• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.22-30
• /
• 2015

지금까지의 분리막 공정 모델링에 대한 연구는 주로 2성분계 원료의 분리공정에 집중되어 왔다. 실제 운전에 있어서는 2성분계 혼합물은 매우 드물며 다성분계 혼합물이 대부분이므로 막분리 공정의 설계를 위해서는 다성분계 막분리 공정에 대한 모델개발이 필수적이다. 본 연구에서는 중공사막을 이용하는 분리막 공정에서 다성분 혼합물 원료에 대한 분리공정 모델링을 수행하였다. 다양한 형태의 다성분 공정모델을 구현하였으며 실험결과를 이용하여 모델의 정확도 및 신뢰도를 조사하였다. 개발된 모델들은 원료 흐름의 유입조건과 다양한 운전조건에 대하여 안정적이고 실험 데이터에 근접한 모사결과를 보여 주었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.335-338
• /
• 2012

The present study focuses mainly on modeling the ordinary diffusion flux of species. According to CHEMKIN, both the mixture-averaged approach, Fick's formula, and the full multicomponent approach are implemented in the framework of opensource OpenFOAM. Also the Stefan-Maxwell approach is coded and validated together against measurements of laminar hydrogen jet flame. In the case of viscosity and conductivity of mixture, the mixture-averaged approach is applied and thermal diffusion is not considered in this work. Results show that there are no distinct deviations in three different approaches of diffusion of species in the present hydrogen flame condition.

• Nuclear Engineering and Technology
• /
• 제36권5호
• /
• pp.375-387
• /
• 2004

This paper presents a transient multicomponent mixture analysis tool developed to analyze the molecular diffusion, natural convection, and chemical reactions related to air ingress phenomena that occur during a primary-pipe rupture of a high temperature gas-cooled reactor (HIGR). The present analysis tool solves the one-dimensional basic equations for continuity, momentum, energy of the gas mixture, and the mass of each gas species. In order to obtain numerically stable and fast computations, the implicit continuous Eulerian scheme is adopted to solve the governing equations in a strongly coupled manner. Two types of benchmark calculations were performed with the data of prerious Japanese inverse U-tube experiments. The analysis program, based on the ICE technique, runs about 36 times faster than the FLUENT6 for the simulation of the two experiments. The calculation results are within a 10% deviation from the experimental data regarding the concentrations of the gas species and the onset times of natural convection.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 춘계학술발표대회 요약집
• /
• pp.117-117
• /
• 2003

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 요약집 춘계학술발표대회
• /
• pp.116-116
• /
• 2004

• Preventive Nutrition and Food Science
• /
• 제1권1호
• /
• pp.127-133
• /
• 1996

The development of high resolution capillary columns and a large variety of different detectors led to a strong position of gas chromatography in instrumental analysis. Every effort has been made to solve sophisticated separation problems by column switching. Nowadays, several systems are commercially available for this purpose. The principle and the capabilities of multidimensional gas chromatography(MDGC) are illustrated by different applications in the field of modern flavor and essential oil research.

• 한국세라믹학회지
• /
• 제14권3호
• /
• pp.163-168
• /
• 1977

As a wet chemical drying process "hot petroleum drying method" was applied and developed for preparing uniformly fine oxide powder with high purity and sinterreactivity. Using this method solution of sulfates was dried in hot petroleum bath (~17$0^{\circ}C$) to sulfate powder from which corresponding mullite doped by Fe3+ ion was formed. Particle size, shape, decomposition by heat, and phase identification of sulfate andoxide powders determined by DTA, TGA, X-ray diffraction, analysis and electron microscopy: sulfate powder prepared by this drying method is an intimate mixture of the amorphous form of uniformly and finely distributed spherical particles (0.05-0.1$\mu$). Mullitization with the sulfate powder occurs at 110$0^{\circ}C$ in air. The morphology of mullite particle made by firing the sulfate powder at 135$0^{\circ}C$ in oxygen atmosphere is granular of 0.1-0.3$\mu$ in size. This drying process proved to be a very effective method for preparing fine, homogeneous, and highly sinterreactive multicomponent oxide powder without conventional ceramic process of mixing, milling, and granulating. This process can be also applied for preparing electronic ceramic materials which are requisite for high purity and homogeneity.mogeneity.

• 한국응용과학기술학회지
• /
• 제3권2호
• /
• pp.23-28
• /
• 1986

The sulfuric acid sulfonation mixtures of 2-aminonaphthalene, contained 2-aminonaphthalene, Dahl's acid, Broenner's acid, amino-F-acid and Baden acid, can be determined quantitatively by multicomponent spectrophotometric analysis. The analysis was performed in diluted sodium hydroxide aqueous solution and based on the ultraviolet absorption of the sodium salts of each isomers. The determination of quantity of each isomers was performed by subjection the absorbances of the unknown mixture and of its constituents, gathered at a large number of wavelengths, to a least square treatment by an electronic personer computer. This method provided a rapid analysis of such complex mixture, and the standard deviation was ${\pm}1.65$ mole %.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.192-198
• /
• 1998

MRSM(modified response surface methodology)-2 model is presented for the prediction of boiling points in combustible solution of quaternary systems. This model requires only normal boiling points of pure substances and group-group parameters which are based on the group-group concepts without the use of experimental data under consideration. By means of this methodology, it is possible to predict the boiling points of the combustible mixture of quaternary systems by plotting of isothermal lines using computer graphics. The proposed methodology has been tested and compared successfully with reported boiling points in journals for the combustible solution of quaternary systems. It is hoped eventually that this methodology will permit prediction of the flash point and flammability limit for the combustible mixture of multicomponent systems.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.207-208
• /
• 2006

In this experimental work, the development of a multicomponent binder system based on high density polyethylene (HDPE) and paraffin wax for Powder Injection Molding of Alumina $(Al_2O_3)$ parts was carried out. The optimum composition of the injection mixture was established through mixing torque measurements and a rheological study. The maximum powder loading was 58 vol%. The miscibility of organic components and the optimum injection temperature was evaluated by thermal characterization of binder and feedstock. The thermal debinding cycle was developed on the basis of thermogravimetrical analysis of the binder. After sintering the densities achieved were closed to 98% of the theoretical one.