• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.763-769
• /
• 2000

The multifunctional cation exchangers, sulfonated polypropylene-g-(acrylic acid/styrene) [PP-g-(AAc/Sty)] were synthesized by the irradiational grafting of AAc and Sty onto PP staple fabric with electron beam accelerator and its subsequent sulfonation. The highest degree of grafting obtained was 190% at a monomer mixture of 30 vol% AAc: 70 vol% Sty and a solvent mixture of 30 vol% water : 70 vol% methanol and the degree of grafting decreased with an increase of the AAc content in the monomer mixture at constant solvent content. Maximum ion exchange capacity of the copolymer was 4.6 meq/g. The Li$^{+}$ adsorption ability of the copolymer synthesized in the study was the best among PP-g- AAc, sulfonated PP-g-Sty, and sulfonated PP-g-(AAc/Sty).).

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.273-276
• /
• 2011

Uniform Ag nanoparticles (< 10 nm) were effectively prepared in 1-amino-4-methylpiperazine as a solvent with multiple functions including reduction and stabilization. An Ag-complex such as $Ag_2(ehac)_2(eha)_2$ (ehac = 2-ethylhexylammonium carbamate; eha = 2-ethylhexylamine) was used as an Ag-precursor, whereas the usage of a salt such as $AgNO_3$ showed the formation of Ag nanoparticles in larger and irregular size (30 - 500 nm). The Ag nanoparticles (< 10 nm) prepared by using the Ag-complex could also be effectively stabilized by 1-amino-4-methylpiperazine. Transmission electron micrographs confirmed that the Ag particles were spherical and in the nanometer size.

• Composites Research
• /
• v.36 no.3
• /
• pp.162-166
• /
• 2023

Although composite materials are increasingly utilized in general high-strength structures, the demand of performance characteristics as the multifunctional materials has been increased especially in the area of complex electronic devices. While the heat dissipation properties of devices are typically required properties, control of thermal property of composite material especially in the vertical direction is one of the problems to be solved due to its lamination process. In this study, CFRP was manufactured using the Vacuum filtration method for three types of solvent and CFs. In the composite material manufacturing process, the effect of solvent was examined using three solvents where solvents are most frequently used for the dispersion of fibers. Morphology of fiber was observed through a microscope to confirm the arrangement of CFs in the vertical direction. The alignment of fiber was examined through the measurement of the thermal conductivity of the manufactured specimen. For the thermal conductivity measurement, the higher thermal conductivity was obtained with the lower aspect ratio of CF. For the thermal conductivity in the through-plane direction, 8.687 W/m·K, 10.322 W/m·K, and 13.005 W/m·K of thermal conductivity was measured in the DMF, NMP and Acetone, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.167.1-167.1
• /
• 2014

We report a facile method to fabricate superhydrophobic, transparent and conductive film using multi-walled carbon nanotubes (MWCNTs) which are coated by polydimethylsiloxane (PDMS). In order to prepare a film, PDMS coated MWCNTs were dispersed in solvents and the solution was drop-casted on substrates. It was demonstrated that the PDMS coating enhanced the dispersion of MWCNTs in diverse solvents such as dimethyl formamide(DMF) and acetone without the use of acids or surfactants, which are the common methods. In the case of DMF solvent, dispersion of MWCNT was improved by 40 % upon PDMS-coating of MWCNT. Enhanced dispersion of MWCNTs made it possible to fabricate transparent and conductive film homogeneously on the substrate and PDMS-coating on MWCNTs also made the surface hydrophobic. We can fabricate a uniform and multifunctional MWCNT film (transparent, conductive, superhydrophobic and flexible) which is applicable on large area without any physical damage and expensive equipment.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.938-945
• /
• 1996

The present studies are to describe the grafting reaction of styrene in various solvents to polypropylene fabric by the simultaneous method using Co-60. The influence of various factors such as absorbed dose, dose rate, type of solvent, acid and multifunctional monomer were evaluated. At constant absorbed dose, the grafting yield was found to be higher at low dose rate. The initial rate of grafting was found to be proportional to a 0.56 power of dose rate. The inclusion of mineral acid in the grafting solution led to an increase in radiation grafting yield at almost all monomer concentration examined. Multifunctional monomer was also effective to increase grafting yield. The addition of both acid and multifunctional monomer was found to accelerate the grafting yield much more than the separate addition of two additives.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.442-446
• /
• 2007

Alkali soluble and photo-curable polyesters were prepared from fluorene epoxy acrylate and various aromatic dianhydrides. To make a black matrix for LCD color-filter application, photo-resist solution was made by mixing synthesized polyester as binder, carbon black as pigment, initiator and multifunctional monomer in solvent. Black matrix pattern was formed on the glass substrate by lithography process. In this study, we synthesized various polyester-based binder polymers for LCD color-filter applications, and compared the analytical properties of those polymers and lithography patterns.

• Membrane Journal
• /
• v.33 no.3
• /
• pp.94-109
• /
• 2023

1,3-Dioxolane is an exciting material that has attracted widespread interest in the chemical, paint, and pharmaceutical industries as a solvent, electrolyte, and reagent because 1,3-dioxolane is not toxic, carcinogenic, explosive, auto-flammable, and multifunctional, and due to their excellent miscibility in most organic and aqueous solvent conditions. Recently, this material has received increasing attention as a CO₂-selective polymer precursor to separating CO₂ from flue gas and natural gas mixtures. Poly(1,3-dioxolane) (PDXL) possesses higher ether oxygen content than polyethylene oxide (PEO), which demonstrates superior membrane CO₂/N₂ separation properties owing to their polar ether oxygen groups exhibiting strong affinity toward CO₂. Thus, PDXL-based membranes displayed an outstanding CO₂ solubility selectivity over non-polar (N₂, H₂, and CH₄) gases. However, the polar groups of PDXL, like PEO, promote chain packing efficiency and cause polymer crystallization, thereby reducing its gas permeability, which should be improved. In this short review, we discuss the recent advancement and limitations of PDXL membranes in gas separation applications. To conclude, we provide future perspectives for inhibiting the limits of 1,3-dioxolane-based polymers in the CO₂ separation process.