• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.880-882
• /
• 2004

This paper presents the design and simulation results of 7 waveguide dielectric rod array antennas for 7 channel DBF(Digital beamformer) receivers for stratospheric system. A waveguide. dielectric antenna type, which has FTEP(Flat-toped element pattern) to manufacture easily. Also, the calculated element patterns according to the permittivity are compared. The designed antenna will be used for generating multibeam radiation pattern by means DBF.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.316-320
• /
• 2004

This paper describes Ka-band antenna performance analysis of COMS satellite. The key parameters of the antenna system are optimal antenna diameter, feed horn type and horn size, F/D, and the coordinate of offset horns. The paper deals with the method to determine design core parameters of optimal antenna diameter, feed horn type and horn size, F/D, and the coordinate of offset horns, and the performances of design result.

• Publications of The Korean Astronomical Society
• /
• v.28 no.1
• /
• pp.7-13
• /
• 2013

We present a multi-dimensional reduction method of the surveyed cube database obtained using a single- dish radio telescope in Taeduk Radio Astronomy Observatory (TRAO). The multibeam receiver system installed at the 14 m telescope in TRAO was not optimized at the initial stage, though it became more stabilized in the following season. We conducted a Galactic Plane survey using the multibeam receiver system. We show that the noise level of the first part of the survey was higher than expected, and a special reduction process seemed to be definitely required. Along with a brief review of classical methods, a multi-dimensional method of reduction is introduced; It is found that the 'background' task within IRAF (Image Reduction and Analysis Facility) can be applied to all three directions of the cube database. Various statistics of reduction results is tested using several IRAF tasks. The rms value of raw survey data is 0.241 K, and after primitive baseline subtraction and elimination of bad channel sections, the rms value turned out to be 0.210 K. After the one-dimensional reduction using 'background' task, the rms value is estimated to be 0.176 K. The average rms of the final reduced image is 0.137 K. Thus, the image quality is found to be improved about 43% using the new reduction method.

• International Journal of Computer Science & Network Security
• /
• v.24 no.3
• /
• pp.71-82
• /
• 2024

This paper proposes a new communication system for e-learning applications to mitigate the negative impacts of COVID-19 where the online massive demands impact the current commu-nications systems infrastructures and capabilities. The proposed system utilizes high-altitude platforms (HAPs) for fast and efficient connectivity provision to bridge the communication in-frastructure gap in the current pandemic. The system model is investigated, and its performance is analyzed using adaptive antenna arrays to achieve high quality and high transmission data rates at the student premises. In addition, the single beam and multibeam HAP radio coverage scenarios are examined using tapered uniform concentric circular arrays to achieve feasible communication link requirements.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.330-330
• /
• 2002

The combination of Multi-Beam Echo Sounder swath bathymetry and high-resolution towed Sidescan sonar provides a powerful method of examination about hydrographic survey results. In this paper, we investigate the fast method of 3D bathymetric reconstruction with the Digital Sidescan sonar(Benthos SIS 1500) and Shallow Multi-Beam Echo Sounder(Reson Seabat 8125). The Seabat 8125 is a 455KHz high resolution focused Multibeam echo sounder(MBES) system which measures the relative water depth across a wide swath perpendicular to a vessel's track. The Benthos SIS1500 is a chirp(nominal fq. 200KHz) sonar which map the topographical features & sediment texture of ocean bottom using backscattered amplitude. We generates the very large 3D bathymetric texture mapping model with the Helical System's HHViewer and describes additional benefits of combining MBES and Sidescan Sonar imagery, the removal of geometric distortions in the model and a deterministic sounding noise.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.613-616
• /
• 2012

A multi-spot-beam satellite is an attractive technique for future satellite communications since it can support high data rates by projecting high power density to each spot beam and can reuse a frequency in different cells to increase the total system capacity. In this letter, we propose a resource management technique adjusting the bandwidth of each beam to minimize the difference between the traffic demand and allocated capacity. This represents a reasonable solution for dynamic bandwidth allocation, considering a trade-off between the maximum total capacity and fairness among the spot beams with different traffic demands.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.218-223
• /
• 1999

국제 수로 기구(IHO, International Hydrographic Organization)에서는 해도제작을 위한 해양조사의 기준을 마련하고, 전세계적으로 사용되는 해도의 정확도를 표준화하고 있다. IHO에서는 탐사 기술의 발달을 반영하여, 기존의 단 빔 음향 측심기 이외에도 멀티 빔 음향 측심기(Multibeam Echo Sounder)와 사이드 스캔 소나(Side Scan Sonar)를 이용한 해양 탐사 시에 요구되는 정확도와 탐사 자료에 대한 메타 데이터(Metadata)의 작성을 요구하고 있다. 본 논문은 수로 측량에서 얻어진 측량 자료들의 처리절차와 자료관리 기법에 대한 연구이다. IHO 해양탐사 기준에 맞는 탐사 자료 처리와, 메타 데이터를 자동으로 생성하여 측량자료관리 DB구축 및 관리를 주 기능으로 하는 시스템을 설계하고 구현한다. 특히, 본 논문은 해양 탐사 자료 처리 시스템을 개발하기 위하여, 해양 자료 처리 과정을 표준화하고, 국제적 해양 자료의 교환 표준인 MGD77과 호환 가능한 메타 데이터를 자동 생성하며, 1Hz로 수집되는 GPS 측위자료로부터 특징점(Waypoint)을 정의하고, 이를 추출하여 측심선을 벡터화 (Trackline Vectorizing) 하는 알고리즘을 구현한다. 개발된 시스템은 현재 국립 해양조사원의 해양2000호에서 획득된 탐사자료에 적용, 운영되고 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.11a
• /
• pp.207-210
• /
• 2006

자동차 추돌 방지용 레이더는 도로 사정이나 기후에 따른 운전자의 인지 및 판단이 불가능한 상황에서도 차량 간의 추돌을 예방할 수 있는 시스템이다. 현재까지 연구 개발된 차량용 레이더는 초음파나 밀리미터 웨이브 등을 이용하므로 가격이나 크기 등에서 경쟁력을 갖추지 못하고 있는 실정이다. 따라서 본 논문에서는 적외선 레이저 다이오드를 매트릭스 형태로 배열한 다중 파장 구조 방식을 제안하였다. 이는 악천후에서의 탐지 능력을 개선시킬 수 있다. 또한 의사 잡음 수열의 상관 특성을 이용하여 인접 차량의 레이저 신호에 의한 간섭 영향을 최소화시킬 수 있기 때문에 차세대 ITS 기술 선점 및 산업 경쟁력을 확보 등의 효과를 기대할 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.130-136
• /
• 2014

This paper reviews the research on silicon based phased array system operating from microwave to millimeter wave frequencies. First, the design of phase shifter using CMOS technology is presented. The passive phase shifter is applied to the transmit/receive module from one to 16 channel in a single chip. The 35 GHz 4-element T/R module consumes less than 200 mW both transmit and receive modes. The architecture can extend to 16-channel operating at 44 GHz, thereby improving transmit power and linearity. The Ku-band 2-antenna 4-element receiver was developed using active phase shifter based on vector sum method. It is important to minimize coupling between beams because the chip contains four independent beams. The method of coupling is presented and verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.8B
• /
• pp.819-825
• /
• 2002

Resolution 221 requests the ITU-R to conduct studies, as a matter of urgency, on the feasibility of utilizing HAPS system as a base station to provide IMT-2000 services. And HAPS base stations should not cause harmful interference to the cellular IMT-2000 services. To study on the interference between HAPS system and cellular system is divided into two cases. One is the interference into HAPS system from the cellular system and the other is the interference into the cellular system from HAPS system. Since the former case has been already studied[1]. this paper describes the interference the interference to the noise power ration(I/N) with various parameters, such as the transmitting power, the number of users per cell, maximum antenna gain and the multibeam cell radius of HAPS. With the proposed estimation, we can determine the optimum values of various parameters in HAPS IMT-2000 system.