• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.9
• /
• pp.2422-2432
• /
• 1996

In this thesis, we analyze the Broadcast and Select Network(BSN) architecture coming up to the issues among those in the single-hip WDM networks and the degradation of performance in consequence of the traffic imbalance which well be able to be produced in these network. We propose WDM networks architecture which can support concurrency services by using Array Wavelength Tunable Filter(AWTF) with the parrallel hardware structure as a solution. For the sake of multichannel communications, we make use of the Single Control channel, Multiple Data channel(SCMD) scheme that is one of the channel architecture. Also, we compare and analize the throughput of Uniform & Nonuniform traffic conditions, and obtain the optimized number of AWTF being able to guarantee the Quality of Service(QoS) required by the enlargement of WDM netowrks and traffic imbalance. Therefore, we can make it possible that the design of the WDM networks with BSN architecture ensures the optimized performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1004-1011
• /
• 2006

In this study, we have performed a systematic case study on troubles and diagnoses of passenger car's engine based on OBD. We have acquired 1,242 data in order to analysis accurate troubles' causes and apposite diagnoses. 128 data of them are got using OBD apparatus, and the rest of them are collected on related website. As results, distribution on trouble cases shows bad idling(32%), poor acceleration(21%), stop in running(19%), faulty start(11%), inferior fuel economy(9%), and insufficient power(8%) in order of magnitude. And in the systematic cases, it is not difficult to detect troubles in a single part. But we know that special apparatus such as multichannel scanner is needed in complicated troubles. Furthermore we think that the survey is continued in various ways for more systematic case study on troubles and diagnoses.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.289-298
• /
• 2009

Optimal data processing parameters were designed to attenuate multiples in seismic data acquired in the south-eastern area of the East Sea, in 2008. Bunch of multiples caused by shallow sea water depth were perceived periodically up to two way travel time of 1,750 ms at every 250 ms over seismic traces. We abbreviated sea bottom multiple as SBM, Peg-leg multiple as PLM, and free-surface multiple as FSM. To attenuate these multiples, seismic data processing flow was constructed including NMO, stack, minimum phase predictive deconvolution filter and wave equation multiple rejections (WEMR). Prevalent multiples were suppressed by predictive deconvolution and remaining multiples were attenuated by WEMR. We concluded that combining deconvolution with WEMR was effective to a seismic data of study area. Derived parameter can be applied to the seismic data processing on adjacent survey area.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.638-642
• /
• 2005

For gas hydrate exploration, long offset multichannel seismic data acquired using by the 4km streamer length in Ulleung basin of the East Sea. The dataset was processed to define the BSRs (Bottom Simulating Reflectors) and to estimate the amount of gas hydrates. Confirmation of the presence of Bottom Simulating reflectors (BSR) and investigation of its physical properties from seismic section are important for gas hydrate detection. Specially, faster interval velocity overlying slower interval velocity indicates the likely presences of gas hydrate above BSR and free gas underneath BSR. In consequence, estimation of correct interval velocities and analysis of their spatial variations are critical processes for gas hydrate detection using seismic reflection data. Using Dix's equation, Root Mean Square (RMS) velocities can be converted into interval velocities. However, it is not a proper way to investigate interval velocities above and below BSR considering the fact that RMS velocities have poor resolution and correctness and the assumption that interval velocities increase along the depth. Therefore, we incorporated Migration Velocity Analysis (MVA) software produced by Landmark CO. to estimate correct interval velocities in detail. MVA is a process to yield velocities of sediments between layers using Common Mid Point (CMP) gathered seismic data. The CMP gathered data for MVA should be produced after basic processing steps to enhance the signal to noise ratio of the first reflections. Prestack depth migrated section is produced using interval velocities and interval velocities are key parameters governing qualities of prestack depth migration section. Correctness of interval velocities can be examined by the presence of Residual Move Out (RMO) on CMP gathered data. If there is no RMO, peaks of primary reflection events are flat in horizontal direction for all offsets of Common Reflection Point (CRP) gathers and it proves that prestack depth migration is done with correct velocity field. Used method in this study, Tomographic inversion needs two initial input data. One is the dataset obtained from the results of preprocessing by removing multiples and noise and stacked partially. The other is the depth domain velocity model build by smoothing and editing the interval velocity converted from RMS velocity. After the three times iteration of tomography inversion, Optimum interval velocity field can be fixed. The conclusion of this study as follow, the final Interval velocity around the BSR decreased to 1400 m/s from 2500 m/s abruptly. BSR is showed about 200m depth under the seabottom

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.552-559
• /
• 2011

Recently, the eddy current testing(ECT), alternating current field testing, magnetic flux leakage testing and remote field testing have been used as a nondestructive evaluation method based on the electromagnetic induction phenomenon. The eddy current testing is now widely accepted as a NDE method for the heat exchanger tube in the electric power industry, chemical, shipbuilding, and military. The ECT system mainly consists of the synthesizer module, analog module, analog-to-digital converter, power supplier, and data acquisition and analysis program. In the previous study, the synthesizer module and the analog module which is essential to the ECT system were primarily developed, and in this study the data acquisition and analysis program were developed. The operation system for this program is based on the Windows 7, and optimized for the Korean users, and the specific feature of this program using setup wizard enables inspector to make a setup easily for acquisition and analysis of ECT data. In this paper, the configuration and functions of eddy current data acquisition and analysis program will be introduced.

• Geophysics and Geophysical Exploration
• /
• v.26 no.3
• /
• pp.138-149
• /
• 2023

In geoscience and engineering the geological characteristics of sediment strata is crucial and possible if reliable borehole logging and seismic data are available. To investigate the characteristics of the shallow strata in the Korea Strait, laboratory sonic logs were obtained from deep borehole data and seismic section. In this study, we integrated and analyzed the sonic log data obtained from the drilling core (down to a depth of 200 m below the seabed) and multichannel seismic section. The correlation value was increased from 15% to 45% through time-depth conversion. An initial model of P-wave impedance was set, and the results were compared by performing model-based, band-limited, and sparse-spike inversions. The derived P-impedance distributions exhibited differences between sediment-dominant and unconsolidated layers. The P-impedance inversion process can be used as a framework for an integrated analysis of additional core logs and seismic data in the future. Furthermore, the derived P-impedance can be used to detect shallow gas-saturated regions or faults in the shallow sediment. As domestic deep drilling is being performed continuously for identifying the characteristics of carbon dioxide storage candidates and evaluating resources, the applicability of the integrated inversion will increase in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2327-2332
• /
• 2011

Recently, the increase of loading amount on cargo ships due to the automation of loading process results in much complex ship operation. For this reason, NMEA-0183 based on RS-422,485 and NMEA-2000 based on CAN communication methods have been usually used as a standardized method in the marin electric interfacing equipments. In this paper, a general NMEA-0183 protocol was designed to support 7-channel NMEA-0183 serial communication data, which can receive 3-channel 16 bits ADC and 2-channel pulse using SPI(Serial Peripheral Interface). In particular, this method was designed for ship communication requires 7 important factors. Also in this study, using the minimization of the proposed method and realizing the monitoring system based on PC, the effectiveness of multichannel indicator system was proposed.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.99-106
• /
• 2003

In this paper, a method of discriminating EEG for diagnoses of mental activity is proposed. The proposed method for classification of schizophrenia and normal EEG is based on the wavelet transform and the artificial neural network. The wavelet coefficients of $\alpha$ band, $\beta$ band, $\theta$ band, and $\delta$ band are obtained using the wavelet transform. The magnitude, mean, and variance of wavelet coefficients for each EEG band are applied to the input data of the system's ANN. The architecture of the ANN s a four layered feedforward network with two hidden layer which implements the error back propagation learning algorithm. Through the classification of schizophrenia composed of 19 ANNs corresponding to 19 channels, the classifying system show that it can classify the 100% of the normal EEG group and the 86.67% of the schizophrenia EEG group.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.273-273
• /
• 1996

Recently a novel in vivo approach in dogs, using a regional segmental intestinal perfusion technique, has been developed. The perfusion tube consists of a highly sophisticated multichannel tube with two inflatable occluding balloons, which are placed in 10cm apart. The tube was introduced orally from the stomach through the upper jejunum under the guidance of solid-state pH meter. In the present study, four healthy dogs were infused in the proximal jejunum on two periods. The two perfusion experiments used the same flow rate, 2 $m\ell$/min, and the same perfusion solution to determine the intrasubject variability. The mean (${\pm}$ S. E.) fractions of ranitidine absorbed calculated from the perfusion data were 21.32${\pm}$2.01% (n=3) (1st period), 27.88 ${\pm}$ 17.54% (n=4) (2nd period), respectively. The effective permeabilities (Peffs${\times}$10$\^$4/) of ranitidine were 1.51${\pm}$0.47cm/sec (n=3) (1st period), 1.50 ${\pm}$ 0.31 cm/sec (n=4) (2nd period), respectively. The pH and osmolarity of perfusion solution were 7.50 ${\pm}$ 0.03 and 300 ${\pm}$ 0.06 mOsm/L, There was no significant intrasubject variation. Mixing equilibrium (steady-state) was reached at about 50 min. l-Phenylalanine was absorbed almost completely. Intrinsic intestinal wall permeability of ranitidine showed low permeable characteristics, suggesting permeability-limited absorption. The absorption of 1-phenylalanine, an actively transported nutrient, was not inhibited by ranitidine. The low intestinal membrane permeability is one of the important factors responsible for the variable oral absorption of ranitidine. Supported by FDA Grant FD01462-04 and KOSEF Grant.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.2
• /
• pp.17-31
• /
• 2020

In the field of environmental landscape architecture, the internet medium is used as an effective communication tool not only in the private level but also in the policy level. Recently, the active utilization of mobile web service is emphasized as the time changes, but there is not much improvement or advance in services due to lack of relevant studies. Therefore, this study is intended to provide basic data needed for improvement and advance by researching the quality of mobile web service among multichannel services provided in environmental landscape architecture related internet media. The model for measuring service quality is SERVQUAL, which was verified in the study of Choi(2015), Choi and Koo(2016), and the final valid samples are total 230. First, the subjects were analyzed as the representative media that are possible to acquire comprehensive knowledge related to environmental landscape architecture. Second, the highest importance level in each subsection was 'protection and security maintenance of customer information' followed by 'Reliability about accurate information supply'. Regarding performance level, 'Reliability about accurate information supply' and 'professional knowledge to communicate with users' are highly evaluated. Third, regarding Importance-Performance Analysis(IPA), the first priority management should is 'Tangibles', and the next are 'Responsibility' and 'Empathy'. The ones for maintenance of the status quo are 'Reliability' and 'Assurance', and there is none for effort reduction. Meanwhile, regarding the importance of each factor and difference in the quality of PC web service and mobile web service studied before, the biggest difference is in 'Tangibles', followed by 'Assurance', 'Empathy', 'Responsibility' and 'Reliability'. It is suggested that the revitalization of Landscape information science(LB1106) presented in the National Science&Technology Standard Classification System is needed. In the future, it is necessary to research the change trend on users' response through continuous evaluation of improved mobile web service.