With the decrease of the agricultural population in Korea, the workers who is vulnerable to labor are increasing in agricultural industry because of aging, feminization of population. They are exposed in poor working environment with higher temperature and concentrations of dust, gas. Higher concentration of harmful gas and dust can cause chronic and acute disease to workers depending on exposure intensity and frequency. In order to improve the working environment in the livestock facilities, It is important to secure monitoring data of the thermal environment and the concentration of harmful gases and fine dust. Multi-point measurement was performed to analyze the regional environmental conditions in the pig rooms. When analyzing the working environment, video monitoring was conducted to analyze the concentration changes of ammonia, hydrogen sulfide and fine dust according to worker movement and work type. Ammonia and hydrogen sulfide monitoring result showed 1.5~2 times higher concentrations than other work when working in the pigs living zone, and 2~4 times higher than other work when working to increase the activity of pigs. In the case of fine dust, the result was 1.3 times higher than the worker's exposure standard in a specific work. The concentrations of gases and dusts from pig farms are not of concern for acute poisoning in normal work, but there is a risk of chronic respiratory disease if they are continuously exposed. Accordingly, there is a need for development of work environment monitoring device tailored to workers and preparation of alternatives.
This study was performed to develop a hot water boiler system with small scale automatic rice hull furnace for the multi-purpose use in the farm. For the experiment a prototype hot water boiler system with rice hull furnace was fabricated, which was equipped with automatic hull feeder, igniter and ash removal device. Optimum operational conditions of the prototype: system were analyzed. The results arc summarized as follows. 1. The temperature measured right above the burning surface should be higher than $500^{\circ}C$ combustion. 2. The top zone of the combustion chamber was the most suitable location of the thermocouple to pick up the control temperature for the automatic operation of the rice hull furnace. 3. The content of carbon monoxide in the flue gas was increased with the filling height of burning material but it was less than 0.3 percent in volume in this experiment. When the filling height was expressed as the ratio of rice hull feed rate to the volume of the combustion chamber above the burning surface, the optimum ratio was about $150kg/m^3-h$. 4. The combustion efficiency of the prototype was higher than 95 percent when the feed rate was 1.1 to 2.3 kg/h and moisture content of rice hull was 22.4 percent (w.b.) or less. 5. It was estimated that the optimum operational conditions of the system were 1.3 to 2.0 kg/h in feed rate, 70 to 100 percent in excess air and 500 to $510^{\circ}C$ in control temperature. 6. The efficiency of coil heal exchanger increased with a decrease in feed rate of rice hull. When the rice hull feed rates were 1.1, 1.7 and 2.3 kg/h, the efficiencies of coil heat exchanger were about 34, 30 and 25 percent and heat transfer rates were 5.7, 7.6 and 8.8 MJ/h, respectively. When the flat plate heat exchanger was used in addition to the coil heat exchanger, the efficiency of the heat exchanger system increased to 48 percent.
A number of the retail and traditional market customer is decrease, whereas that of the supermarket in department-store customers is increase. This case suggests that customers have a preference for much more comfortable and pleasant shopping places And making a reasonable purchase in the supermarkets where we can find various goods and price zone, is now garden variety. It is a current course that once the manager ask an architect for multi-functional space design in department-store and then the architect compose a team and start to design. Of course, the team of planner thinking manage give the design team the basic material data such as commerce analysis and the use of each layer in the department store but, the design team solve the assignment by architectural form, functional space plan and the limited architecture law, After establishing general design for architecture, we can ask shopping-mall distribution, products display and interior design of the interior design team. so it is inevitable that the interior design team concerning M$\cdot$D can find lots of complementary factors with architecture design. The purpose of this study is analyzing the differences of architecture design, which has to accept the limited law and interior design concerning M$\cdot$D, satisfying the structure and the law in the future design for the department-store. Also the purpose of this thesis is suggestion the items architects and interior designers research into together to make the inner space ideally.
본 논문에서는 현재 3GPP에서 진행되고 있는 차세대 이동통신 기술 표준, 즉 LTE 시스템의 하향 링크 전송방식의 수신성능을 향상시키기 위해 기지국(BS)과 단말(MS) 사이에 릴레이(RS) 설치를 제안하고, BS의 위치와 설치된 RS의 거리를 각각 500m, 1000m로 하고 RS의 전송방식을 OFDMA와 SC-FDMA를 선택함으로써 수신성능을 높이기 위한 연구를 수행 하였다. 연구결과 RS의 위치가 BS와 가까울수록 RS에서는 SC-FDMA를 사용하는 것이 좋게 나왔고, 반대로 BS와 RS의 거리가 멀어질수록 RS에서는 OFDMA를 사용하는 것의 성능이 좋은 것으로 나왔다. 또한 BS와 MS 거리의 중심지역에서는 그 상황에 맞는 전송방식을 사용함으로써 시스템의 수신성능을 향상시킬 수 있었다.
The first stage blade of a gas turbine was operated under a severe environment which included both $1300^{\circ}C$ hot gas and thermal stress. To obtain high efficiency, a thermal barrier coating (TBC) and an internal cooling system were used to increase the firing temperature. The TBC consists of multi-layer coatings of a ceramic outer layer (top coating) and a metallic inner layer (bond coat) between the ceramic and the substrate. The top and bond coating layer respectively act as a thermal barrier against hot gas and a buffer against the thermal stress caused by the difference in the thermal expansion coefficient between the ceramic and the substrate. Particularly, the bondcoating layer improves the resistance against oxidation and corrosion. An inter-diffusion layer is generated between the bond coat and the substrate due to the exposure at a high temperature and the diffusion phenomenon. A thickness measurement result showed that the bond coat of the suction side was thicker than that of the pressure side. The thickest inter-diffusion zone was noted at SS1 (Suction Side point 1). A chemical composition analysis of the bond coat showed aluminum depletion around the inter-diffusion layer. In this study, we evaluated the properties of the bond coat and the degradation of the coating layer used on a $1300^{\circ}C$-class gas turbine blade. Moreover, the operation temperature of the blade was estimated using the Arrhenius equation and this was compared with the result of a thermal analysis.
Yeongdong has frequently suffered from severe snowstorms, which generally give rise to societal and economic damages to the region in winter. In order to understand its mechanism, there has been a long-term measurement campaign, based on the rawinsonde measurements for every snowfall event at Gangneung since 2014. The previous observations showed that a typical heavy snowfall is generally accompanied with northerly or northeasterly flow below the snow clouds, generated by cold air outbreak over the relatively warmer East Sea. An intensive and multi-institutional measurement campaign has been launched in 2019 mainly in collaboration with Gangwon Regional Office of Meteorology and National Institute of Meteorological Studies of Korean Meteorological Administration, with a special emphasis on winter snowfall and spring windstorm altogether. The experiment spanned largely from February to April with comprehensive measurements of frequent rawinsonde measurements at a super site (Gangneung) with continuous remote sensings of wind profiler, microwave radiometers and weather radar etc. Additional measurements were added to the campaign, such as aircraft dropsonde measurements and shipboard rawinsonde soundings. One of the fruitful outcomes is, so far, to identify a couple of cold air damming occurrences, featuring lowest temperature below 1 km, which hamper the convergence zone and snow clouds from penetrating inland, and eventually make it harder to forecast snowfall in terms of its location and timing. This kind of comprehensive observation campaign with continuous remote sensings and intensive additional measurement platforms should be conducted to understand various orographic precipitation in the complex terrain like Yeongdong.
Guntur, Robertus Dole;Kingsley, Jonathan;Islam, Fakir M. Amirul
Journal of Preventive Medicine and Public Health
/
제55권1호
/
pp.68-79
/
2022
Objectives: This study investigated associations between ethnicity and malaria awareness in East Nusa Tenggara Province (ENTP), Indonesia. Methods: A community-based cross-sectional study was conducted upon 1503 adults recruited by multi-stage cluster random sampling. A malaria awareness questionnaire was used to collect data, according to which participants were classified as aware or unaware of malaria. Logistic regression was applied to quantify the strength of associations of factors with malaria awareness. Results: The participation rate in this study was high (99.5%). The participants were distributed relatively evenly among the Manggarai, Atoni, and Sumba ethnicities (33.0, 32.3, and 30.2%, respectively). Malaria awareness was significantly different amongst these groups; it was most common in the Manggarai ethnicity (65.1%; 95% confidence interval [CI], 59.9 to 70.3) and least common in the Sumba ethnicity (35.0%; 95% CI, 27.6 to 42.4). The most prominent factor influencing the malaria awareness in the Sumba and Manggarai ethnicities was education level, whilst it was socioeconomic status (SES) in the Atoni ethnicity. The likelihood of malaria awareness was significantly higher in adults with an education level of diploma or above (adjusted odds ratio [aOR], 21.4; 95% CI, 3.59 to 127.7 for Manggarai; aOR, 6.94; 95% CI, 1.81 to 26.6 for Sumba). Malaria awareness was significantly more common amongst high-SES adults in the Atoni group (aOR, 24.48; 95% CI, 8.79 to 68.21). Conclusions: Low education levels and low SES were prominent contributors to lower levels of malaria awareness in rural ENTP. Interventions should focus on improving malaria awareness to these groups to support the Indonesian government's national commitment to achieve a malaria elimination zone by 2030.
본 연구에서는 고밀 시가화지역 내 녹지들의 경관생태학적 특성과 연결성을 분석함으로써 잠재적인 녹지패치들의 활용가능성을 평가하고, 이를 통해 생활권 내 녹지 네트워크를 형성하기 위한 도시정원의 도입 방안을 제시하고자 한다. 이를 위해, 서울시에서 공원 서비스 소외지역 및 중점녹화지구로 분류된 역삼동 일대를 대상지로 선정하였다. 우선, 대상지 일대 고밀 시가화지역 내 녹지의 현황을 가로녹지, 개인정원, 자투리공지, 공원, 옥상정원의 5개 항목으로 분류하여 파악하고, 녹지 네트워크 분석 및 잠재적 녹지의 가치를 평가하기 위하여 FRAGSTATS를 통한 경관지수 분석 및 다중버퍼생성분석을 통한 연결성평가를 실시하였다. 연구결과, 대상지 내 녹지면적은 가로녹지, 개인정원, 자투리공지, 공원, 옥상정원의 순으로 분포되어 있었다. 녹지의 유형별 특징으로는 가로녹지의 경우 핵심지역면적(TCA)이 $1,618m^2$로 가장 높은 값을 보여 선형 연결 녹지임에도 공원($1,128m^2$)에 상응하는 크기를 보였고, 개인정원의 경우 패치의 모양이 불규칙하면서도(ED=78.1m/ha), 최근린 평균거리가 33.9m로 낮아 사유지내에서의 자유로운 정원조성을 통해 고밀 시가화지역의 녹지군을 형성할 수 있음을 나타내었다. 자투리공지의 경우 대상지 내 가장 고루 분포하는(LPI=5.7%, SHEI=0.9) 녹지유형이나 외부교란에 노출되어 있어($TCA=66m^2$), 이를 고려한 정원으로의 활용방안을 시사하였다. 대상지 내 녹지네트워크 형성에 있어서도 50m의 버퍼 범위를 연결녹지로 상정한 경우 전체 대상지의 84%가 소규모 녹지네트워크에 의해 커버되는 것으로 나타났으며, 자투리공지의 연결만으로도(27%) 가로녹지(26%) 조성에 상응하는 네트워크 구축효과가 기대되었다. 이에, 주택지역을 중심으로 다양한 활동이 가능한 자투리 공공녹지에 지역기반의 커뮤니티 가든 등 도시정원 조성을 장려하고, 가로녹지, 개인정원, 옥상정원도 동시에 적극 활용함으로써 고밀 시가화지역 내에 녹지네트워크를 효과적으로 구축할 수 있다고 판단되었다.
본 연구에서는 2005 - 2006년 기간 동안 국내 인공호의 환경영향평가를 위해 LEHA 다변수 생태모형(Lentic Ecosystem Health Assessment Model)을 청평호에 적용하였고, 생태 건강도 모델값을 산정하였다. LEHA 생태 평가모형은 생물학적 변수($B_p$), 물리적 변수($P_p$), 화학적 변수($C_p$)의 11개 주요 메트릭으로 구성되었고, 이를 통합하여 생태 건강도 등급을 평가하였다. 생물학적 변수($B_p$)는 수환경의 질적 저하에 따라서 감소하는 민감종 메트릭($M_2$, NSS) 및 충식종 메트릭($M_5$, % $I_n$)이 이용되었고, 두 메트릭 모델값은 각각 1.5%, 32.4%로서 낮게 나타났다. 반면, 내성종($M_3$, % $T_s$)과 잡식종 메트릭($M_4$, % $O_m$) 값은 43%, 62%로서 높게 나타나 호수생태계의 질적 저하가 확인되었다. 물리적 서식지 변수($P_p$)는 수변 식피율($M_9$, % $V_c$)로서 1차 조사에 비해 2차 조사에 높게 나타났으며, 상류에서 하류로 갈수록 메트릭 모델 값이 감소하는 것으로 나타났다. 이는 정수역의 증가로 서식환경의 단순화와 인근 수체에서 실시되고 있는 잦은 골재 채취로 인한 서식지의 하상구조 변경이 악영향을 준 것으로 사료되었다. 한편, 화학적 수질특성 변수($C_p$)는 수체의 이온(양이온/음이온) 특성을 나타내는 전기전도도($M_{10}$, $C_I$)와 부영양 상태를 평가하는 Chl-a의 부영양화 지수($M_{11}$, $TSI_{CHL}$)로서 메트릭 모델값은 계절별 변이는 크게 나타났고, 지점 간의 공간변이는 미미한 것으로 나타나, "양호상태"로 평가되었다. LEHA 다변수 모델에 의거한 청평호의 환경영향평가에 의하면, 생태 건강도 LEHA 모델값은 1차 조사에서 30.7로 "보통-악화상태", 2차 조사에서 28로 "악화상태"를 보여 계절 변이 특성을 보였다. 지점별 LEHA 모델값은 호수의 정수대(S5)에서 28로 최소치를 보였고, 그 외 지점들도 29 - 30으로 지점 간 미미한 차이를 보였다. 청평호의 종합적인 환경영향평가에 의하면, 이 화학적인 수질기준 측면에서는 "양호상태"를 보인 반면, 생물학적 기준에서는 "악화상태"를 보였는데, 이는 빈번한 준설작업으로 인한 물리적 서식지 교란이 영향을 준 것으로 사료되었다.
본 연구는 로즈마리 다단재배 시 근권부 용적이 어린순 생산성에 미치는 영향을 구명하고자 수행되었다. 정아를 제거한 커먼 로즈마리의 중간부 삽수 10cm를 128공 트레이에 삽목하여 발근시킨뒤125, 200, 550, 750, 1,300 및 2,000mL의 용기에 이식하여 1, 2년생 삽목묘 어린순의 생육특성과 수량성을 비교하였다. 1년생 로즈마리의 경우 초기 생육(이식 후 30일)은 용기 550mL 이상에서 처리 간 뚜렷한 차이가 없었으나, 2년생 로즈마리의 경우 용기가 클수록 생육이 비례하는 경향을 보였다. 1, 2년생 로즈마리의 지하부 생체중은 용기 550mL에서 7월 25일 조사 시 각각6.9g, 24.4g, 11월 24일 조사 시 각각10.3g, 24.9g으로 가장 낮았고, 용기 750-2,000mL에서는 처리 간 차이가 보이지 않았다. 반면 지상부 생체중은 1년생 로즈마리의 경우 용기가 클수록 증가하다가 1,300mL 이상에서는 통계적 차이가 없었으며, 2년생 로즈마리 역시 용기가 클수록 생체중이 유의하게 높았다. 어린순 품질은 1년생 로즈마리의 경우 용기 2,000mL에서 가장 우수하였으나, 2년생 로즈마리의 경우 시기별 품질 차이를 보였다. 단위 화분당 어린순 생산성은 1,300mL에서 가장 높았으나, 단위 면적당으로 환산할 경우 750mL에서 가장 우수하게 관찰되었다. 따라서 로즈마리 어린순 다단재배를 통한 집약생산에 가장 적합한 용기 크기는 750mL로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.