$ was about 189.39(x10-9A/cm2) at 10V. The relative dielectric constant and the dielectric loss of the PZT/BFO/PZT thin film annealing at $600^{\circ}C$ were about 318 and 0.161%, respectively.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.55-55
• /
• 2003

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 춘계학술발표회 초록집
• /
• pp.122-123
• /
• 2007

Bias voltage를 달리하여 cathodic arc plasma 방법으로 Si 기판 위에 성장시킨 TiCrAlSiN 코팅막의 미세구조를 투과전자현미경으로 관찰하였다. -200 V에서 0 V로 bias voltage가 변화함에 따라 'nano-multilayered' 구조가 무너지면서 '주상형(columnar)'구조로 코팅막의 미세구조가 변함을 알 수 있었고, EDS line scan을 통해 multilayer의 화학적 조성 변화를 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.248-252
• /
• 2005

The effects of electric field strength and mechanical compressive stress on the displacement of multilayered ceramic actuator, stacked alternatively 0.2 (PbM $n_{1}$3/N $b_{2}$3/ $O_3$)-0.8(PbZ $r_{0.475}$ $Ti_{0.525}$ $O_3$) ceramic thin films and 70Ag-30Pd electrodes were investigated. Because the actuators were designed to stack ceramic layer and electrode layer alternatively, the ceramic-electrode interfaces may act as a resistance to motion of domain wall. so the polarization and strain were affected by the amount of 180$^{\circ}$domain, electric field strength and mechanical compressive stress. Consequently, the change of polarization, displacement with respect to field strength, and mechanical compressive stress were likely to be caused by readiness of the domain wall movement around the ceramic-electrode interfaces.ces.

• 센서학회지
• /
• 제29권4호
• /
• pp.232-236
• /
• 2020

Three-dimensional (3D) multilayered Pt electrodes were fabricated to develop a porous electrode using a pattern-transfer printing process. The Pt thin films were deposited using a transferred sputtering pattern having a 250 nm line width on the substrate, and the uniform line patterns were efficiently transferred using our proposed method. Temperature-programmed desorption (TPD) analyses were used to evaluate the porosity of the electrodes. It was possible to distinguish between two resolved maxima at 168 and 227 ℃, which could be described in terms of desorption reactions on the Pt (111) planes. The results of the TPD analysis of the 3D and multilayered Pt electrodes prepared through transfer printing were compared to those of an electrode fabricated through screen printing using a commercial Pt-carbon paste commonly used as porous electrodes. It was confirmed that the 3D multilayered electrodes exhibited a desorption concentration approximately 100 times higher than that of the Pt-carbon composite electrode, and the desorption concentration increased by approximately 0.02 mg/mol per layer. The 3D multilayered electrode effectively functions as a porous electrode and a catalyst.